If DBS mode is supported, when station is connected in 2g channel, sap
should be able to start in dfs channel.
Allow sap start in dfs channel if sta is connected in 2g for DBS mode.
Change-Id: I189651785982b0f08a286da9f5dbe8c91b1f16c4
CRs-Fixed: 2654949
If Miracast is on, driver should send WMI_RESMGR_SET_CHAN_TIME_QUOTA_CMDID
to FW. Currently this wmi is blocked because gEnableMCCAdaptiveScheduler is
set as 1, which is incorrect.
Add a new dynamic_mcc_adaptive_sched flag to allow wmi command
WMI_RESMGR_SET_CHAN_TIME_QUOTA_CMDID for Miracast case.
Change-Id: I18e713b75a8cafc1b631bf5a1884a9b0123e5dba
CRs-Fixed: 2652271
In the API policy_mgr_checkn_update_hw_mode_single_mac_mode
the driver checks that if the bands are different, then go
for DBS and single mac mode is not required.
In the case of STA on 5ghz and SAP now coming up on 6ghz
the bands would be different but the hw mode needed
would be single MAC mode and not DBS, but according to the
check mentioned above the driver would still return and
the final hw mode would be stuck into DBS which would
lead to unnecessary power consumption because of the second
MAC being still swithched on having no vdev attached to it.
Fix is to check whether DBS is required and avoid the condition
mentioned above.
Change-Id: I91d91894dde1a3b84c22f9de59c83a5f0b727315
CRs-Fixed: 2651178
Table pm_next_action_three_connection_dbs_2x2_table currently
doesn't support NeGo/Auto 5G + SAP 5G + SAP 2.4G case, which
cause the third connection for 2.4G SAP start failure, so update
the policy manage table to support it.
Change-Id: I4bed516f2ac31387d94c1753a7d539cc07d9814e
Currenly only hdd initializes channel avoidance from platform.
Policy manager should also initialize channel avoidance from platform.
Change-Id: Iefcaae5ff4789d7d334ab2cab693f5dedfd2ca46
CRs-Fixed: 2645512
Make sure NULL pm_ctx pointer not be accessed before initialization.
Before initialization, __policy_mgr_check_sta_ap_concurrent_ch_intf
return directly when meet error condition.
Change-Id: I4a96ca7c18d7c524969b8ea95d3bc717cfb0862c
CRs-Fixed: 2642567
Currently QDF_MAX_NUM_CHAN/POLICY_MGR_MAX_CHANNEL_LIST aren't aligned with
NUM_CHANNELS, these unalignment may cause some potential OOB access.
So replace QDF_MAX_NUM_CHAN/POLICY_MGR_MAX_CHANNEL_LIST with NUM_CHANNELS
to keep unified.
Change-Id: Ib6c81a3979f2fd29ba1ec678f018a6704b599385
CRs-Fixed: 2644066
Consider SBS mode and 6GHZ, can't force scc only by band.
for example: 1 port on 5G, another on 6G, they may be on same
MAC, may be not. Just compare mac id from connection list
directly.
Change-Id: I5bfc9cd14b058a6a4f402c0e2d2f9ae7da8287fb
CRs-Fixed: 2646499
policy_mgr_pdev_set_hw_mode returns failure if there is interface doing
CAC, which causes other interfaces start failure.
Check mode action are needed or not can help reduce interface starting
failure.
Change-Id: I165f9287d0a674d907712817a7363a77504c245f
CRs-Fixed: 2625868
If there is no STA/P2P CLI on same MAC of SAP/P2P GO,
SAP/P2P Go needn't switch channel to force scc.
Change-Id: I529a57f73f529e41b8c0097fccabbe3e0e516993
CRs-Fixed: 2643106
Use INI "sta_disable_roam" to disable roaming on STA interface if
connection on other interfaces ex. p2p, ndp comes up. Each bit of
the INI "sta_disable_roam" represents an interface.
ex. LFR3_STA_ROAM_DISABLE_BY_P2P BIT(0)
LFR3_STA_ROAM_DISABLE_BY_NAN BIT(1)
As INI "sta_disable_roam" is generic for all the interfaces, cleanup
for INI "p2p_disable_roam" done.
