Send Vdev pcl command on both connected STA vdev when sta+sta
roaming is enabled. Handle below cases:
1. When 1st STA is connected send PDEV pcl command for the
first sta. Set pcl_vdev_cmd_active false.
2. When 2nd STA comes up, Set pcl_vdev_cmd_active to true,
send vdev PCL for 1st sta before enabling roaming(disabled
as part of the connect on 2nd STA).
3. For second STA force dbs connection when
enable_dual_sta_roam_offload ini is enabled. Set the channels
of the 1st connected STA band as invalid and remove these
channels from the scan filter.
4. On disconnection of 2nd STA connection, clear the vdev
PCL sent for 1st STA and then send PDEV pcl command.
Also make changes to send set PCL command after roam init
is done before RSO start is done at firmware to avoid assert.
Post set pcl command from sme/csr through lim/wma/wmi to avoid
the above condition.
Disable roaming on the vdev before sending set PCL command to
avoid roaming on undesirable band & channels.
Change-Id: I6bd869015b7248fe5c5c90b6e2fa0174995be197
CRs-Fixed: 2725360
Enable compilation of the connection manager roam files with
Kbuild changes.
Add new API to store and retrieve the firmware scan channels at
mlme. Also add initial support to post SET_PCL command through
lim, so that it is not sent before ROAM init command.
Add changes to restrict connection of the 2nd STA to
channels on the other band of the 1st STA connected band.
This is done by filling only the allowed band channels in
the scan filters for the 2nd STA connection. If only
1 STA is active, it is allowed to connect on any band.
Add header gaurds for missed header files:
wlan_cm_tgt_if_tx_api.h
target_if_cm_roam_offload.h
Change-Id: Id2bce12b9663ed635ea46164169b088461aab870
CRs-Fixed: 2720341
Currently, driver sends NAN enable/disable request to firmware
and waits for the response. NAN state is cleaned up when NAN
disable indication is received. But if firmware doesn't respond to
NAN enable or disable request, a timeout happens and NAN state is
not cleaned up.
Cleanup the NAN state upon timeout for NAN enable/disable request.
Change-Id: Iadfff2b4d010407f04b529ff81b1ce1f11064695
CRs-Fixed: 2723094
Update default value for gFwDebugModuleLoglevel to get more logs
to debug firmware issues.
Change-Id: I388f7af62b00b6af5d963e2c6f2dec90389cca18
CRs-Fixed: 2722193
Add new connection manager API to send vdev pcl command for
sta + sta roaming per vdev. For vdev pcl command, the weight of
the 1st sta connected band will be set to 0.
Add connection manager roam API files for TX ops,
connection manager target if wrapper to send the vdev
pcl command to wmi. Introduce new API to get dual sta
roaming support and save it in cm roam public struct.
Change-Id: I56a7475b0b9865e969917ec05a117f206f198111
CRs-Fixed: 2712346
Recent changes to hdd_regulatory_dyn_cbk broke WWAN n79 and
WIFI 5 GHz co-existence, failure:
1. AGO won't switch channel to 2G even 5G channel disabled.
2. SAP can switch to 2G if 5G disabled, but won't restore back
to 5G when 5G re-enable.
Update callback to call the proper function so that band for
SAP or P2P GO is updated accordingly.
Change-Id: I4087466c9a05250921159d5daff077a8ea7ea495
CRs-fixed: 2718339
There are different version of SSID structure used in driver, replace
them with struct wlan_ssid.
Change-Id: I8a5bfdafbdc4365afccc11980633272be9c75a81
CRs-Fixed: 2721873
Currently, NULL pointer dereferencing of objmgr PDEV
is observed in wlan_objmgr_pdev_get_comp_private_obj.
Add NULL check for pdev inside ipa_uc_force_pipe_shutdown
and ipa_fw_rejuvenate_send_msg before pass PDEV to
wlan_objmgr_pdev_get_comp_private_obj.
Change-Id: I4e19cc9c254febabad551aa62f72d2ce4897b852
CRs-Fixed: 2719149
Currently, powersave configuration is being overwritten before INIs
are initialized by mlme component. As a result INI configuration is
not being overwritten in case of monitor mode.
