Currently, wmi_vdev_disconnect_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I2486cc3f63c4b35305b60ac55cd0a622c7185323
CRs-Fixed: 2990373
Currently, wmi_roam_blacklist_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I41d2ef6c228acd8f86f24107c02d11f1a8ac6dea
CRs-Fixed: 2990369
Currently, wmi_roam_event_id data is extracted and processing is
also done in wma. This is not inline with component model where
target_if takes care of data extraction and handover the extracted
data to corresponding component(connection mgr in this case).
Add changes to support the same. As the legacy CSR/LIM is not
yet converged, have a wrapper from connection mgr to wma to call
these legacy APIs.
Change-Id: I0e22bbccfe21200b90771a01f9ee7454f4ecb119
CRs-Fixed: 2990355
Add support to enable the "FT over DS" via
QCA_WLAN_VENDOR_ATTR_CONFIG_FT_OVER_DS vendor config
command.
This configuration helps the firmware to support
“FT over DS” instead of “FT over Air”
Change-Id: I493bf15f83bc39135aaeefa9d8ef328f0fc0cda3
CRs-Fixed: 2968680
Currently in WTC mode the candidate AP RSSI threshold
configuration is applied for candidates on all band.
Add support to configure the candidate AP RSSI threshold for
different bands.
Change-Id: I94442c0f1bd3ea20dc2f5ebe893a9ead7fb8d890
CRs-Fixed: 2951610
By default, the driver fills the roam scan scheme as none for
all the triggers in WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID
but if the roam scan scheme bitmap is set for particular
trigger, then for the corresponding trigger the roam scan scheme
should be sent as ROAM_TRIGGER_SCAN_MODE_PARTIAL.
Send ROAM_TRIGGER_SCAN_MODE_PARTIAL if roam scan scheme bitmap is
provided.
Change-Id: I82f16f7c0e24be472c95278eb3085f7d2623b63a
CRs-Fixed: 2914142
When "wmi_service_configure_roam_trigger_param_support" service
bit is set populate roam score delta and min rssi parameters
and send via WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID.
Change-Id: I3c7fc56a95c28c43992763be3351d91d9fd44041
CRs-Fixed: 2890148
Currently when SAE single pmk lifetime expires, the userspace
issues disconnect. To avoid this, on reaching a threshold value
of the total pmk lifetime, the firmware will clear the single
PMK and initiate a roam scan to perform full SAE and derive
new pmk.
Add changes to:
1. Send the remaining single pmk timeout value in seconds to
firmware.
this is calculated as the diffence in pmk timeout configured by
userspace and the time passed after set_pmksa was done (which is
system timestamp between the set_pmksa timestamp and timestamp at
which RSO command is filled).
2. Add internal roam trigger for SPMK timeout trigger.
3. Set the roam score delta value as 0 for SPMK timeout roam
trigger.
Change-Id: I62c2ddbbfeb2811a4342d41f2bdaa8d988568bcc
CRs-Fixed: 2869665
The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the roam RSSI TH reset.
This helps in debugging/understanding the scenario when roam
failure happens.
Print the info received related to roam RSSI TH reset into kmsg.
Change-Id: Ibee9fc6e9220511d6679efb24080c79bcd807ab8
CRs-Fixed: 2826321
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for cm/wmi roam related files.
Change-Id: Iec350f032c3e037204f560199d4a6e258ac02688
CRs-Fixed: 2810145
To discard 5G candidates based on RSSI threshold, Introduce
a new INI "min_rssi_for_2g_to_5g_roam" to configure the RSSI
for High RSSI Trigger.
Min: -120
Max: 0
Default: -70
Change-Id: If4545296ef1b53d18b8ae4abf12d450f5e690240
CRs-Fixed: 2789017
The MDID is not updated in RSO command. So FT roaming
failure happens.
Update the MDID in RSO commands.
Change-Id: Ie68b379ab29c063c90d8461d0be34fd09a105e3f
CRs-Fixed: 2795319
Currently the roam scan scheme for each trigger is hardcoded to
either full scan or partial scan followed by full scan. Based on
the new requirement for home scenario,the user space configures
roam scan scheme for various triggers. Add support to send scan
scheme type for indvidual roam triggers enabled from userspace.
The default value of roam scan scheme can be modifed for
below roam triggers:
WMI_ROAM_TRIGGER_REASON_PER,WMI_ROAM_TRIGGER_REASON_BMISS,
WMI_ROAM_TRIGGER_REASON_LOW_RSSI,WMI_ROAM_TRIGGER_REASON_BSS_LOAD,
WMI_ROAM_TRIGGER_REASON_BTM
Change-Id: If8b185897b813afc44af362d31172705ea4d7b5c
CRs-Fixed: 2785233
Add vdev id in RSO stop commands to make sure that command is sent
for proper vdev. Also add vdev id in all RSO commands logs
Change-Id: Iefa1e8ba177a64e141726ebaef15b250446a0af2
CRs-Fixed: 2789615
Fix roam scan mode tlv formation for secure connection.
11i tlv is not filled due to wrong akm check in
wmi_fill_rso_tlvs().
Fix the akm check in wmi_fill_rso_tlvs to fill the roam scan mode
tlv properly.
Change-Id: I59ec0e34139ac4a6d6e2bcc03e84ac695292b1f2
CRs-Fixed: 2778658
Currently, gRoamBeaconRssiWeight is not used in HOST or
FW.
Remove unused roam ini param gRoamBeaconRssiWeight.
Change-Id: Ida6ddb8ca5805f819c4d3f7e6ed96c705fa6594f
CRs-Fixed: 2767533
Pass rx data rssi triggers and rx time to firmware.