Change-Id: Icd05a97c640ca07978d9960a33de036ed6fe38df
CRs-Fixed: 2637555
The default value of ini gDualMacFeatureDisable is 0 and this
enables DBS scan with simultaneous scan from upper layer to
firmware. P2P scans get priority over sta scans and when
continuoes p2p scans are issues from some userspace application,
STA doesn't get scan time and APs in the environment are not
seen the scan results on STA interface.
To avoid this, change the default value of the gDualMacFeatureDisable
to 6, which disables simultaneous scans from upper layer to the
firmware.
Change-Id: I7ea3ed521270fc50acba30f84749d35ee60fcaa0
CRs-Fixed: 2632562
Disable GRO/LRO when NDP session is established and
enable it back after tear down of last NDP session.
Enable back GRO/LRO only if there is no active session
or there is no concurrency with STA MODE.
Change-Id: I322888fa18e8bef19844b626c94efac201550b0c
CRs-Fixed: 2631044
Bringup 3 ports GC(5G)+SAP(2.4G ACS mode)+SAP(2.4G ACS mode) in
sequence, the second SAP can't get pcl channel, it's wrong.
Fix is to add GC+SAP+SAP configuration items definition to
pm_third_connection_pcl_dbs_2x2_table and
pm_next_action_three_connection_dbs_2x2_table.
Change-Id: I943ed7cdff0bd0920953b60fcb2cfa1f5bf79dc2
CRs-Fixed: 2627832
When dynamic channel switch is enabled, trigger acs and switch to best
channel if wlan interference is found in 5g mac.
Change-Id: I56661f5c42a233a0dc0a6400d75cb8f5c0019706
CRs-Fixed: 2599176
Improve logging in driver by avoiding unnecessary error prints
and combining logs.
Change-Id: Ibab9067aa1bce992f36fca22a5aed88e8d85ba25
CRs-Fixed: 2627549
Enhance logs in policy mgr module to remove duplicate
or unwanted prints and keep only useful logs to debug.
Change-Id: Ifd585256955aceec29286d82838be0c588228c32
CRs-Fixed: 2614763
Currently the driver sets the connection update
flag in case of the hw mode cb when the set
hw mode is done, irrespective of the status
code sent by the FW. This leads to the completion
for wait for event and the caller to the current
connection update would get a wrong expectation
that the hw mode requested by it was set, which
would not be the case when the hw mode is not set
according to the user or the set hw mode was
rejected by the target itself.
Fix is to set the connection mode only when the
status is success or already the HW mode is set.
Change-Id: Ic7257b0be5a4bcdaecffb788cf3394b06ddfd5e5
CRs-Fixed: 2604062
Enable p2p go gc force scc by adding logic to check the connected
p2p gc when checking concurrent channel interfering and restart p2p
go if needed.
Change-Id: Idd01fbc2a358b463568844a420e1132355c1de4e
CRs-Fixed: 2604955
If the request is SBS action and the HW doesn't support SBS,
return QDF_STATUS_E_NOSUPPORT. The caller will continue to
connect/start_ap instead of failure when
policy_mgr_current_connections_update return
QDF_STATUS_E_NOSUPPORT.
Change-Id: I158f90c13e2685697b82c874a247883f21f013cb
CRs-Fixed: 2602194
According to FW, DFS phyerr offload should be enabled before vdev start,
otherwise FW can't start DFS phyerr offload function.
Do not send DFS phyerr offload disable wmi command before vdev stop, and
FW will handle all the necessary cleanup in vdev stop wmi command.
Without DFS phyerr offload disable wmi command, DFS phyerr offload is
enabled before vdev start.
Change-Id: Id6275e9716afb34316cf46b69dd0b4f82b73ac5d
CRs-Fixed: 2598263
Scenario:-
1. Turn on SAP and STA on 2.4ghz and 5ghz
2. Turn off SAP
3. Turn off STA
4. Turn on SAP on 2.4ghz
Issue:-
In the start ap function, the driver calls
the stop opportunistic timer and calls the handler
to goto SMM mode.