To resolve this issue, overwrite PS configuration during start
modules and restore it in stop modules.
Change-Id: I2707b431b81881c943104b211d55c6f48f348ba9
CRs-Fixed: 2682164
Host retransmits WPA3 SAE authentication frames after 1 second
if there is no response for previous auth frames from AP.
Host keep retransmitting SAE auth frames for max WLAN_SAE_AUTH_RETRY
times.
Change-Id: I1be0bd5354586518781876646b063592e667b0bb
CRs-Fixed: 2716719
In 11ax draft 6.1, the 6G starting frequency has been shifted by 10 MHz
to the right. Change the default channel value of INI "normalize_acs_weight"
accordingly.
Change-Id: I6b08f3c604f4410dbddf25bbe7c7491047b676ea
CRs-Fixed: 2695542
Add new ini enable_dual_sta_roam_offload to enable/disable dual
sta romaing feature. Enabling this ini will allow firmware to
roam on both the vdev if firmware supports dual sta roaming and
the hw is dbs capable.
This ini will be checked in the dual sta roaming offload state
machine to enable roaming on both the STA or to fallback to the
current implementation where first connected sta will have rso
enabled.
Change-Id: I04f141ac31e0f168b6f19fe878bca219a36cfae7
CRs-Fixed: 2709036
Currently the driver allows standalone SAP and
STA+SAP SCC even if the dfs master mode is 0
and the ini g_sta_sap_scc_on_dfs_chan if
configured 2 assumes that the dfs master mode is
enabled.
If the user configures master mode as 0 then the
ini g_sta_sap_scc_on_dfs_chan should not be 2
since standlaone SAP can come up on DFS channel
according to the implementation.
Fix is to overide the value of g_sta_sap_scc_on_dfs_chan
to zero if the master mode is disabled.
Change-Id: Ife02a3545a5df7dfa7855feea7965628a1f513a3
CRs-Fixed: 2713392
Concurrency related changes for single MAC target which
doesn't support Inter-Band MCC as well.
Change-Id: Id9d02d6353103f21dee8b9e6767d2fc8b1277278
CRs-Fixed: 2711462
For SAP mode, FW doesn't support tx action on different band, and
shouldn't send on DFS channel. So drop action frames for SAP mode.
Change-Id: I2015957346824787d0d902b2d21746d10e2cc9c0
CRs-Fixed: 2718417
Reproduce steps:
1. SAP+SAP SCC on channel 36
2. Set band to disable 5G band
Observed Results:
Only 1 SAP switched to 2G channel 6, another keeps in channel
36.
When wlan_hdd_get_channel_for_sap_restart for 1st SAP return
success, will break from loop, so 2nd SAP won't CSA at all.
Expected Results:
Both SAP need switch to 2G by CSA.
Change-Id: I67807fb77bfc5a33011576d577b734b038637075
CRs-Fixed: 2718664
New table for 2-port as well as 3-port concurrency combinations
when both DBS and Inter-Band MCC are not supported by target.
Change-Id: Ic43c46cb60f4baa0399373e96078276198509b49
CRs-Fixed: 2711500
Move STA specific wmi functions from qca-wifi-host-cmn to
qcacld-3.0 under components/wmi. Below is the wmi source tree
qcacld-3.0 \
- components \
-wmi \
src\
inc\
wmi_tlv_attach() will call the STA specific attach functions
defined in wmi_unified_priv.h.
Change-Id: Ia99e12d79500add94791db4447e1f6dbf44c99af
CRs-Fixed: 2714589
Currently the driver supports the dynamic
configuration of nss and chain to FW for
VDEV if the FW advertises the capability
of supporting the same. However there is
no support to overide this.
Fix is to have an ini to enable/disable
this feature of configuring the dynamic
nss and chains to FW.
Change-Id: I0b84bb5aec53966a43a00c11d4aba3863414005c
CRs-Fixed: 2708303
Validate vdev and make sure its not null before try to get vdev ref
during runtime pm suspend/resume path.
Change-Id: Ieb9cb26703727edbc302447453000e1d33717343
CRs-Fixed: 2715161
Currently, if the time spent in a spin_lock region exceeds
a certain threshold, a system crash will be triggered.
