Display control pipes info on WOW ack failure which helps to
debug issues when full debug history is not available.
Change-Id: I6a84aa01c07831b7109d0741337cae6ac0be2f44
CRs-Fixed: 3246284
Currently a userspace request to enable NS offload dynamically
gets rejected if the offloads are in disabled state.
After this change, when a request to enable or disable of NS offloads
is received in the host and if the trigger type is to dynamically update
the NS offloads, then update the dynamic offload configuations and inform
the FW.
Change-Id: Ifb4a1d37b5f2e6c89d043b00f9cc0aaf426d870e
CRs-Fixed: 3237980
With restructuring in hif runtime pm module, modules are
required to register with the hif runtime pm module. Also,
link states are depreciated.
This change registers PM QOS and bus suspend modules which
use runtime PM module and replace link state with resuming
link up state in PMO resume.
Change-Id: I0df48e3d31a1fb0f03faaa0617b48937c9bc224b
CRs-Fixed: 3169425
-Wimplicit-fallthrough is being enabled by default. Some compilers
such as clang require the attribute instead of just a fallthrough comment.
Change-Id: If55d68cb76589b39b88d859ea4d9fa6e10246c7e
CRs-Fixed: 3217399
This reverts commit I06ea617df49287ee87e7b5bf8b20971b581dedf1
which introduced a fix to enable/disable arp offload on every
suspend/resume even if gActiveModeOffload is enabled, which is
not correct. The expectation here is that if gActiveModeOffload
is enabled, host should enable arp offload only onece and it
should not disable on any condition.
Change-Id: Ifc4ff1c0a39cc4c17e9a292ef8b0ebabd766a710
CRs-Fixed: 3147896
Currently mac address is getting configured as the wow pattern
while the vdev is getting created, configure the mld address also
during the vdev creation so during legacy connection or roaming
between the ml-legacy vice versa there wont be packet drops because
of pattern mismatch.
Change-Id: I9b98649bca132a6665f2e4dd94d9c6b840223827
CRs-Fixed: 3124115
During vdev creating, RTPM suspend/resume may happen, after vdev
created in host, if ITO config wmi cmd is sent to firmware
before vdev create wmi cmd, firmware will assert for invalid
vdev.
To fix it, only config ITO when vdev is up.
Change-Id: I3d744d7fffd9afc7780d3a19c92613a94556cfa0
CRs-Fixed: 3152034
PASN peer create request event and deauth events need
host actions and notifying the userspace.
So register for PASN events to wake up host.
Change-Id: Ic83f10984d4e4d5ee0f1e8a5d7c4fbc321395a26
CRs-Fixed: 3150120
Some rogue AP sends beacon frames with TIM bit set for long time,
DUT STA need response a qos null frame, if ITO(inactive timeout) is 200ms,
STA can't get a chance go to sleep for long time during WoW, assert will
happen at last.
To fix it, for both system suspend and runtime suspend/resume, config
ITO to short value(50ms) when trigger FW to enter WoW mode, and config
ITO to default value(200ms) after exiting WoW mode.
Change-Id: I8f84afaf2ba030bbb9acf5c7ea78de583c634424
CRs-Fixed: 3146685
When host resume, check arp offload status wrongly, so arp offload
disable cmd isn't sent to F/W. when next suspend comes, arp offload
enable cmd isn't sent too.
Change-Id: I06ea617df49287ee87e7b5bf8b20971b581dedf1
CRs-Fixed: 3106172
As per the current implementation, the ADDBA_REQ bitmap setting
overwrites DROP_SPEC_MGMT_ACTION_FRAME_BITMAP. Hence, to avoid it,
remove the ADDBA_REQ bitmap setting.
Change-Id: I1135a64de99248b67e477d3276b217c128c1a721
CRs-Fixed: 3081291
In some scenario, it is required to receive every ARP/NS packet even
it is not to solicit address itself. So add this vendor attribute
configuration to enable/disable ARP/NS offload on fly.
On some platform, if target suspend to WoW mode, APF filter will drop
such ARP/NS packet in the front, so prevent runtime suspend happen
if disable ARP/NS offload. System suspend still allow in consideration
of potential power impact.
