Move WIN specific structures out of common datapath, WDI_ENUM
into common datapath and remove WIN specific header files inclusion
Change-Id: I8a0d9db4970f3ea9d966337caf178ebce55c28c5
With this feature, using appropriate commands, link layer, network layer,
transport layer and some of the application protocols can be tagged with
the user provided tag values for easier identification of protocols. The
supported protocols today are as follows.
ARP, DHCPv4, DHCPv6, DNS over TCP (v4), DNS over TCP (v6), DNS over UDP
(v4), DNS over UDP (v6), ICMPv4, ICMPv6, TCPv4, TCPv6, UDPv4,
UDPv6, IPv4, IPv6, EAP.
Receive packets are tagged by hardware. Tags are applied after the first
matching rule. Hence it is recommended that the rules are
programmed in such a way that tags are configured from application layer
to data link layer to get expected results.
Change-Id: Ibdc2bd2b78234f482074955e89fb93f05988eaca
FW assigns the pdev_id to lmac_id mapping for each platform(HK, CYP, etc).
This information is passed on to host via WMI_MAC_PHY_CAPABILITIES tlv.
Instead of hard-coding the mapping again in host, use the info sent by FW.
Change-Id: I01ad81e97a1b4aa1f0fea3951f6e8285a0f0c039
Refactor the code to move the serialization of
rx reorder queue setup wmi command to target-if
layer.
CRs-Fixed: 2431099
Change-Id: I6b383f5e875fec55c3586dfee576894f6eb35f73
Support WDI 3.0 SW path intra-bss forwarding. Major
difference for WDI 3.0 is the metadata info passed
from ipa driver in skb->cb[].
Previously intra-bss fwd decision is done by FW and
it passes fw_desc to IPA where IPA driver passes onto
WLAN driver. Now for WDI 3.0, FW is not involved in RX
path and SW path intra-bss fwd decision has to be done
in wlan driver.
Change-Id: Ibc2246620490905fd992a2df31cc6f241cc63592
CRs-Fixed: 2432831
Add a CDP function which processes the peer delete response
and deletes the static ast entry for the peer
Change-Id: Id646979ed07bd82609ca08e7ef3201382d07b1de
CRs-fixed: 2385115
Currently rx reorder queue setup command is sent from soft irq
context. There exists race condition between resume command sent
from worker thread context and this command sent from soft irq
context. In parallel execution on different cpu cores if the wmi
suspend flag is not sent to false as part of resume command at the
time of sending the rx reorder queue setup wmi command, the command
will not be sent. So serialize the rx reorder queue setup command
by posting to scheduler thread.
Change-Id: Ib4d0fb99df142be39d2d35e7f405130c0747efac
CRs-Fixed: 2410175
Delay counters per TID have been implemented for following types:
1. Linux stack to hw enqueue delay
2. HW enqueue delay to tx completion delay
3. TX interframe delay
4. RX interframe delay
5. RX frame delay from ring reap to networking stack
Change-Id: I836596cbd878a43955c18b4981cb5b7b43d4df5e
Add members in the ops framework and the respective
function definitions for supporting 8021pcos to tid mapping.
Change-Id: Iaa15efbda0824cecb1b2db67ea8b6ee585a8d56c
Add support for reset ast entry and table, also send
ast entry type to upper layers in delete callback
Change-Id: I6b420fba5bab50519e8954a1e796b04bc0768ef8
CRs-fixed: 2384550
When IPA using GSI instead of UC different IPA TX and RX
clients needs to be configured. In this change when IPA
uses GSI configure appropriate TX and RX clients/pipes.
Change-Id: I0302323d91f0cc4256a1b08ddbb1345d0daa2939
CRs-Fixed: 2368003
Add CDP APIs for:
a. To get/set rdk stats context into soc
b. To set rdk stats flag into soc
c. To flush rdk stats
Change-Id: I74e35f5fa244d6d38f46a4f64ebbad8a630589bd
Remove dedicated CDP API for mcastenhance 6 AST lookup and replace
the calls with generic APIs
Change-Id: Ic2c5613be57d7eaffc233ee601f136694f81f848
CRs-Fixed: 2369606
check for max_ast entries supported by FW and add the
entry on host accordingly.
