Sometimes fw sends roam event with RSO status 7, it does not need
host driver trigger in function target_if_cm_roam_send_stop. When
this scenario happens, driver tries to stop the timer which does
not started and dumps wrong info.
Change-Id: I82f723bb8e8c5b6108caff48a9189eeaf2686a2c
CRs-Fixed: 3261664
In target_if_get_roam_vendor_control_param_event_handler,
there are 2 possible NULL pointer dereference issues:
1. Host calls target_if_get_psoc_from_scn_hdl API to get
psoc object. But as per current logic even if psoc is
NULL, psoc is dereferenced by passing it as an argument
to get_wmi_unified_hdl_from_psoc.
2. Host calls get_wmi_unified_hdl_from_psoc API to get
wmi_handle pointer. But as per current logic even if
wmi_handle is NULL, wmi_handle is dereferenced by
passing is as an argument 1 to function
wmi_extract_roam_vendor_control_param_event.
Fix is to update the sanity check logic for psoc and
wmi_handle pointers to avoid possible NULL pointer
dereference.
Change-Id: I3c3df062b538b05218e729d7bf6806e221073269
CRs-Fixed: 3242435
Add infra to support Dedicated Bluetooth Antenna Mode (DBAM)
feature. It is used to switch between dedicated antenna for
BT and shared antenna for WLAN and BT.
Change-Id: I20b08a2fd446da4e3c17813aa64e368750286114
CRs-Fixed: 3239896
Acquire the runtime pm lock when roam sync event is received
and release after roam sync complete is sent.
Change-Id: Ic56d353dd343f5fcbc228a8d7251e047177b9a9b
CRs-Fixed: 3238723
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_CMDID: Add support
for a new roam command to get vendor control parameters
from FW. Host needs to send proper param ID in command
(from enum WMI_ROAM_GET_VENDOR_CONTROL_PARAM_ID)
to get corresponding INI value from FW.
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_EVENTID:
Add support for a new roam event to get param value
from FW. FW sends this event upon receiving
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_CMDID command.
Change-Id: I03679bcf359a0f425aab7b9ea1c3cb6d84fbb0ca
CRs-Fixed: 3225160
Add support to parse a new INI named
"bss_load_trigger_6g_rssi_threshold/RoamCU_6GRSSIRange"
and send its value to FW via WMI_ROAM_BSS_LOAD_CONFIG_CMDID.
Min, Max and default value of this INI:
Min: -120
Max: 0
Default: -70
Change-Id: I9aa99d887553de4022fc0a31dc0644601cd340d6
CRs-Fixed: 3225548
Currently host sends first, final bmiss count to fw
Add support for bmiss timeout(in seconds)
during wakeup as well as sleep state to fw.
Change-Id: Id748fabdff94f5fa3038bcea1b1cac733ac2dbe1
CRs-Fixed: 3224106
Currently target_if_cp_stats_extract_vdev_summary_stats
function prints bcn SNR which can be RSSI as well based on
whether firmware supports reporting rssi or not.
Add check for firware support to print RSSI/SNR
Change-Id: Ifef7bfad7d79c1a1bb84641bc1d3632f6d683252
CRs-Fixed: 3209907
Add target_if API to send ARP request, LRO config and
DHCP indiacation to firmware.
Change-Id: I2d4af7a5da6c29398ab00205654df9be3d90b665
CRs-Fixed: 3165155
Add support for QCA_WLAN_TWT_SET_PARAM command to configure
QCA_WLAN_VENDOR_ATTR_TWT_SET_PARAM_AP_AC_VALUE attribute.
This attribute provides access category value for
WMI_PDEV_PARAM_TWT_AC_CONFIG. This is used by firmware to
configure access category for TWT HW queue in TWT Responder
mode(SAP).
Change-Id: I5131967ff2061bf6afad7bc5f091a7eb5ee01b8a
CRs-Fixed: 3168197
Replace slave for target, and replace
master for initiator which pair of slave.
Change-Id: I4f758a2149f9314d92cc775d2d665ada0d8c8a43
CRs-Fixed: 3169100
Currently wmi_roam_event_id event handler only register under feature
WLAN_FEATURE_ROAM_OFFLOAD, but it's needed for LFR2 roaming too. So
refine roam event processing for LFR2/LFR3.
Change-Id: Ic07fd8a543142fc1e151f484979ab99ff55ce802
CRs-Fixed: 3161973
Add and Register target if API to process MCC
quota wmi event. Deliver the event to existing
interfaces.