It only support on STA/P2P-Client mode device, and this configure is
optional, while default behavior is ARP/NS offload enable. It will
restore to default behavior if interface being closed.
Change-Id: Icd49e230024bc1ce51519cd9fafee9bc9f79f382
CRs-Fixed: 3058494
INI item enable_dynamic_pcie_gen_speed_switch is no longer. Hence,
delete all uses cases of it.
Change-Id: I1082620c4354bda48ebc54aae7e72e5a81c4aa94
CRs-Fixed: 3068122
The ini gEnableWoW was designed to enable or disable both magic
pattern match and pattern byte match, but now host ignore the
magic pattern setting from the ini, always enable the magic
pattern instead.
configure magic pattern in line with ini gEnableWoW setting.
Change-Id: I309aff03de9bdbd36fe391784ba54cbfa0cad67b
CRs-Fixed: 3047199
Add support to offload icmp feature to fw in case of
suspended state to avoid high power consumption.
Change-Id: I3ff19d71eac530c75be57e6b52b975e755ff2a53
CRs-Fixed: 3042452
gSuspendMode is for system suspend to choose between WoW and pdev
suspend. For RTPM suspend, should always enable WoW.
Change-Id: Ibf95ca79ded73f9c68e14b8dac4ec68d979f9db6
CRs-Fixed: 3047812
Add new ini item gEnableIcmpOffload to enable/disable
ICMP offload to firmware.
Change-Id: I107aeec4c75ae18fbe37d373e48339a5b76797aa
CRs-Fixed: 3025650
SAP/GO D3 WoW feature is not supported when IPA is enabled and hence
disable SAP/GO D3 WoW features when IPA is enabled.
Change-Id: Ia3da37087a0ca79c81c546f43a0893e46cf08c3c
CRs-Fixed: 3015104
Currently intermediate EP vote access is set without checking
for previous state and reg work handler completion.
In some of the error scenarios when resume is triggered from
suspend path, EP vote access is still enabled and work handler
will be scheduled for register updates.
So make sure reg work is completed before setting intermediate access.
Change-Id: I7a1e55c188b9a9e85309dd44ac03651181499674
CRs-Fixed: 2994039
Add new ini item enable_dynamic_pcie_gen_speed_switch for enabling
dynamic PCIe gen speed change.
Change-Id: I7dde4e40e56bf894c7edd0805d09425444648e6b
CRs-Fixed: 2977079
Due to the limitation on third party platform, add ini to take
special care of the below wow case to avoid fw crash.
The sap/p2p_go shall kick out all the connected sta/p2p_gc and
then go to suspend if d0wow/d3wow is not supported.
Although there is wakelock try to prevent suspend after tdls link
setup, it won't take effect because auto sleep mechanism is not
supported on some third party platform, so teardown tdls link
by force before suspend.
Change-Id: I14bfe32f04cfc34d4f55a09820e42e65a1d9f925
CRs-Fixed: 2935295
Extend hdd_config_modulated_dtim() to configure moddtim
dynamically in the both non li offload and li offload mode.
Change-Id: I8669ec618d4aa9cd87c4c234972ca500c98119b6
CRs-Fixed: 2970090
Add debug log to print more details about the link vote id when
PCIe link suspend is not allowed.
Change-Id: I5069202436e0da37b8ae22f84e28ac06d35002b5
CRs-Fixed: 2964957
Set intermediate EP vote access before host
wake up indication smp2p is sent to F.W,
this helps to avoid smp2p override.
Change-Id: I4b998ee5ea6b26921855bfbae434869fb93accf9
CRs-Fixed: 2953883
Sometimes we need PDEV suspend mode, WMI_PDEV_SUSPEND_CMDID and
WMI_PDEV_RESUME_CMDID. But currently design, only support WoW
suspend or not support two choices. And, there are two confused
ini configuration, gDisableWow and gEnableWoW.
1. Add new ini gSuspendMode to set suspend mode. Default 2.
0, does not support suspend
1, legency pdev suspend mode
2, WoW suspend mode
2. Clean gDisableWow. It is replaced by gSuspendMode=0.
HDD suspend/resume function get the value by new API
ucfg_pmo_get_suspend_mode().
