Move the function attribute to common file so that the
parsing issue due to unreferenced tcl_data_cmd can be
fixed on other targets also.
Change-Id: I40a7196926061e8d232f0f070c0ed045dafd97e2
CRs-Fixed: 3228562
This is requirement change about correcting the registers when
populate CFR elements from tlv.
Change-Id: I424a0d3ae569dae3378137b84067a30b0fa28413
CRs-Fixed: 3218220
Host failed to read some of cfr elements by HAL_RX_GET for kiwi since
their LSB is big then 32 and ready 4 bytes isn't enough. This change
reads 8 bytes and then gets cfr elements properly.
Change-Id: I7715ae7c713e2b8e15ec19a191be2f770e2971a6
CRs-Fixed: 3218274
With restructuring in HIF runtime PM module, modules are
required to register with the HIF runtime PM module. Also,
changes are done in functions of allowing and preventing
runtime PM suspend as part of restructuring.
This change registers DP, HTC and HAL internal modules
with runtime PM module and update HIF runtime PM function
calls with the restructured code of HIF runtime PM module.
Change-Id: I8899a1d3b92a90a05c5eaf4df7609f4008f739f8
CRs-Fixed: 3169372
Direct DMA source ring type has two rings where ring0 is
used for Spectral and ring1 is used for CFR. The current
hal_srng_ring_id do not have the ring_id defined for CFR,
which leads to wrong ring_id populated for TX MON feature,
which collides with CFR ring.
Fix the same by defining ring_id for CFR.
CRs-Fixed: 3220401
Change-Id: I778cea533a1907ae6cd94f63734ca6c967891b9d
Incorrect value of macro QDF_MON_STATUS_USIG_MU_VALIDATE2_SHIFT
leads to non-zero value of field "Punctured Channel Info" in
USIG TLV in radiotap header even if puncturing is not enabled.
Correct the value of macro QDF_MON_STATUS_USIG_MU_VALIDATE2_SHIFT to 14.
Also use correct set of macros for setting of usig_mask.
Change-Id: I4a5594f784137238ee4aa072c7595e83673c1960
CRs-Fixed: 3218536
Use CONFIG_SAWF macro to prevent linking dp_set_delta_tsf in
low memory profile.
Change-Id: I07b75f893e6d043839225d9b7288823b6ef2f823
CRs-Fixed: 3211426
For QCN9224 target, All the MIC failures are reported
as decrypt error from FW.
So, added changes to handle MIC failures for QCN9224
target .
Change-Id: I32e616e01e3cd6e76ef105d73fd8a87ce2c81cb9
CRs-Fixed: 3192749
WIFIRX_STATUS_BUFFER_DONE_E tlv indicates the dma
to monitor status ring is complete. Currently this
tlv is unhandled and the logs are flooded with error
message for this TLV being unhandled.
Handle the status buffer done tlv to remove the
unnecssary logging onto the console.
Change-Id: Ie1ac6adf46092ba7bff3ee4a3262fc98c8a6eb3d
CRs-Fixed: 3208659
Add support to move FISA FST from DDR to CMEM, enable it for Kiwi
Adding CMEM support for FISA FST includes
1) Reserving CMEM memory space FISA FST
2) Add HAL macros for CMEM flow search entry
Change-Id: I45fc91a86c1ac89d3d95b246e26ea981314425a8
CRs-Fixed: 3199250
Define a new function to calculate HW delay so that same logic
can be used to calculate delay by other modules.
Change-Id: Id3740bcaa2cd558b89ab02d8e88d5947eb5997b1
CRs-Fixed: 3198305
The original BA window size given from CP might > max DP supported,
add sanity check based on HAL target allowed.
Change-Id: Ibadaddeffe65165a89d580d8a5cbf5f7c724c809
CRs-Fixed: 3193852
In beryllium DP, htt_tx_wbm_completion_v3 is used in which
20B are used by host and only 16B is assigned to the htt tx
status.
To fix this, increase the macro HAL_TX_COMP_HTT_STATUS_LEN
to 20 bytes.
Change-Id: I973ba1f8118488089cd6d6baac7fd589886c2164
CRs-Fixed: 3199031
For reo_cmd ring, in current implementation, we call hal_srng_access_end
in case a descriptor is not available before baling out. This may cause
a write to the shadow register for the reo_cmd ring. In case we are in
the middle of WOW, this can be problematic.
Modify existing implementation to use hal_srng_access_end_reap, which
will not schedule a write to the register and simply return.