Add log in wmi to narrow down host and firmware issue.
Change-Id: I255e02ab8f2c88a29619a49d9c2055bdaa75642a
CRs-Fixed: 2768053
FW triggers roaming based on the RSSI score of AP(s) available
after background scan. Currently, the host does not configure
the value of bg_rssi_threshold RSSI. This results in ping-pong
roaming after background scan, even though candidate AP
RSSI is not better than 5dbm than connected AP.
Fix is to configure the value of bg_rssi_threshold via new
INI "bg_rssi_threshold" and configuring default value of
INI as 5dB.
Min: 0
Max: 100
Default: 5
Change-Id: Ib710e294c8b33ff4903d41453e3b55f02daf53ae
CRs-Fixed: 2763962
SAE Public Key (SAE-PK) authentication is an extension of SAE. Host adds
support for SAE-PK APs roam score which host uses to select AP for initial
connection and roaming.
Change-Id: Id8c420950bb8c1d11db5a26aa860e280bcb672d1
CRs-Fixed: 2769372
Move the rssi change vdev params initialization to
csr_neighbor_roam_info_ctx_init() so that vdev priv object will
be created and per vdev parameters are saved and proper values
are sent to firmware.
Change-Id: I87c8272d89f431fa3db60beed4d1da6d9790ec28
CRs-Fixed: 2774826
Add debug logs on the sending WMI_ROAM_SCAN_RSSI_THRESHOLD
/WMI_ROAM_FILTER_CMDID/WMI_ROAM_BTM_CONFIG_CMDID
/WMI_11K_OFFLOAD_REPORT_CMDID commands path.
If mawc roaming is not supported by firmware, don't send
WMI_ROAM_CONFIGURE_MAWC_CMDID command.
Add rssi reject AP list to the roam params process in function
csr_cm_roam_scan_filter().
Change-Id: I89e6dcac801e552877f7e918d1179dfa3466857a
CRs-Fixed: 2775101
In wmi_fill_rso_start_scan_tlv(), the fixed param header is
overwritten with 0. So this causes roam scan mode command to
fail.
Don't overwrite scan start fixed param in
wmi_fill_rso_start_scan_tlv(). Also add some additional debugs.
Change-Id: I8ae7053e77d5694bade7e4a84fb4028d8224354c
CRs-Fixed: 2771951
3 ini:
roam_data_rssi_threshold_triggers
roam_data_rssi_threshold
rx_data_inactivity_time
If there's rx activity during latest rx_data_inactivity_time
and avg of data_rssi is better than roam_data_rssi_threshold, then
suppress roaming triggered by roam_data_rssi_threshold_triggers: low
RSSI or bg scan.
Change-Id: I5b41c4119e61392b50e52ab8ccb8650e5758f3b3
CRs-Fixed: 2768053
Adds support for sme_abort_roaming for ROAM_OFFLOAD_V1.
Also fix compilation error for ROAM_OFFLOAD_V1.
Change-Id: I06247b1118b7dee32ff392b247e2e08e32dbaf9f
CRs-Fixed: 2768397
Add changes to send roam scan mode over RSO start/stop/update_cfg
from connection manager. Update the roaming params and roam scan
params to new structure.
Refine send_roam_scan_offload_mode_cmd_tlv().
Change-Id: I6adce2e8a24ece93a079032d0e66760393fcdccd
CRs-Fixed: 2766023
Add support to send WMI_RSSI_CHANGE_THRESHOLD command to firmware
in connection manager.
Change-Id: I97d4b8f8fc0e938ede0e61d44eb8ffbcbb0fb4ff
CRs-Fixed: 2761043
Add changes to define structure to hold the WMI_ROAM_SCAN_MODE
command related parameters.
Also added minor cleanup changes.
Change-Id: I24ef18e05de8dd05ee437e440651ea9ab0731e46
CRs-Fixed: 2758316
As per requirement, send a value of an INI "roam_score_delta" to FW
through WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID.
Change-Id: I9a2087f83c2eb95338d440dc901bd8aa246f7e5f
CRs-Fixed: 2740552
Print info related to WTC BTM roaming coming via
wmi_roam_trigger_reason_tlv_param.
Print timestamp, which indicates the time when btm response is sent
to AP, coming via wmi_roam_btm_response_info_tlv_param to HOST.
Change-Id: I2c408527739e1e2831015dd7b959ab17299abf6b
CRs-Fixed: 2740597
Add macro ROAM_OFFLOAD_V1 for new code and implement below functions
for connection manager roam part:
csr_handle_roam_state_change() roam offload state related handler.
Filling WMI_ROAM_SCAN_RSSI_THRESHOLD cmd parameters related process.
Change-Id: I0351155ca5a3d68ade6568c7527c5708582ccf1a
CRs-Fixed: 2730826
Userspace can configure different roam control params as
defined in qca_vendor_attr_roam_control through the roam subcmd
QCA_NL80211_VENDOR_SUBCMD_ROAM and the below attributes:
QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_SCHEME
QCA_ATTR_ROAM_CONTROL_CONNECTED_RSSI_THRESHOLD
QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD
QCA_ATTR_ROAM_CONTROL_USER_REASON
Send value of above attribute to fw through command
WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID for trigger
reason WMI_ROAM_TRIGGER_REASON_BTM_WTC.
Change-Id: I17502eebab56652192164144b7ebdadb32033117
CRs-Fixed: 2729119
The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the btm response.
This helps in debugging/understanding the scenario when roam
failure happens.
Print the info received related to btm rsp and roam initial
info into kmsg.
Change-Id: Icb2058eed5df3265018b3c53548d123f3a4faf4f
CRs-Fixed: 2728267