Change-Id: Icbeef3df6879ca2054f64e0292e9b9469c4936d4
CRs-fixed: 2940788
HIF PM link state is used to indicate bus is alive or not. This
indicates RING HP/TP updating directly or using async method.In
RTPM suspend failure flow, CLD reject RTPM suspent request, but
state is not resumed correctly.
Change-Id: I3b96dc1fb34e2810d721e1fcb4db609a3d1d684d
CRs-Fixed: 2919930
Currently in the WoW design of Moselle, EXT GRP IRQs are
enabled before sending SMP2P power save exit message is
sent to the FW. Because of this, any pending IRQs in the
GIC will immediately fire and could race with the SMP2P
power save exit logic. Any access to the registers done
before power save exit would result in system errors.
Enable the EXT GRP IRQs after sending power save exit
command will fix the problem.
Change-Id: I16f580279b5aa24861ab5111b9c13db3e38063f4
CRs-Fixed: 2925554
psoc_cfg is pointing to the address of a structure variable,
which will never be NULL.
To address this remove the NULL check.
Change-Id: I12f539ce2feace550c403ffc996fa315994470a7
CRs-Fixed: 2911862
There is a compilation error due to use of PMO_ACTION_BLKACK, which
is not defined. Change PMO_ACTION_BLKACK to PMO_MAC_ACTION_BLKACK to
resolve this issue.
Change-Id: I011c4c323bfa7d104c6a6879aba93085a35fed3d
CRs-Fixed: 2923577
offload igmp feature to fw in case of suspended state
to avoid high power consumption.
Change-Id: I05fbf23dc2836f8f5dc6e2f45b35bf2d30c39790
CRs-Fixed: 2907644
Currently runtime resume is marked as success after kicking
HTC queues, due to this non PM marked WMI commands are not
sent out properly.
Fix this by marking runtime resume as success before kicking
HTC queues, since resume is set as success as part of HTC kick
queues WMI commands will be sent out properly.
Change-Id: I5e3f98cbc5888bdf83f760b055c9b706c18737ef
CRs-Fixed: 2899609
Set system state in hif ctx to suspend or resume on
system suspend and resume respectively.
Change-Id: If1904a4fe5c861deed1b35071be10cb8cc8d6407
CRs-Fixed: 2899520
As part of WiFi ini clean-up FR, the ini parameter
gDataInactivityTimeout, is identified as it is no longer used
and hence it can be deprecated.
Change-Id: Ic01ba8934058cf2fb3bec042f11b01ea70ef7a3f
CRs-Fixed: 2896042
This is to enable feature for detection CE tasklet
scheduling delay and credit response delay issue.
Change-Id: I659aa23eabaa28bfb11051bf15e0343c94061b86
CRs-Fixed: 2874867
Any update to the SRNG TP/HP when the device is in low power
state would result in system errors. While in D3 WoW mode,
disable EXT grp irqs and drain TXRX before sending enter
power save mode to the FW. This will ensure that no interrupts
are received while in WoW mode and as a result there wont be any
HP/TP updates.
Change-Id: Ic1fb7fdd45096b458abf5d243fa652c3da878dc0
CRs-Fixed: 2890568
Add vendor command interface/feature through which the user
or vendor can set the dtim count as per their requirement.
Change-Id: I26010948c4ed7e3c49bfe0453119235d4f438c6f
CRs-Fixed: 2894349
Possible wmi cmd is queued in suspend, if no more
htc_try_send comes from credit response or new wmi
cmd, wmi cmd will pending.
Fix is always kick htc queue if suspend failure.
Change-Id: I05e0cd6983e1d27de5bf109c3ddf05e4bdc12fd8
CRs-Fixed: 2895808
Currently when TWT commands are sent to firmware, the host driver
doesn't acquire wake lock. So the wlan can got to wow mode before
receiving the TWT command response and the response will get
dropped since host is in wow mode.
To avoid this make the TWT events as wakeable so firmware can
wake up host if host is suspended.
Change-Id: I2750049f9173de564e24114731d3fdd8ec8d6d86
CRs-Fixed: 2869865
