Add change to skip monitor ring configuration
for smart and lite monitor through dp_set_monitor_mode
API instead will be handled to configure
cdp_txrx_set_pdev_param from caller as required
during restart, stop and up path.
Change-Id: If842399c64601049efdf9233a83ede5ce368802c
CRs-Fixed: 2421573
cdp_rx_indication_ppdu structure is used to indicate ppdu stats to upper
layer. Use the size of this struct instead of hal_rx_ppdu_info struct
while allocating SKB for notifying this event to upper layer.
hal_rx_ppdu_info struct is smaller sized structure and this can cause
invalid access.
Change-Id: I0db5a04f6e8ca8d8d38ddc83bcb7859292b45ba1
CRs-Fixed: 2419923
Compare REO ring descriptor paddr with rx_desc->nbuf->cb->paddr,
possible corruption if they differ.
Change-Id: I064df12495a9934fe2396305a7a4a8cdeacdfd4f
CRs-Fixed: 2398155
Do not print rate statistics on the console or kernel logs. Excessive
logging in kernel messages can lead to kernel panic.
Change DP_PRINT_STATS to not print in kernel logs.
Note that this is an interim solution. Ideally these prints from DP
module should be QDF_TRACE_LEVEL_DEBUG and logged to QXDM. Currently
DEBUG trace level is disabled for DP module.
Change-Id: I54af98eda0dd4ea53ae20f25ced6b03287d8b4e4
CRs-Fixed: 2414635
Compiler threw error 'defined but not used [-Werror=unused-function]'
when macro DISABLE_MON_CONFIG defined.
Wrap those functions by DISABLE_MON_CONFIG, which used only
within DISABLE_MON_CONFIG.
Change-Id: Idd92b9c481d580a6ca3df39963fa98e11d9d0753
CRs-Fixed: 2418584
To avoid using qcacld code in cmn, when getting
wlan op mode, using op mode info from vdev rather
adapter.
Change-Id: Ida5a7aa6c793e955122a4bbf3bf0fa1fa5cbf7a3
CRs-Fixed: 2412317
For low mem config, use user configured max tx descriptors to limit the
allocation of software tx descriptors.
Use dp_txrx_pflow_update_pdev_params function to print stats and to update
pdev param.
Change-Id: I8fa6f0bb8841de68e8dc205ffcb0fde264f1b0e0
CRs-Fixed: 2414452
Use the time stamp taken during the updating of RSSI value to
calculate the time elapsed when the IOCTL call happens. Return
that value as delta age in ms.
Change-Id: I96d36a7a132b7a327d9d5a5ba3a318a82889ebd5
CRs-Fixed: 2394910
The rx descriptor may be invalid if RBM is incorrect.
Check the RBM value before fetching the rx descriptor.
Change-Id: I12cc99ceb31b8bbf0127591e1c275b13264eb80c
Several qdf_*_outline() APIs exist which are straight aliases to their
regular qdf_*() counterparts. Remove them, and update any callers to use
the regular APIs instead.
Change-Id: Ibe6e9cced521b93061e89690ab817ceafe49a469
CRs-Fixed: 2408267
Delay counters per TID have been implemented for following types:
1. Linux stack to hw enqueue delay
2. HW enqueue delay to tx completion delay
3. TX interframe delay
4. RX interframe delay
5. RX frame delay from ring reap to networking stack
Change-Id: I836596cbd878a43955c18b4981cb5b7b43d4df5e
In handling addba request, if we receive a request
for a tid that is in IN_PROGRESS state, we ignore
this new request.
Change-Id: I71e3f78cf43f25c184161669a359a4b703cab3cd
Crs-fixed: 2408140
Add members in the ops framework and the respective
function definitions for supporting 8021pcos to tid mapping.
Change-Id: Iaa15efbda0824cecb1b2db67ea8b6ee585a8d56c
On low memory platform rx_pkt_header tlv is not subscribed to get a
savings of 128bytes in skb. This is required to reduce the skb size from
4K to 2K on 32-bit platforms. Use HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG
message to unsubscribe rx_pkt_header tlv for rxdma ring.
Change-Id: Ie684f1ca1de9c824a869b4e13fd0ee1d068004e7
CRs-Fixed: 2408424
Do not process RX packet header TLV for low memory config profile.
Also, drop decapped frames in invalid peer processing function.