Change-Id: Ib044a336af2f5093dffbb053e65a52a174b85154
CRs-Fixed: 3101870
Rename files with blacklist/whitelist to denylist/whitelist.
Rename files with blm to dlm.
Change-Id: Ief7ce0a797f74460c9708f8d2dd440412af5b7eb
CRs-Fixed: 3099864
Replace blacklist/whitelist with denylist/allowlist in
qcacld3.0. and replace blm with dlm.
Change-Id: I9ba61dde3b3ea008ca3777448d1f8dab83d33ec1
CRs-Fixed: 3091211
Firmware doesn't expect any vdev commands from host while RSO stop
is happening. It sends a response to the RSO_STOP command once
it's done with cleanup. Host needs to run a timer after sending
RSO stop command to firmware and wait for a maximum of 6 seconds
for the response. Host can stop the timer and allow the commands
to firmware in the below cases,
1. RSO_STOP response with success status
2. RSO_STOP response with HO_FAIL status followed by
HO_FAIL event: Host needs to wait till HO_FAIL event is received
If firmware doesn't send any response in the 6 seconds wait, issue
a recovery to help to check the firmware state.
Also, set WMI_ROAM_SCAN_MODE_FLAG_REPORT_STATUS always when MLO is
supported while sending RSO_STOP to firmware. It's sent only
in case of wpa_supplicant disabled roaming currently.
Change-Id: I8182e60beb9288dba23cc72e978dc781c8ab1707
CRs-Fixed: 3106023
In TWT component, add support for TWT nudge command
i.e when host wants to suspend the TWT session.
Change-Id: I176fdaf0f2ccc2d0656f9108484fc80b409268ef
CRs-Fixed: 3085999
In TWT component, add support for TWT pause command
i.e when host wants to suspend the TWT session.
Change-Id: I8a60bb40fe9d37121d700f246b91e3211af66189
CRs-Fixed: 3085990
Replace blacklist/whitelist with denylist/allowlist for
blacklist manager component. and replace blm with dlm.
Change-Id: I8dec146d8cb3b61dc891b72bea44704b8ab733fe
CRs-Fixed: 3087575
When wmi_roam_synch_frame_event receieved from firmware, memory is
malloced to save probe rsp/reassoc req/reassoc rsp once extract event,
when copied to vdev rso_cfg->roam_sync_frame_ind, memory is malloc again,
and original memory isn't freed, memory leak happens.
To fix it, assure memory is only malloced once to save
probe rsp/reassoc req/reassoc rsp when handle wmi_roam_synch_frame_event.
Change-Id: I6b31378bcf624547fca9fd858268252fd22f533d
CRs-Fixed: 3107576
Add support to send qos null frames received from firmware on
STA interface to mon interface based on config value. The config
value get update based on vendor command set by user.
The packet filter check in ucfg_pkt_capture_process_mgmt_tx_data
moved to target_if_mgmt_offload_data_event_handler. So that we
will not allocate any buffer if filter is not set.
Change-Id: I426b340c5a65711ada971062af95ae039d18d0bd
CRs-Fixed: 3076241
During SAE roam auth offload, update the beacon/probe response
frame coming from the FW via WMI_ROAM_FRAME_EVENTID into the
scan db.
When the bss info of the preauth candidate is unavailable in
the host/kernel scan entry, supplicant fails to determine the
proper SAE PWE config of the peer and the commit request fails.
Change-Id: Ia782ece7bebf8274f949fe9fb3b2a2882bf47597
CRs-Fixed: 3075458
Currently memory allocated for structure roam_pmkid_req_event
is freed in two places causing usage after free.
Fix is to free memory only once in
target_if_pmkid_request_event_handler api.
Change-Id: Idc70e8437f89cb1cf4f6d35f924085409994714a
CRs-Fixed: 3064667
For allowlist roaming, EAPOL isn't offloaded for PMK changed, then
RSO is stopped and allowlist ssid is cleared in F/W, but when RSO
is restarted after EAPOL finished, allowlist ssid isn't reset to F/W,
so allowlist roaming will fail after that.
To fix it, when roam start or update cmd is sent to F/W: update
allowlist ssid and denylist to F/W.
Change-Id: Ia8ddc251767dfc04d9a6cfd1e7c1074ab0e88e96
CRs-Fixed: 3081226
Current only TYPE_STATION_STATS is designed to be send
by qmi. and other request type should send by wmi.
if sending by qmi, qmi_get/qmi_put should be call to protect
qmi send and qmi response.