There are chances that a log within a spin_lock region would
result in a crash if the time taken to log the buffer exceeds
the threshold which triggers the crash.
Avoid this by moving the log out of the lock region.
Change-Id: Ic51556723033e9553443250b9cb4cfee2b402309
CRs-Fixed: 2713234
Release lock when psoc_mc_stats is NULL in
ucfg_mc_cp_stats_inc_wake_lock_stats API.
Change-Id: Ibf316d848b2e1d0a4189eb4cebac27922ce30dcd
CRs-Fixed: 2702093
Update multicast and broadcast rx packet count on
receiving wmi update stats event from firmware by
fetching the peer stats from DP layer.
Change-Id: I0befdbe952aa4e773bbe072affaf698819b3a80f
CRs-Fixed: 2709871
Add check in policy_mgr_dump_channel_list to restrict the
pcl_channels array index to NUM_CHANNELS & len while printing
2G/5G and 6G channel list as pcl_channels is initialized
with size of NUM_CHANNELS.
Change-Id: I5ca573d1c12970974cbb09c5d25f816e2d6c1de5
CRs-Fixed: 2706882
vdev object is used without get ref in runtime pm enable/disable offloads
api, this can lead to vdev use after free issue. Add vdev ref get before
using it and avoid vdev use after free.
Change-Id: I309abdd568c858288150f575899101bda06e57a7
CRs-Fixed: 2710759
In the beacon, ESS report element gives the information of a BSS
that station learns and uses for roaming. Hence enable BIT(16)
ROAM_TRIGGER_REASON_ESS_RSSI of "roam_triggers" INI.
Change-Id: I47f35c3fad640054a54ccb3874475a1c59b51489
CRs-Fixed: 2688522
Currently, NAN discovery interface(wifi-aware0) is created if both
host and firmware support NAN separate vdev feature. But NAN
feature capability(gEnableNanSupport) is the master of these
capabilities. Don't create wifi-aware0 if gEnableNanSupport is
disabled.
Also, don't allow NAN iface creation for the kernels less
than 4.14 as NAN interface is allowed by kernel only from 4.14.
Change-Id: Iaf10974c373b2a77d2c24a78540910f78a3dc768
CRs-Fixed: 2706997
Change the prior conditions required for configuring Rx Chainmask &
Tx Chainmask.
Below conditions should be met for setting chainmask:
1. Antenna sharing should be disabled.
2. If gEnable2x2 is 1 then enableBTChainSeparation must be 1
else gEnable2x2 should be 0.
3. DBS should be disabled (gDualMacFeatureDisable = 1)
or HW should be DBS 2x2 capable
4. set TX/RX chainmask 3 in ini (gSetTxChainmask1x1/gSetRxChainmask1x1)
5. HW should support TX/RX chainmask as 3
Change-Id: If83c55af47abb591cdf1b5d2e3981d80bc305bf2
CRs-Fixed: 2705520
Introduce INI "ndi_max_support" to configure max number of ndi
interfaces host supports. Host configures max number of ndi
interfaces support in firmware using WMI_INIT_CMD.
Change-Id: I287b9f96b98103e67cf35d0c02488a28af731044
CRs-Fixed: 2701557
Add connect id in the policy manager for the newly designed
connection manager infrastructure.
Change-Id: Ib7bd08e5326ead04da88175636777bf5dd4e255b
CRs-FIxed: 2705700
Introduce INI "ndp_max_sessions" to configure max number of ndp
sessions host supports. Firmware advertises max number of ndp
sessions supported in wmi_service_ready_ext2 event. If the firmware
advertises non-zero value of max ndp sessions then host configures
max ndp sessions support in firmware using WMI_INIT_CMD.
Host uses a minimum of "ndp_max_sessions" value and firmware
advertised max ndp session value to configure max number of ndp
sessions in firmware.
Change-Id: I613815f384f9b0a61711324c85ecfa095d133360
CRs-Fixed: 2673120
Update the HDD callback to check for phymode change or
channel change when country code updates and stop/restart
the adapter accordingly. Include cases for STA mode,
SAP mode, P2P-CLI mode, and P2P-GO mode.
