In force SCC logic if 6Ghz freq is not allowed on the SAP interface
get the low 5Ghz freq for SBS scenario as we have 2 5Ghz freqs present
in this case.
Change-Id: I0783e5cf2825ee4f10549826b6dd71677976e6c3
CRs-Fixed: 3103876
When STA+SAP concurrency, sta roaming pcl will remove all channels of SAP
band except scc channel to avoid mcc.
When SAP stopped, STA roaming pcl isn't updated for wrong vdev id is used,
so can't roam to all channels of old SAP band except scc channel to avoid
mcc.
Change-Id: I35adb55ac155e4c84f858f16796dbec12589ab2f
CRs-Fixed: 3102601
Currently there is no support to read bmiss stats from fw.
With this change, add support to read bmiss stats from fw.
Change-Id: I77594d05fbcd295aff4c625ba5f4f33cbc491063
CRs-Fixed: 3097304
A MLO with 1 link not active will lead to HW mode as SMM instead
of SBS, so check and see if SBS MLO is present and take
decision as per it.
Change-Id: Ide487d56d6375892b91ab615b9ad314dba2c9991
CRs-Fixed: 3102349
Currently in SAP mode, when host driver receives disconnect for
station, first it gets disconnect stats with serialization command
and then it sends delete peer command to fw. There is an issue with
this approach, if there are maximum number of clients are connected
to a SAP and all of these clients gets disconnected at the same
time, in that case there will be a disconnect stats command and
peer delete command in serialization, because of which serialization
queue gets full.
To address this issue, remove disconnect stats command from
serialization and send this command just before sending peer
delete command once peer delete command gets serialized.
Change-Id: I2fa1a5a393939eebbce796e11348fa7c040b40e8
CRs-Fixed: 3100914
Currently, the ini param "ndi_max_support" is set to 1 in the
ini definition though DUT can support maximum 2 NDIs.
Customers need to set the ini param to 2 in ini file
in order to support two NDIs. This ini param value needs
to be maintained across chipsets and android versions,
which is difficult.
Change the default value to 2 to avoid these. If any customer
needs the value to be 1, the same can be set in customer/target
specific ini files.
Change-Id: Id45147541dba057c2f3420adee43c7a56e3ee72b
CRs-Fixed: 3097045
In dual sta case, while vdev0 roaming, vdev1 tried to connect and
stop vdev0 roam. in lim_process_assoc_rsp_frame,
lim_is_roam_synch_in_progress return false, hdr is parsed as invalid
addr, assert when access hdr->sa.
Change-Id: I917dc064dbca5600fe3586ec08103fa62a1348ee
CRs-Fixed: 3100427
Currently, MAC address update is supported only when interface is down.
Because of this framework needs to issue interface down and interface
up to update the MAC address. Interface down and up will lead to VDEV
delete and VDEV create commands to the FW.
To optimize Host-FW interactions during set MAC address, add support
to update the MAC address without bringing the interface to down state.
Change-Id: I76afa8f8c2504e8271bf689392d526f994afff0a
CRs-Fixed: 3063201
Add RSO state changing log to roam history log
so that help debug roam state change issues.
Change-Id: Ifb11013d83de6ee35241dd796df9a7ccbb1464e7
CRs-Fixed: 3094770
Add ini "disable_mcs13_support" to disable mcs13 to when SAP working
on 80p80MHZ/160MHZ/320MHZ and mcs12_13 supported.
Change-Id: Iff7043cc422cbe00fa771fe5fad9ad992d6deaf5
CRs-Fixed: 3062196
Add support to send qos null frames received from firmware on
STA interface to mon interface based on config value. The config
value get update based on vendor command set by user.
The packet filter check in ucfg_pkt_capture_process_mgmt_tx_data
moved to target_if_mgmt_offload_data_event_handler. So that we
will not allocate any buffer if filter is not set.
Change-Id: I426b340c5a65711ada971062af95ae039d18d0bd
CRs-Fixed: 3076241
As requirement, concurrent mode, station 5G/2G scan need stop when
AP connected by peer station.
Condition:
STA + AP 5G (connected) + AP 2.4G skip 5G scan
STA + AP 5G (connected) skip 5G scan
STA + AP 2.4G (connected && 2.4G only) skip 2.4G scan
Others concurrency skip none
Add API policy_mgr_scan_trim_chnls_for_connected_ap() to check if
need trim scan channel list. Which channel list need be trimmed.
Change-Id: I21da69fad617a6f342b9d902bf5b9d326ee1e11c
CRs-Fixed: 3075065
Fix policy_mgr_current_concurrency_is_scc() and
policy_mgr_current_concurrency_is_mcc() API for
3 port to consider mac_id.