Change to check type and only allow TYPE_STATION_STATS to be
send by qmi.
Change-Id: I57b0bdb6717e259606993ea24ef024745a456664
CRs-Fixed: 3073744
Support to deliver below mlme event to SON:
MLME_EVENT_VDEV_STATE,
MLME_EVENT_INST_RSSI,
MLME_EVENT_TX_PWR_CHANGE.
Change-Id: I0535d80cea155f5b94abecfa609d34940e57cdd7
CRs-Fixed: 3054810
Add new vendor command to enable the roam events stats from the
driver/FW in both resume and suspend mode.
New roam param is introduced to indicate the FW to enable/disable
the roam stats using the new roam set command.
Change-Id: I6d04f0946e6735613a4cf3d4361bf31052314fa0
CRs-Fixed: 3036518
Currently, target_if forwards the blacklist event to upper layers
even if there is no AP info present. This event can be dropped in
target_if to avoid accessing unallocated memory.
Change-Id: Icfaabb0a8e3304882979ffde7f5cd27fd4c8a067
CRs-Fixed: 3057424
Currently WMI_DBGLOG_TIME_STAMP_SYNC_CMDID command sent
every 1 sec causes RTPM collapse and inturn has power
impact. So to avoid this enable time of the day synchronization
only after connection/roaming.
Send WMI_DBGLOG_TIME_STAMP_SYNC_CMDID as part of RSO
start command.
Change-Id: Iee3cefe1318a6e5507a43cefb9666cc2a439fe06
CRs-Fixed: 3060762
FW may experience HWDTIM mode enter and exit, if HOST can't queue
frames fast enough, this will bring 10ms latency for TX under WoW.
This change adds an indication bit to notify FW whether a TX happens
after WoW wakeup, then FW can discard HWDITM and reduce TX latency.
Change-Id: I74f7311fc0639186ee0bca711160bb8c0d5d9fb3
CRs-Fixed: 3055501
Add support to offload icmp feature to fw in case of
suspended state to avoid high power consumption.
Change-Id: I3ff19d71eac530c75be57e6b52b975e755ff2a53
CRs-Fixed: 3042452
wma to target_if convergence code is guarded under the feature
flag ROAM_TARGET_IF_CONVERGENCE and it's is enabled currently.
Remove the flag usage and remove the deprecated code(else part)
also.
Change-Id: I6973d9c366ec6a9c6164dd19f6f4775dd3ebf5f0
CRs-Fixed: 3049942
Add tgt support in packet capture component to send user
configured beacon report interval to FW.
Change-Id: Ibeb9f9a7f9ad2c2afa6929c492bd1029784b5f9e
CRs-Fixed: 3046224
In packet capture component add support to send ctrl and beacon
frames config to FW based on frame filter received from user through
vendor command.
Change-Id: Ie45ea2135e237a156fb60663e3f85cc601490e4a
CRs-Fixed: 3046222
Currently, the ROAM event is posted to scheduler thread when it's
received from firmware. This is done to avoid processing the
complete event in IRQ context as the same callback gets called
from IRQ context for WOW events(WOW_REASON_LOW_RSSI and
WOW_REASON_HO_FAIL). Posting the ROAM event to scheduler
thread may introduce some additional delay in processing it back
as there would be a context switch.
If this ROAM event carries ROAM_START which is followed by a
ROAM_SYNC event, there is chance to process the ROAM_SYNC
before ROAM_START as ROAM_SYNC would be processed in the same
context whereas ROAM_START needs a context switch. This results
into an invalid connection manager state after processing
ROAM_START event, which results a connection failure.
Same is applicable for ROAM_PMKID_REQ_EVENT and
ROAM_VDEV_DISCONNECT_EVENT. Avoid reposting the same to scheduler
thread.
Change-Id: Ic4fc1b3baf12e4ceee9a0975ebfee77fb88ab6f0
CRs-Fixed: 3033657
Send additional roam trigger TLV for BTC in
WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID
command, to support a new roaming trigger
"WMI_ROAM_TRIGGER_REASON_BTC".
Change-Id: Ib767bd6bcf005c187b0fb58986ad287fe8753c1b
CRs-Fixed: 3009788
target_if expects psoc as part of roam events which is used for
event extraction. Send the same as it's missing currently.
Change-Id: I04729df90d8e64e07427fe47926a8a92a24aaf23
CRs-Fixed: 3027055
Currently, wmi_roam_pmkid_request_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I3fad4e4d7ceeb85c632723e161809bf980d5375f
CRs-Fixed: 3014248