Change-Id: Ief70ba631bb41d50c79d3673e3eea0c45b0c1e19
CRs-Fixed: 2355947
Currently there is not STA inactive time support for lithium.
Read inactive_time from htt_peer_stats_cmn_tlv by sending
HTT_DBG_EXT_STATS_PEER_INFO to firmware.
After sending command, wait on completion variable till
firmware to response, trigger completion upon firmware response.
CRs-Fixed: 2319219
Change-Id: I93e6343641ae5c72610a57dd6ba551cca0b010c1
Free the pending dp peers before cp peers in fw recovey case,
to make sure dp peers release all cp peer references they hold.
Change-Id: Ie6c7562e7214f40be895cf8a57a1aa6245d717cb
CRs-fixed: 2383984
Make sure the objmgr_peer is not deleted before
dp peer is deleted, which will avoid the access
of already freed objmgr_peer for connected sta peers.
Change-Id: Ib931dcd0c5650fea5284e9dd53dae9e41f662c56
CRs-Fixed: 2359645
Change the CDP abstraction APIs for ast entry find, add and delete
to avoid external references for ast entry in upper layers
Process the HTT v2 peer map messages which will be enabled for
nexthop ast entries and use these messages instead of WMI event
for HKv1 WAR where we have to wait for delete confirmation from
target event which is processed in control path
Change-Id: Ifa91a259c0762344deb8ab89e868fc5554d75543
CRs-fixed: 2354951
For non-NSS platform, update no of rx packets being
sent from wifi driver to network stack in case of
vow traffic.
Change-Id: If16a5b9c37a16374d4217369b1f02360c62155a9
CRs-Fixed: 2371429
Add cdp api to check if tx desc pool available descriptor
threshold has reached.
Change-Id: Ie542d03dd865d32aa6e01da00328aa51728b4276
CRs-Fixed: 2369218
Packetdump invokes legacy data path API directly without
considering underlying HW:
1. ol_register_packetdump_callback
2. ol_deregister_packetdump_callback
Global pointer pdev_txrx_ctx will be casted to struct ol_txrx_pdev_t
always even Lithium (use struct dp_pdev) underlying, that leads to
struct dp_pdev be overwritten unexpectly.
Wrap with cdp API to avoid.
About packet-dump feature:
It is one debug feature/requirement for Android N, to track/dump
TX/RX data/mgmt. packets during connection. This enhancement can help
in debugging connection related issues.
This change only touches its data packet callback register API.
Change-Id: Ie63fd2dfa909f89741ccf0c5131f6d3305093a3e
CRs-Fixed: 2366334
Add support for GRO functionality for TCP packets.
- Pass GRO config to DP layer as a part of dp_update_config_parameters
- Add API to read the number of active RX contexts from DP layer
cdp_get_num_rx_contexts
- Fill GRO info into skb->cb from rx_tlv during dp_rx_process
CRs-Fixed: 2346995
Change-Id: I1c143d8ce2c7522ba2c76142fb6cc82193df5608
In existing code, 132 bytes of OTA mgmt. and control payload is
provided to upper layers by subscribing to packet header TLV.
The requirement in M-copy mode though is to get complete payload for
mgmt. and ctrl. packets. Add change to configure monitor destination
ring and add mgmt. and ctrl. packet filter to receive full mgmt. and
ctrl. packets.
Change-Id: I0014837b51cac6f0143dcc5cb624ea2086cf4486
CRs-Fixed: 2256159
Pass vdev mac-addr and vdev-mode, instead of vdev-id.
The vdev-id that was passed earlier, was used to get
the mac-addr and vdev-mode from the vdev structure.
But there are cases when this vdev structure may be
freed, when this API is called.
So pass the mac-addr and vdev-mode from the dp structures.
Change-Id: I2148e7ecef433f4363385eeaec2e18f3ec131ab8
CRs-Fixed: 2356315
This FR is to enhance existing pktlog debug tool
This feature will allow to capture pktlog for particular
peer mac address.
Change-Id: I3676095536185f25b0d498e03f70246260a324fd
Avoid memory fragmentation that happens during
attach-detach flow.
- Reuse transmit allocated static pool memory across soc up/down.