Change-Id: I076e19d85f495d27b940c3cb6b3f3b1383d9b5e9
CRs-Fixed: 3093760
In packet capture mode currently the cck and ofdm flags are
filled by checking phy mode received from FW. But now FW is
sending below rate codes instead of phy mode. So update the
check in host to check rate code and based on rate code fill
cck and ofdm. The proper filling of cck and ofdm will help
Wireshark to derive correct phy type in the packet capture.
WIFI_HW_RATECODE_PREAM_OFDM,
WIFI_HW_RATECODE_PREAM_CCK,
WIFI_HW_RATECODE_PREAM_HT,
WIFI_HW_RATECODE_PREAM_VHT,
WIFI_HW_RATECODE_PREAM_HE,
Change-Id: Ie9b38dd403a0bf39397ff22e80dd24dfa152fdcd
CRs-Fixed: 3079456
In qdf_nbuf_update_radiotap rssi is filled based on flag
DP_MON_RSSI_IN_DBM. When this flag is enabled
qdf_nbuf_update_radiotap is expecting rssi value in dbm.
So fill rssi_comb based on flag DP_MON_RSSI_IN_DBM.
Change-Id: I9a6542cc27a5e19072e89ae78ff05f4392c64157
CRs-Fixed: 3083133
Add support for QCA_WLAN_TWT_SET_PARAM command to configure
QCA_WLAN_VENDOR_ATTR_TWT_SET_PARAM_AP_AC_VALUE attribute.
This attribute provides access category value for
WMI_PDEV_PARAM_TWT_AC_CONFIG. This is used by firmware to
configure access category for TWT HW queue in TWT Responder
mode(SAP).
Change-Id: I06a14d099c516767fe57ba94acc2a5fb95dc4e17
CRs-Fixed: 3052909
Besides MLO, legacy mode 6G SAP + 5G(2G) SAP are going to support RNR
IE. Move RNR related flag from MLO to private mlme component.
Remove mlo_rnr_updated in struct mlo_link_ie_info.
Add notify_co_located_ap_upt_rnr and related API in mlme_legacy_priv.
Change-Id: Ife86d1ed2fe8b633f6167750053b2aff37911299
CRs-Fixed: 3092483
Handle SAP + MLO_STA concurrency after MLO connect, by disabling
one of the SBS link if 2.4Ghz SAP is present.
Also if roam happen to non SBS MLO remove the disable restriction
of MLO.
Change-Id: I7d9503a01bb23cd06808b46c090f0dee39c96af6
CRs-Fixed: 3096310
To support 4 SAP concurrency on sdxlemur, they must work with mode
SAP+SAP(2g/SCC) & SAP+SAP(5g/SCC) or SAP+SAP(2g/SCC) & SAP+SAP(6g/SCC).
Add separate fourth_connection_pcl_dbs_table for mobile route devices,
adding 4 SAP cases, and modify policy manager to get pcl index when 4th
SAP being started.
Change-Id: I919fa6fa0bbacbe1be0d22ed2ffc9e322b6343e9
CRs-Fixed: 3092568
Release vdev ref count if roam sync event is not handled
in connecting or disconnecting in cm_fw_roam_sync_req.
Change-Id: I2575116dc4ed6a4e3ae31dac2c80191d420eaf3e
CRs-Fixed: 3092988
Handle SAP and MLO STA concurrency such as:
1) If MLO STA is present with both links
in 5/6 Ghz then SAP comes up on 2.4 Ghz,
then Disable one of the links.
2) If there is channel switch for sap from
2.4 ghz to 5 ghz, then enable both the
links as they were disabled by previous
operations when sap was on 2.4 ghz.
3) If MLO STA is present with both links in
5/6 Ghz and SAP, which was present on
2.4 ghz, stops then renable both the as
one of the links were disabled because
of sap on 2.4 ghz.
Also, in case where MLO STA roamed from
5 + 6 link to 2.4 + 5/6 link force scc
will happen and the disabled link has
to be enabled.
Both links should only be enabled if mlo
sta has more than one links.
Change-Id: I0fd0093b20336ae32325981589c399b44a44b64e
CRs-Fixed: 3092202
Optimize excessive SBS prints in policy_mgr_are_sbs_chan and
policy_mgr_is_cur_freq_range_sbs.
Change-Id: I379f3b1b050e08f6d76a7e657067ae66fe45c93c
CRs-Fixed: 3094259
Handle MLO STA + Legacy STA concurrencies such that:
1) Don't disable any link if STA form SCC with any of the
link.