After this, the SAP checks whether it requires the
DBS or not and then requests for DBS also, but since
the driver is already in DBS mode this command gets
rejected, so there would be 2 commands in the serialization
queue which would be SMM and start AP, which would lead to
a crash as SMM is sent before a connection on 2.4ghz as
Hastings is not capable to start a vdev in 2.4ghz without
DBS mode.
Fix:-
1.Not allow SMM if the current connection requires DBS
2. Check the HW capabilty in the active command only and
not before that to protect the reliability of hw mode.
Change-Id: I1c0c05ea05ba14d1556af2612daa3de2ffcba367
CRs-Fixed: 2587508
During mdm SAP+SAP+SAP case, if 5G band is disabled for modem
N79 band, need all 5G SAP switch to 2G to force scc.
when 5G band is re-enabled, all 5G SAP can switch back to 5G.
Change-Id: Ief7d7c85a7881885bd95c8af6be8d4e428d07041
CRs-Fixed: 2597602
If g_enable_go_force_scc isn't enabled, P2P Go failed to switch
to 2G band when 5G disabled.
Fix: Check whether need switch channel for band restriction
first, check go force scc later.
Change-Id: Icf8de51321debea2806585d47d2bd4fc6486075e
CRs-Fixed: 2594279
Firmware sends vdev id allocated for NAN discovery in NAN enable
response. Validate the same and add corresponding entry to
policy manager.
Change-Id: I5e7426c6739620e05480fb90cecdb8ff156fd4cd
CRs-Fixed: 2592021
Add g_prefer_5g_scc_to_dbs to give higher priority for 5g scc than dbs.
It is bitmap per enum policy_mgr_con_mode.
For example in GO+STA(5G) mode, when TPUT is onfigured as wlan system
preference option, If 5G SCC needs higher priority than dbs, set it as
0x8.
This can make GO have higher TPUT given that STA and ref AP mostly have
low speed at this time. This can improve user experience.
Change-Id: Ib8b4bfeef55d97277843df92d3b82aa7f3b9835d
CRs-Fixed: 2587068
When SAP is on 5G and STA connects to 6Ghz AP, the "force
SCC" logic will move SAP to STA home channel if SAP is 6Ghz capable.
If SAP is not 6Ghz capable, SAP will be moved to 2G (DBS) to
avoid MCC(5G+6G) for DBS HW and SAP will stay on 5G for non-DBS HW.
SAP is 6Ghz capable only when all of below statements are true:
a. SAP config includes WPA3 security - SAE,OWE,SuiteB.
b. SAP is configured by ACS range which includes any 6G channel or
configured by 6G Fixed channel.
c. SAP has no legacy clients (client doesn't support 6G band).
legacy client (non 6ghz capable): association request frame has no
6G band global operating Class.
Change-Id: I7e9723fd1b679326a3df61932850589e6e503f3d
CRs-Fixed: 2593569
Fix potential race condition issue when the sap_context
of adapter is null and it is accessed in work queue -
__policy_mgr_check_sta_ap_concurrent_ch_intf.
To acquire/release the "sap_context" by get/put API.
Change-Id: I91dacc6d45c377840f7d30f2f9ff902f53ccd8e8
CRs-Fixed: 2592524
g_pcl_band_priority - Set 5G/6G Channel order
This ini is used to set preference between 5G and 6G channels
during population of PCL.
0 - Prefer 5G channels, 5G channels will be placed before
the 6G channels in PCL.
1 - Prefer 6G channels, 6G channels will be placed before
the 5G chennels in PCL.
The change will only add 6Ghz channel to PCL for SAP or STA
mode.
Change-Id: I51b3073d6f4fb01af72ccb0a50d10822ac115bca
CRs-Fixed: 2590007
When 5G band is disabled by set band, need SAP switch channel
to 2G. When 5G band is enabled again, need SAP switch back to
original 5G channel. When sta connecting, SAP can't switch
channel.
Merge logic of SAP channel switch for band change and for force
scc with sta, both are implemented in:
policy_mgr_check_concurrent_intf_and_restart_sap now.
After sta associate succeed or fail,
policy_mgr_check_concurrent_intf_and_restart_sap is called again
to check and try SAP CSA for band capability change.