Add conditional compilation flag for MCC specific API in
qcacmn.
Change-Id: I88edb401146e3cef48d757393f89fa48cb6ac895
CRs-fixed: 2658294
When config chanlist with DFS channel only, SAP can't be started
due to all DFS channel are all excluded and can't find available
channel in current chanlist. Issue is introduced by
'Change-Id: I53a22a0059d56aa8fca66215fed1ed0588db7db5'.
Fix is to set default ini np_chan_weight value to 1, then DFS channel
will be most likely put at last in available chanlist and DFS channel
will be the last choice when no other normal channel can be used.
If config chanlist with DFS channels only, SAP still can be started
on DFS channel successfully.
Change-Id: I04f70068069ff5c4f68b7d7fa56a2ede40035c6e
CRs-Fixed: 2694415
hdd_get_connected_station_info ignores some peer txrx
statistics if gSapGetPeerInfo is not set.
Change-Id: I02e607c081a932601c9c84998f5e9ede3563110e
CRs-Fixed: 2691717
Update return type of nan_discovery_flush_callback to return
QDF_STATUS to match scheduler_msg_process_fn_t.
Change-Id: I3a2c32beaff471ed3a2e8e3956292257e074cd50
CRs-fixed: 2698305
In pmo_core_psoc_bus_runtime_suspend, when handing pm suspend fail,
Don't call qdf_bug if fw is already down.
Change-Id: I4be872a27bbc100e85432e42a33ac329fad1dd24
CRs-Fixed: 2694416
Introduce an INI "oce_subnet_id_weightage" to indicate firmware
about oce subnet id weightage so that firmware can use subnet id
weightage to calculate candidate AP's score.
Change-Id: Iaf3be1947f8966a2e2c34162d251a31950058231
CRs-Fixed: 2674596
Update return type of target_if_nan_event_flush_cb to return
QDF_STATUS to match scheduler_msg_process_fn_t.
Change-Id: I2f0380edeb21a1c6016358725abab39fdc741466
CRs-fixed: 2698302
Set WLAN_IPA_MAX_STA_COUNT to WLAN_MAX_CLIENTS_ALLOWED
if WLAN_MAX_CLIENTS_ALLOWED is defined.
Change-Id: Ic7b3706897cec8ee149bab12cd91c94ae04f75ef
CRs-Fixed: 2658585
Implemented driver interface for NL command for setting
and getting TX and RX chains. The chains can be set to
either chain 0(1) or chain 1(2) or both(3). This is only valid if
antenna mode is set to 2X2.
Below command can be used to set the chainmask:
iw phy <phyname> set antenna <bitmap> | all | <tx bitmap> <rx bitmap>
Example:
iw phy0 set antenna 1 -- to set both Tx and Rx chain 0.
iw phy0 set antenna all -- to set all/both chains for rx/tx
iw phy0 set antenna 1 2 -- to set chain 0 for tx and chain 1 for rx
Below command can be used to get the chainmask after set:
iw phy <phyname> info
check for "Configured Antennas: TX 0x1 RX 0x1"
Below conditions should be met for setting chainmask:
1. Antenna sharing should be disabled.
2. gEnable2x2 in ini file should be 0
3. enableBTChainSeparation in ini file should be 1
4. DBS should be disabled (gDualMacFeatureDisable = 1)
or HW should be DBS 2x2 capable
5. set TX/RX chainmask 3 in ini (gSetTxChainmask1x1/gSetRxChainmask1x1)
6. HW should support TX/RX chainmask as 3
Change-Id: I04f6667398eac405a6be61bc039e048090578abf
CRs-Fixed: 2693370
Enable band preference for 6ghz and give default
max weightage to 6ghz to push it for STA operation.
Change-Id: I2fb1d68bb0d8535b4e9813fdd1551723a1fe4f56
CRs-Fixed: 2688585
Remove wowlan_deauth_enable and wowlan_disassoc_enable INI params as
these are unused
Change-Id: I90d10995365771359f1bcd029b9193437ad67a18
CRs-Fixed: 2678156