Change-Id: Ifb83d904e39b3d749522cd246a5ab3fe51a3104e
CRs-Fixed: 3194289
Shadow config v2 can support max of 36 shadow
registers only. For KIWI target, there are 40
shadow registers supported.
Hence add support to send shadow config v3
for KIWI.
Change-Id: If57e6597397da3e239f25a6c0cc24f8fd37dcdf1
CRs-Fixed: 3167758
Add fix for tx monitor double free and other minor fixes like updating
channel frequency and channel number if it wasn't fetched properly,
fetch protection address only if it is valid.
Change-Id: I184e08080a47b903176b9df0a192f0b5eb0b2750
CRs-Fixed: 3184727
In ring WRAP around case invalidate the descriptors which
are being reaped
Also use no_dsb invalidate API for invalidate descriptors
Change-Id: Iafa844c81a8364af31520ce5fa3e030073e7c706
CRs-Fixed: 3198373
For MU_MIMO traffic from AP to STA, RSSI Legacy TLV gives
reception type as QDF_RECEPTION_TYPE_ULOFMDA which is incorrect.
In order to fix this, update reception type from PPDU Start User
Info TLV. Also remove updation of reception type from LSIG TLVs
to avoid override of reception type value.
Change-Id: I9ef4c5bc7a15d4e68404d702bec61eca9c9bad4c
CRs-Fixed: 3178085
Flush and invalidation of descriptor memory at allocation is helping
to avoid NULL descriptors issues in TX and RX path.
Change-Id: Ifcdb65df01365e7ec0b0be59d8b4bf862d90943d
CRs-Fixed: 3180696
Monitor 2.0 uses a msdu_queue (75K memory), which
is currently enabled for monitor_1.0 as well.
Add this memory under Monitor_2.0 feature, so that
there is no memory increase for monitor_1.0.
Change-Id: If0f3701787585ec2b2efde018287101919a77570
CRs-Fixed: 3176254
a. For decapped frames, convert frames from 802.3 t 802.11
b. for non-decapped frames no conversion is needed
c. Apply radiotap header and deliver MPDU to osif layer
CRs-Fixed: 3074441
Change-Id: Ia03b4bad35d69aa292958782cd424f3df56dabbc
To program Vlan-pcp to TID mapping in hw
register, tid no is passed in place of
pcp value to the hal-layer.Fix this by passing
the pcp value correctly to the hal API.
Change-Id: Ib3bdeffc8dbaa7c5f47406316178206b2eec2c18
CRs-Fixed: 3172024
Populate punctured pattern from WIFIPHYRX_COMMON_USER_INFO_E
And get puncture type from puncture pattern.
Change-Id: I3a5ba4c7c478d15cf3c3cfdcfd0573775ae342ca
CRs-Fixed: 3166010
1. Since peer id is reused for reconnection in MLO case,
old entries for queue desc addr is cleared. Clear the reo
internal storage and reset it back on client connection.
2. Send Qref feature WMI cmd to FW to enable the feature.
Change-Id: I6705ce121c8c25d9a2ace039dab21312fa5ea4b1
CRs-Fixed: 3156642
When a packet s destined to ML STA from a legacy peer, use
the ML peer id to identify the primary link and redirect the
packet to primary vdev for Intra-BSS.
Change-Id: Id8e6fcc9e2dd638e6d923eef50f55325fa538c49
CRs-Fixed: 3169484
The maximum WBM2SW rings in whunt for MSL is 5 and
the same could be 4 in wlan code which will result
in wcov failure for MSL. Use a maximum of 5 WBM2SW
rings for HSP based on FW_SIM config flag to address
this failure.
Change-Id: I16770566710efeeea7acbb51f6710e7a996b5cac
CRs-Fixed: 3167050
Add support for tx monitor flush/drop/truncated handling
and few minor fixes from txmon
CRs-Fixed: 3158502
Change-Id: Ic13476984cd591a381941cfa1501307e9cca2b5a
Even if HW cookie conversion is enabled on KIWI, there is some
case HW cookie conversion might not be done by HW, check the cookie
conversion done bit and get Phy Address accordingly.
Change-Id: I4ee7ed9776086812774637f07da1e4504898c3c4
CRs-Fixed: 3153433
Kiwi target does not used TX status ring.
Hence disable the tx status ring for Kiwi.
Change-Id: If3a39a0017a884bee2320188621b1f05e0c6d568
CRs-Fixed: 3150815