2) Disable the link on the same MAC which can cause MCC.
a) On non-SBS devices disable the ML link on the same
band as STA, As the same band means the same MAC
in non-SBS mode.
b) On SBS devices, disable the ML link on the same MAC:
- If STA freq is 2.4Ghz disable the 2.4Ghz link.
If a 2.4Ghz link is not present, disable any of the
5/6Ghz links (FW to decide the link depending on
SBS mode, low share or high share).
- If STA freq is 5Ghz and can lead to SBS with on of
the link, disable the non-SBS link (link which will
remain on the same MAC).
- If STA freq is 5Ghz and cannot lead to SBS with
one of the links, disable the link on the same MAC/
band.
e.g:
STA freq: STA ML combo: NON SBS Action: SBS Action:
------------------------------------------------------------------
2Ghz 2Ghz+5/6Ghz Disable 2Ghz Disable 2Ghz
5Ghz 2Ghz+5/6Ghz Disable 5Ghz Disable 2.4Ghz
if both 5Ghz lead
to SBS, else
disable 5Ghz
5Ghz(lower) 5Ghz+6Ghz Disable 5Ghz Disable 5Ghz
5Ghz(higher) 5Ghz+6Ghz Disable 5Ghz Disable 6Ghz
2Ghz 5Ghz+6Ghz Disable Any Disable Any
Change-Id: Ie8ca51b5e108c1cfce1a02fc97f4849c617216b7
CRs-Fixed: 3090333
Fix filling of the SBS range, in current freq range.
And Add is current mode SBS in required APIs.
Change-Id: Ief334aa236ad18512ac5d8cf80b3a2d13d77529a
CRs-Fixed: 3093159
Currently the global vdev gp_pkt_capture_vdev used in packet capture
does not have ref count.
Add ref count for global vdev used in packet capture component.
Change-Id: I1cc619b31c81a77af0842ce219cfcc96060626a0
CRs-Fixed: 3049225
Currently for 6GHz, nan is allowed on LPI channels as well,
nan should be allowed only on VLP channels.
With this change allow nan only on VLP channels.
CRs-Fixed: 3072585
Change-Id: Ic8cd8a5ca5c096530762cc0f9d199cef30155838
Dump SBS range while checking for SBS mode in
policy_mgr_are_3_freq_on_same_mac and
policy_mgr_are_2_freq_on_same_mac
Change-Id: Ic8e6a49d60dcc82746a2b3e392576399dd1ad417
CRs-Fixed: 3092338
policy_mgr_dump_sbs_freq_range is flooding the logs with
SBS range, instead print it once when we check for
SCC channel.
Change-Id: I60e17f6fed3d0973f29d5225458a392021e482f7
CRs-Fixed: 3091231
When roaming has started and connect request from userspace
is received, disconnect is initiated as part of the connect
request and RSO stop->RSO Deinit is sent to firmware. But
before receiving the RSO stop, firmware posted the Roam Synch
indication to the host driver. While droping the roam
synch indication, the driver does abort roaming and as part of
that RSO state is changed to RSO enabled in connecting state.
Change the RSO state to RSO enabled only if roaming or roam synch
indication processing is in progress.
Change-Id: I7869d1a559884480708b9d1a493296a443364f0b
CRs-Fixed: 3089165
The [-Werror,-Wformat] compiler option is enabled,
Format specifies type does not match the argument
type.
Fix the compiler errors that format specifies type
does not match the argument type.
Change-Id: I66c4834693c41217f1263e8d23e9e291f7045c55
CRs-Fixed: 3089460
Add INI - mgmt_frame_hw_tx_retry_count to configure MGMT
frame HW tx retry count for certain frame types.
The INI String format:
frame_hw_tx_retry_count="<frame type>,<retry count>,..."
The supported frame types are defined by enum mlme_cfg_frame_type.
Retry count max value is 127.
For example:
mgmt_frame_hw_tx_retry_count="0,64,2,32"
The above input string means:
For p2p go negotiation request fame, hw retry count 64
For p2p provision discovery request, hw retry count 32
Change-Id: I32f6c7d83ede9b28484c7a0b29824bde32e06422
CRs-Fixed: 3082532
Currently, the host does not check STA+STA concurrency
before sending VDEV/PDEV level PCL command to FW.
1. In case of STA Standalone connection, Host should send
PDEV level PCL commands to FW and marks all channels in PCL
as allowed.
2. In the case of STA + STA connection in MCC/SCC, Host
should send PDEV level PCL command for primary vdev id and
mark all channels in PCL as allowed.
3. In case of STA + STA connection in DBS, Host should
send VDEV level PCL command for both vdev id and via PCL
list host should make sure band is restricted to maintain
only DBS.