These memories are allocated during soc attach.
- Reuse DP source ring memory, DP soc context, DP pdev context
across soc up/down.
- Reorganise structure members of DP soc and DP pdev so that
we can zero out structure members across soc up/down
- Add cdp soc init/deinit and cdp pdev init/deinit that
will be active across soc up/down
Change-Id: I5732453f617bdc16995fda916b645c41845c3ecb
After gerrit#2436786, vdev in monitor mode is removed from vdev
list of pdev. So it is needed to add one more cdp API to get vdev
in monitor mode.
CRs-Fixed: 2343290
Change-Id: I9d74302a464280881ce0cf25dbc8c4f9d8b8d48d
Current HTT_H2T messages from host driver does not have
consistency in message length set by host driver. Some
message types include HTC header length also within the
message length, while other types have message length
itself only, which causes difficulty in handling message
length in FW.
Change-Id: I885a21530a2d8f852387ae54cf7ee0751aad2516
CRs-Fixed: 2345075
Add new flags for MEC and DA enable/disable
and keep it independent of WDS enable flag
Change-Id: Idb49c45ebb34a38f876dbdb293806c4e96d49b5d
CRs-Fixed: 2336332
Add support to configure a specific tid for unicast packets derived from
multicast packets.
Set the user provided tid value when both multicast enhancement and
tid_override_en flag is set.
Change-Id: I770166a37c920a7e642c6649f918456846fb5f90
Acked-by: Shashikala Prabhu <pshashik@codeaurora.org>
CRs-Fixed: 2342717
Add support for parsing AST entries to resolve the RA for
multicast enhancement (mode 6) and enabling access of the API to
the higher layers through the use of the CDP framework.
Change-Id: I909bea86b90c22f311484c0b2653dd7623971c24
CRs-Fixed: 2333014
Replace ol_if interface with WDI for dp stats updation to upper layer.
Define a new CDP API to get radiostats.
CRs-Fixed: 2326789
Change-Id: Ieaee2fe18fc9a0ad0e259e36f59529fe9bc4e208
Support Monitor Mode for QCA6390 as RXDMA1 block is
now removed.
1. Monitor buffers are now received on rxdma_err_dst_ring
2. RXDMA1 monitor status ring is moved to RXDMA0 monitor
status ring
3. Msdu link descriptors are now returned to WBM descriptor
release ring.
4. Reap the Monitor buffers and return it to SW Refill ring.
5. Use the same rx descriptor pool for regular and monitor data.
Change-Id: If41e5d13f942da2b97e5aab72b88ae344925ba67
CRs-Fixed: 2297300
Datapath supposed to be HLOS-agnostic, but there is some use of
Linux fixed-width types u8, u16, and u32. These should be replaced with
C99 fixed-width types uint8_t, uint16_t, and uint32_t so that they will
correctly be HLOS-agnostic and work on non-Linux targets.
CRs-Fixed: 2326406
Change-Id: I8f9099a0170e4f94a54cdd6cc6c2e321a29af717
Add the basic infra for legacy DP CFG items and the APIs to be used from
other components.
Change-Id: Iec1718f0a93fcb91061892b96ae6ae88174df9ee
CRs-Fixed: 2328481
Write a datapath function to compute total PER value and corresponding CDP
interface to get the calculated value.
Change-Id: I1c7feaf48c55689817b83185a4e6d4b8622e51c0
CRs-Fixed: 2308044
With HKv1 WAR to handle DBDC backhaul SON cases a AST
entry for same mac can exist on different radio added
CDP APIs to support the same
Change-Id: I374b8af3fe5e34f62eeb5b09819e331fdeda602a
Introduce INI parameters to fetch feature related values based on target
type and add CDP interface to get dp INI parameters to control path
Change-Id: Id6a3f409106eb7dc01b08a3f1ec00dbe7efc359f
WDS entry should be removed before adding peer with same mac address.
iIn DBDC mode, this can be ensured only by waiting for response for WDS
delete from FW before creating peer. Add logic to defer AUTH until WDS
is removed from FW.
Change-Id: Ie76d08c4817f953504913ae6cc49fc5388169e4a
CRs-Fixed: 2270592