Change-Id: I8574209aac3cabb748a8ec05050244f480e1a0e9
CRs-Fixed: 2589021
Reinitialize pcl_weight index in policy_mgr_get_channel_list
for correct connection count.
Change-Id: I96d38f1cb29014517f2c22e360db5d942eb66519
CRs-Fixed: 2589478
If STA is on LTE-coex channel, start SAP on same band, to force
scc, it need select the LTE-coex channel too, or SAP failed to
start.
CRs-Fixed: 2580240
Change-Id: Ib05524711cb2475c3ca5ec7cf61a2b29c05658b6
For SAP/P2P GO on 5G, when receive cmd to disable 5G band when
modem n79 band used, will move to 2G band via CSA.
1. If no active connection on 2G, select ch by safe list, or
channel 6.
2. If there is STA on 2G, force scc with it.
3. If there is SAP/GO on 2G, force scc with it.
4. Handle one race condition that if candidate is already
selected & FW has gone ahead with roaming or about to go ahead
when set_band comes, it will be complicated for FW to stop the
current roaming. Instead, host will check roam sync to make sure
the new AP is on 2G, or disconnect the AP.
5. If 2 SAP on 5G, move both to 2G and keep scc.
When Set band to enable 5G band again, restored all 5G SAP/Go..
Change-Id: I9b2b1ead3b4502022aeefc08359037457bb051f9
CRs-Fixed: 2580204
With this change,in concurrent mode
(SAP on 5g and peer connected + STA Scan ongoing),
active dwell time 2g is not reset to 0.
Change-Id: I20ace5561137a0dd8def497e3bbbbcbeede80ea5
CRs-Fixed: 2572918
At present policy_mgr_check_concurrent_intf_and_restart_sap
will allocate memory for sta_ap_intf_check_work_info for each
work scheduling of sta_ap_intf_check_work. Potential race condition
would be the pm_ctx->sta_ap_intf_check_work_info is overwritten
in other thread context which is calling same function.
It is not necessary to maintain the memory
sta_ap_intf_check_work_info dynamically since only one work
sta_ap_intf_check_work is expected to run at same time.
Move the sta_ap_intf_check_work_info memory allocation to
psoc open handler and free it when psoc close.
Change-Id: I29b2f2528a6d537cb853968153340a75fd5fe88b
CRs-Fixed: 2571624
Currently the 3 port concurrency combinations
which are not PORed should not be allowed to
connect or beacon as it could lead to functional
issues.
Fix is to bloack the 3 port concurrency which are
not PORed.
Change-Id: I792d0484da96fc0ae994fafa2c6b3ac787016815
CRs-Fixed: 2567322
policy_mgr_is_hw_dbs_required_for_band is for any HW where
PHYA/MAC0 doesn't support the given band. We need to switch
to DBS mode to support the band. So far we have
overloaded policy_mgr_is_hw_dbs_2x2_capable to achieve above.
Need a cleaner API to work in a generic way
(for 2x2, 1x1 or any chain mask configuration).
Change-Id: I1cb28bece1242fc749a0a6a56fadca0502850c43
CRs-Fixed: 2565939
The driver does not check the device DBS capability
and the DBS ini compatibility( ch select policy)
If the DBS ini channel_select_logic_conc is disabled
and HW mandates DBS capability then overide the ini
to always keep it enable.
Change-Id: I629fd8661f70b64808a55c4c9bdafa9608787b09
CRs-Fixed: 2551648
The driver does not check the device DBS capability
and the DBS ini compatibility.
If the DBS ini gDualMacFeatureDisable is disabled
and HW mandates DBS capability then overide the ini
to always keep it enable.
Change-Id: I2b31453f9c8a04cef7f943b30d3c28f844c276b5
CRs-Fixed: 2551644
The value 2 is to enable STA+SAP force SCC on DFS channel if STA
is already on DFS channel & also to allow SAP to come up on DFS
channel stand alone & perform CAC (DFS master mode). Set default
value of 2 for g_sta_sap_scc_on_dfs_chan.
Change-Id: Ic1873e1a5b79086aa3e41d3eecea2049b7fc3adf
CRs-Fixed: 2560614
