Add protection for vdev & peer while traversing during collecting
control frame stats.
Change-Id: I1e8e4e5f6f94b35644e03ddafc03b0d885d27972
CRs-Fixed: 2189230
Add htt tx and rx structs from HTT to cdp_pdev_stats.
These Fw tx and rx stats are obtained through HTT events.
athstats application uses cdp_pdev_stats that contains host stats
and fw stats.
Change-Id: Ia063f406bdc6d32a684c4026b8425ecc96faa3db
CRs-Fixed: 2190793
Vdev detach does not happen till all the peers associated
the vdev are deleted. because of DBDC repeater feature,
we are creating a self peer even for STA VAP and were not
deleteing it properly causing a memory leak. This change
fixes this issue.
Change-Id: I39d271bef5d5adc6e94333a3fbc483bdb7067f27
CRs-Fixed: 2193590
Tx completion success counters are not being updated correctly.
Accumulate successful completions in tx_success variable.
Change-Id: I290e581e93e03ad23e349c9df7834174d6d3a787
CRs-Fixed: 2191599
As part of init FR, osif_pdev object stores pdev object, so same has
to be passed as param.
Change-Id: Ic9c41e5ef54fdb80898f10f27a86970e76d1f24c
CRs-Fixed: 2188451
Add change in driver to get RSSI of non associated clients.
This is done in 2 levels of filtering
1. Send WMI to FW to configure BSSID in HW
2. Filter the neighbour BSSID packets received in host for
the configured client mac
Change-Id: I6b684b83cecb308dac326056aa77537aee07b933
CRs-Fixed: 2148773
1. After mem_free() is done for a vdev without peers,
set it to NULL so that later check can catch it.If not,
it could be used to increment stats.
2. After a bss peer is freed, mark it as NULL so that
it is not used again to update stats.
Change-Id: I82e73c29c1409aac1af735ab849e8b07d387acf2
Change REO queue descriptor delete sequence to flush base and
extension descriptors separately, since flushing base descriptor
alone results in extensions flushed by HW much later,
sometimes after freeing descriptor memory, causing use-after-free
corruptions. Also increase REO command and status ring sizes
since number of commands per RX TID flush has increased with
this change.
Fix interrupt batch count setting for non pkt/buffer rings,
which includes REO status ring.
Also remove callbacks during reo command list destroy,
done as part of SOC detach. This should not be done since
callbacks will access stale data structures that are freed
as part of PDEV/SOC detach.
Change-Id: I4337454d3f53cc0b3c3014ef07cc2ba13cfebb18
CRs-Fixed: 2175989
Add APIs to be used by extended DP modules to attach/detach
their respective handles with Core DP module.
Change-Id: I63cf0883f7462a11b49666bda697c7e872d7b925
Added CDP callback APIs so the DBDC repeater module
outside of cmn_dev can add, delete and update the AST
entries. Also with this change the sending of wds cmds
to fw is tied to adding AST, deleteing AST and updating
the AST entries.
Change-Id: I48d31962236860f50e16b771abaf3b8825b798df
Inactivity timer initialization is moved from dp
attach to soc attach as the timer is being
initialized multiple times in case of multiple
radios
Change-Id: I85d1d8710ccc7531c43ec82378c3ca0b65d26cf9
1. Assert if length received from FW is not equal to
the expected length
2. Count the number of PPDU stats received by host and
print in "iwpriv athX txrx_stats 260"
3. Optimize the PPDU stats tag mask sent to FW for
enhanced stats enabling
Change-Id: I60019de93bb3914955a03546504efc820c960746
CRs-Fixed: 2170704
Assert happened in rx path because rx reo rings setup
is done and after that default routing information is
updated, if any time elasped any buffer received in
exception ring falsely. Setting route information before
intialize.
Change-Id: I48c7292db0823d3eac639429f956dff1fcc41cae
To expose cdp_pdev_stats to athstats, move cdp_stats from
cdp_txrx_cmn_struct.h to cdp_txrx_stats_struct.h and include
cdp_txrx_stats_struct.h wherever needed
Change-Id: I0e86527d47f5c6056a3bfbf5e8151594879427f3
CRs-Fixed: 2183725
STATUS_DONE is missing sometimes in monitor status ring,
causing stalled processing in host and backpressure to RXDMA.
Adding a WAR to skip such entries.
Also increased the size of monitor link descriptor ring since
multiple descriptors are used for large MPDUs.
Change-Id: I556b4196482ed738471afc1f7e7b73cf3f8fbc51
Set link descriptor memory address to NULL after freeing to ensure
it is not freed again. This is seen with soc_detach called during
attach failures.
Change-Id: I7338cb8c64fcb652c95f42bcb9e998a6f043cecf
CRs-Fixed: 2160703
pass psoc/pdev object as ctrl pointers to instead of legacy objects.
It introduces new APIs to get feature pointers of psoc/pdev.
DP attach API param modified to pass ctrl psoc (psoc object)
Change-Id: I3d83f28c3e72e5ee984a4220b9d5cf3c4522b501
CRs-Fixed: 2177109
dp_tx_send_exception is an exception path that transmits frames
through FW by setting DP_TX_DESC_FLAG_TO_FW
Change-Id: Id6abfcd2bf060c4fe3aaca91634f3be501530a7e
CRs-Fixed: 2176814
Move the peer Rx activity to PPDU_stats_handler
which is common for both NSS offload and Host datapath modes.