Change-Id: Ifc7721bb25d85c7e277bebf4b962d2f1bfea150c
CRs-Fixed: 2395508
wifi up/down will cause soc stop and soc
start which will allocate rx desc pool
array memory for each wifi up
This creates memory fragmentation issue
hence reuse Rx descriptor pool array
across wifi up/down and free only nbufs
CRs-Fixed: 2394666
Change-Id: Ic897c733dfba3d8829e2f2f51099cd615b8a7ea2
qdf_nbuf_cat API used to call skb_free
on src address but was later modified
so that the caller of qdf_nbuf_cat is
responsible for freeing the src memory
Due to this change in the API, the
freeing of src memory on caller side
was not taken care and will lead to
mem leak
Hence add qdf_nbuf_free after calling
qdf_nbuf_cat if it returns success.
If qdf_nbuf_cat returns failure, then
freeing is taken care as part of error
handling in parent function.
CRs-Fixed: 2411320
Change-Id: If50eb9279d0cf26a0cf57444cb69e56f11995720
Check for completion status of the ppdu based on
HTT_PPDU_STATS_USR_COMMON_TLV and
HTT_PPDU_STATS_USR_COMPLTN_ACK_BA_STATUS_TLV.
Update the stats only when completion status is ok else
update retry and failed frames count.
Change-Id: Iac7730715f853746d77873488b7886e7beed467d
CRs-Fixed: 2390383
Add support for reset ast entry and table, also send
ast entry type to upper layers in delete callback
Change-Id: I6b420fba5bab50519e8954a1e796b04bc0768ef8
CRs-fixed: 2384550
When IPA using GSI instead of UC different IPA TX and RX
clients needs to be configured. In this change when IPA
uses GSI configure appropriate TX and RX clients/pipes.
Change-Id: I0302323d91f0cc4256a1b08ddbb1345d0daa2939
CRs-Fixed: 2368003
Replenish buffers consumed during monitor packet processing
and map it to the rx_desc_pool associated with a pdev.
Change-Id: Ia844c92c6b61bbb22ae42d38796aad2f29756b5e
CRs-Fixed: 2407502
VOW stats is an extension of regular stats to capture
all drops per TID. Delay counters per TID are also
included.
Change-Id: If6087f37b32cf9ae4bb405190a358ad3c9750dd2
Some of the print messages in HAL module come very excessively.
Use hal_verbose_debug() API to print them.
CRs-fixed: 2405028
Change-Id: I4b4754af65c00edb571de898527026b6183ef15f
Some of the print messages in Data-path module come very excessively.
Use dp_verbose_debug() API to print them.
CRs-fixed: 2376998
Change-Id: Ibaec3751ce3cbe98492c531548e613c7d17db898
In datapath, some of the messages get printed everytime when packet
is received or sent. This situation ends up in excessive logging which
leads to stability issue.
In order to fix the situation, provide knob through INI to control
excessive logging and create new macro for logging the message which
comes under per packet path.
Change-Id: I2af5f9bf39540f952138aa8308401a387fe62bf1
CRs-Fixed: 2376998
It is easy to be misled when unmapping message is traced as map
message. Correct this wrong message.
CRs-Fixed: 2376470
Change-Id: I5577ae8e0f787925452c3ecf91ce0e2ff8a2ae9f
When delete callback is registered for the ast entry return the ast info
even delete in progress is set
Change-Id: I3ff8a6d49560513c6a18153c5bf901f201e5949f
CRs-fixed: 2384550
discard fragmented pkts if msdu count is greater than 1
and also some code clean up
Change-Id: I1d0857b5e22f0e4763cfa355b8c92bde697d7540
CRs-Fixed: 2382353
Add CDP APIs for:
a. To get/set rdk stats context into soc
b. To set rdk stats flag into soc
c. To flush rdk stats
Change-Id: I74e35f5fa244d6d38f46a4f64ebbad8a630589bd
If non QOS is enabled in meta header store it in skb priority.
Issue occurred as meta header is getting over written by ext2 header
when the frame is sent to firmware.
Change-Id: I61f90dbd188b70e8960ec84c86fda9678ab21f7c
CRs-Fixed: 2400370
dp_soc_reinit is a flag to check if the
Rx descriptor memory can be reused across
WiFi up/down
Provide an API which checks the flag and
returns either true or false based on the
value set
CRs-Fixed: 2354186
Change-Id: I8c1afbfe0f743d7c9ab37a42a9ef0c6ac1fbf39c