4. Initially STA + STA connection in DBS and then one STA
got disconnected. In this case, After disconnection Host
should send PDEV level PCL command for connected vdev id
and mark all channels in PCL as allowed.
Change-Id: I59cf5dfd1bf8fb26e360a8b0b5456fe05037376a
CRs-Fixed: 3084156
ssid_allowed_list is cleared for each RSO stop.
To fix it, only clear ssid_allowed_list when disconnect, don't clear
it for each RSO stop.
Change-Id: I577191295d388ab92440d7bf65b6a0da6c342181
CRs-Fixed: 3087296
If MLO STA is present, allow further STA connections to all
available bands/channels irrespective of existing STA
connection band.
Change-Id: Ic7da10b2e74645b73c579b38f43bb7e3105b6f55
CRs-Fixed: 3088656
Support to deliver SMPS, OPMODE to user app, and
deliver RRM report to son module.
Change-Id: I9e12043e59878c5e46d24f02717356ad40d7e35d
CRs-Fixed: 3056538
Use wlan_get_vendor_ie_ptr_from_oui() instead of
wlan_get_ext_ie_ptr_from_ext_id() to parse vendor specific
WFA Hotspot-2.0 IE
Change-Id: Ie9ee6c1f16d0eb83f52b7d9afa97f362f8400ff3
CRs-Fixed: 3080931
When connect from wpa_supplicant and roam from F/W happens at same
time, supplicant hold cm cm_req_lock and wait rsp from scheduler
thread, sheduler thread is blocked to wait for cm_req_lock.
Change-Id: I6b9010972d29be9a32d3b85ee72891ed62b50801
CRs-Fixed: 3087169
During SAE roam auth offload, update the beacon/probe response
frame coming from the FW via WMI_ROAM_FRAME_EVENTID into the
scan db.
When the bss info of the preauth candidate is unavailable in
the host/kernel scan entry, supplicant fails to determine the
proper SAE PWE config of the peer and the commit request fails.
Change-Id: Ia782ece7bebf8274f949fe9fb3b2a2882bf47597
CRs-Fixed: 3075458
Currently, in TWT setup command, if peer does not support TWT
capabilities then firmware returns status = 4.
Add condition to check the peer capabilities before sends TWT
setup request to firmware.
Change-Id: Icd1cbeff2db2bdec4e456013e98270a526ff22ce
CRs-Fixed: 3082071
Currently, NDP peer multicast address is derived from peer MAC address
and cached in the host. While removing the NDP peer, peer MAC address
is used to search the cached multicast address list. Because of this,
peer multicast address list is not getting freed.
To resolve this, derive peer multicast address from the peer MAC address
while clearing the cached multicast address list.
Since MAX NDP sessions are 8, allocate memory for peer multicast address
list during the NAN vdev private object allocation. This avoids the
special handling for peer multicast list in multiple error scenarios.
Change-Id: Ifbf890a4b9c8be54d84a5b57ed8f6c237ecd51ca
CRs-Fixed: 3085069
Currently memory allocated for structure roam_pmkid_req_event
is freed in two places causing usage after free.
Fix is to free memory only once in
target_if_pmkid_request_event_handler api.
Change-Id: Idc70e8437f89cb1cf4f6d35f924085409994714a
CRs-Fixed: 3064667
To support QCN7605 DBS chip, which has 3 RF chains, chain0 is for 2G,
chain1 is for 2G/5G, and chain2 for 5G. So it need 3 bits to
indicate RF chainmask for DBS mode. This is to extend the value
range for 2g/5g chainmask setting for QCN7605 DBS mode.
Change-Id: I43ee3393c121b6e9609223af1db0059158d44078
CRs-Fixed: 2933722
Currently in packet capture component the tx and rx ops are
stored in vdev but the ops should be only per psoc and
the ops will be registered only once per psoc. So change
tx and rx ops from vdev specific to psoc level.
Change-Id: I09e9dd5d83e7b10c86e80ebf2584469071060813
CRs-Fixed: 3049207
In HW mode transition event for mac_freq_mapping,
fw sends pdev id for identifying mac in following
format:
WMI_PDEV_ID_1ST 1 /* first pdev (pdev 0) */
WMI_PDEV_ID_2ND 2 /* second pdev (pdev 1) */
WMI_PDEV_ID_3RD 3 /* third pdev (pdev 2) */
Covert these PDEV_ID to the ones used in policy manager
used for filling current mac frequencies
Change-Id: I745de0278b1ddf627062163364b684745df5e4e7
CRs-Fixed: 3083289