Change-Id: I06c3dd14d117cc291e3b19076ddfc7f3be00e602
CRs-Fixed: 2176385
1. find_first_bit API returns Size value if it doesn’t find any bit set.
This was causing VOICE AC counter to go high even for TID 0
2. Reset stats was not resetting the stats immediately
3. Added checks to avoid spurious stats increment
4. Detect data/mgmt pkt to avoid spurious stats increment
Change-Id: Ic9c5695fc7bdf58d1237e7e20bb79378a02a21f6
Add tid to the defrag waitlist & timeout if further fragments are not
received.
Change-Id: Iff2d2c23fe796cf70bcc6aa43ab02a308a33ee9f
CRs-Fixed: 2174750
REO queue setup is getting triggered from processing
pending null queue exceptions in WBM release ring, after
sending peer delete command to FW, but before peer unmap
is received, causing target assert. Mark peer deletion
before sending peer delete command to avoid this.
Change-Id: I2d85d01e049cb37d9321beeee8e41f44e40e68ad
CRs-Fixed: 2155420
cck rates were getting updated for ofdm rates
and nss index were getting wrongly incremented
fixed the same
Corrected sgi and preamble too
Change-Id: I2dabb685de6e0bd4ba5094845cde228b3c32e2a9
* Update the pkt_type counters correctly within the array bound
* Add support for NSS counters on Tx side
* Update ampdu flag in PPDU struct
* Add support for ampdu flag in hal_ppdu struct
Change-Id: I79ea52727124ea4be4d82912cb2513ea58e2af10
Remove dependency of extender ap on VAP layer and radio(ic) layer data
structure
Change-Id: Ib336f518847abd1b29f5ea3cfd1a508dc2cd14e8
CRs-Fixed: 2148247
The pointer to peer is dereferenced after memory free in peer
_unref_delete function. Fix the issue by changing function
call sequence.
CRs-Fixed: 2167698
Change-Id: Iebd8f958bde4964c16a3c312d037e8f06e319350
Sending all frames to firmware will have high throughput impact.
Queue mesh frames also to TCL/TQM and send cloned frame to firmware
only if meta header information is changed to update meta header
information. Increased meta info size as per new ext2 header.
Change-Id: I89ff27994477a5637979a9cd6a397286144b2535
CRs-Fixed: 2162643
Addba recieve/response logic has been implemented in
host for HE instead of in FW like VHT. setaddbaresp
is not hooked to the dp module yet to set the addba
response from userspace. Implement the required logic
for HE to support this command.
Change-Id: I49cceca299db06d41f2cafa690f5ba59e01f1f4a
CRs-fixed: 2163475
during peer delete we are trying to update peer stats to
vap_bss_peer, but in STA mode we do not have bss_peer,
this is resulting in an assert during peer delete in STA mode.
Change-Id: Ie302dd74caf2df3ffe0a57e9ecd22a0c31cbcb60
CRs-Fixed: 2168929
TX descriptors should be unmapped and freed when VDEV is detached.
Or else it will cause memory leak in qdf_mem.
CRs-Fixed: 2163178
Change-Id: I59da73787786f78c1f057e4daad7b4d53e7fbe4c
vdev stats are getting reset to zero when a peer disassoc
with the AP. the fix is basically update peer stats to
bss_peer just before we delete the peer.
Change-Id: Ibada4ab82fbb68f32df89bdbae8b172bc8973fe7
Added dp path function pointers for inact
timers and set params used in WifiSON
Load Balancing Daemon
Change-Id: Ic23d7b562b476c0fb92c8734b029a4e1632599a5
If hal_srng_setup() fails, memory allocated for srng
is not freed resulting in a leak. Free the memory in
that case. In future, return error to caller and
assert when invalid ring ID is used during setup.
Change-Id: I6f3a7494a5c5e861652f3a38d18c220cd9a6eef2
Added a check in RX path to detect multicast loopback packets in
qwrap mode. In qwrap mode, there are multiple station vaps and
multicast loopback packet from one station vap should not come into
the other station vap. Added a check for this by iterating through
the vap list and checking if any of the vdev mac address matches
with the source address of the packet.
Also added a new vdev parameter to check if qwrap isolation mode is
enabled. In qwrap isolation mode, loopback packets should not be
dropped.
Change-Id: I7d35bf657a87337871156e4caec9038432e23a87
CRs-fixed: 2149190
Add following changes in the context of PPDU stats
1. Mirror copy mode enhancements
2. Fix memory leak due to mgmt. TLV
3. Reset RX monitor lite ring when enhanced stats disabled
Change-Id: Ifb260929290bc483dc05b152a11cd675104f3a0d
Add support to display multicast packets stats. Also
avoid sending message to target-if layer for every MSDU
to update node statistics
Change-Id: I7bb73d97bd8a02a601d191040a9a5730a9584d3d
Stats counters for BW were not updated correctly
due to difference in mapping of BW on host and FW
Also fix the Rx Stats to account for TCP Ack count
Change-Id: I7e844a7032e7968c110c7a0f8c45b0349a5cb818
In wbm_err_process function we are releaseing the sw rx
descriptors at the end and we are calling replenish after
we processed all the pkts in wbm_release ring. FW team said
that the re-fill ring is empty for high throughput scenarios.
To avoid re-fill ring being empty replenish buffers
first and then process the nbufs later. Also free any invalid
peer MSDUs during pdev detach.
Change-Id: I3e1088a3df3658965ffb31e0e0420a37203ba70e