Currently dwell time is determined by scan policy flags from kernel.
Sometimes when we suspect the scan result is not full enough, we need
to set dwell time by force through ini.
Add ini to decide whether to honour NL80211 scan policy flags, so that
we can disable dwell time changed by scan policy flag from kernel.
Change-Id: Ia0b9f957a7de901513479522e008e4bcbd6b2c0e
CRs-Fixed: 2428630
Currently, there is no attribute to get information for roam reason.
Atrribute QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REASON is added in
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH command to inform
the roam reason. An enum qca_roam_reason is defined for the valid
values of the QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_ROAM_REASON.
Change-Id: I7f51e1c0905840235098600530bb027f6badb76e
CRs-Fixed: 2425898
Add a QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING
to implement beacon reporting feature. Different operations required to
implement this feature can be specified in
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE.
Userspace requests the driver/firmware to periodically report received
Beacon frames whose BSSID matches the current connected BSS's MAC
address. If userspace requests the driver/firmware to send beacon
reports actively, the driver encapsulates the details of the beacon in
an event and sends it to userspace asynchronously. Otherwise, the driver
will only update the beacon in cfg80211 scan cache but will not send any
event to userspace.
If this command is not issued, the current behavior of the
driver/firmware is to update the cfg80211 scan cache only when there is
a scan issued by the host in progress or whenever there is a change in
IEs of the Beacon frames from the current connected BSS.
The userspace requests the driver/firmware to stop reporting beacons
when reporting is not required anymore. If the driver/firmware is not
able to receive Beacon frames because of other Wi-Fi operations such as
off-channel activities, etc., the driver/firmware sends a pause event to
userspace and stops reporting Beacon frames. The driver/firmware
indicates whether the beacon reporting automatically resumes later by
using the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES flag. If
userspace doesn't want the beacon reporting to be resumed automatically,
userspace can send QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP command to
the driver to stop beacon reporting.
Change-Id: Iaefecc744ba07bb573a98fd5e6e4705b16f8d2c8
CRs-Fixed: 2446114
For enhanced repeater independent mode scan request
from wpa_supplicant needs to be set in high priority scan.
Change-Id: I4f95d0e7b2f1d9eb68ed14efd4ee3932ced5af61
CRs-Fixed: 2432916
Currently in the case of concurrent sessions running,
the driver updates the active dwell time for the scan
request to the default value, overwriting the already
filled active dwell time which the DUT got from the
AP as part of RRM request, which results in violation
of protocol.
Fix is to not update the concurrency params if the scan
request is of type RRM.
Change-Id: Ifbb4b45fc111851f544fd39187e4113bda5f7348
CRs-Fixed: 2436893
Currently capability information and RX multicast broadcast
packet count of the connected peer is not getting
cached.
Add support to cache the capability info from assoc request and
RX multicast broadcast packets from FW.
Change-Id: I105e055b1e440852e8e6b508c25e45f79db2d062
CRs-Fixed: 2409521
Currently, the vdev connection status is checked by getting
the bss peer of that vdev, and if the bss peer is in associated
state then vdev connected status is sent as true. It can happen
vdev is present and bss peer is deleted after getting the bss peer
from vdev pointer. Then bss peer can not be dereferenced to get the
its status.
Instead remove all the duplicate api's tdls_is_vdev_connected,
pmo_core_is_vdev_connected, and wlan_vdev_is_connected with
wlan_vdev_is_up. wlan_vdev_is_up gives success status
if associated.
Change-Id: I863c3c0689f329870bd08c813813c16956135209
CRs-Fixed: 2426092
Currently there is no support to send twt capability to
user space.
Add Support to advertise twt capability to user space using
vendor flag QCA_WLAN_VENDOR_FEATURE_TWT when get capability
vendor command is invoked.
Change-Id: I9d6d3dc975485a5d1ad38d4f7c2830b05619a14b
CRs-fixed: 2424356
Per the Linux Kernel coding style, as enforced by the kernel
checkpatch script, pointers should not be explicitly compared to
NULL. Therefore within os_if replace any such comparisons with logical
operations performed on the pointer itself.
Change-Id: I1cf6f897d1d2722d112dd3f802d789652373eaed
CRs-Fixed: 2418254
Customers need to config the coex priority on some scenarios.
qca_vendor_attr_coex_config_three_way will specifies the
vendor coex config attributes. Host will transfer these
attributs by WMI command.
Change-Id: I6aefcfc3ab13cb982e21ca68701b50731f00ca4d
CRs-Fixed: 2410486
Presently, the driver doesnot extract the peer extended2 stats
(rx_bytes, rx_count, fcs_err) that are received from firmware.
Provide the support to extract and populate the peer extended stats2 at
the driver level.
Change-Id: If1f1bb1ef2d1202581744dd509d0da1da718d8c1
CRs-Fixed: 2397638
This subcommand is used to update zigbee state and specified wlan durations
to enhance success ratio of zigbee joining network.
NL attributes qca_mpta_helper_vendor_attr is used to deliver the parameters
to host driver.
Change-Id: I7ec82e11fa3aaea88f20e1c04c464153549bf44c
CRs-Fixed: 2413320
Add nl vendor id and attributes for peer stats cache flush.
Peer rate statistics is per-peer cached data in host driver,
these statistics needs to be flushed to user space on
synchronous/asynchronous events.
This command is used to flush per-peer cached statistics
to application
CRs-Fixed: 2397918
Change-Id: Ie75e11e5949e754dd4779f88f1f6aeb984873f32
Log of level err will call printk to print on uart, may make
current thread sleep or delay > 10ms, then wma_roam_synch_event
need longer time to handle, LFR3 roam need longer time.
Change-Id: Ibdd58f74fcf5cf3de8e2b06166c375a2ce634cb5
CRs-Fixed: 2411278
In wlan_cfg80211_scan(), when "DNBS check fails", mem free of scan req is
done. Mem free of scan req is done again at the label "err" which would
end up in a double free.
Change-Id: Ib757832c1bd54372fba45cbc5ee306d0d7b233b0
CRs-Fixed: 2408703
When user sets the vendor ie for probe request frame, it is not
included in the broadcast probe request sent by FW.
Add support to send vendor ie info in scan start command to FW. Therefore,
FW can include this vendor ie in the broadcast probe request frame.
Change-Id: Ie5fc0c074bd7543568a135d3ef4662bf09b274f6
CRs-Fixed: 2400265
Currently the driver returns EINVAL, instead of EBUSY if
the driver encounters a case of simlutaneuos scan, and
DBS scan is disabled for user space, and thus it may lead
to failure of OBSS scan, which can further lead to SAP
fail.
Fix is to return EBUSY intead of EINVAL, so that hostapd
can try to get the scan module perform a scan, which can
increase the probablity of SAP bringup.
Change-Id: I798e3d1ad0f62a5240603b4344963cb3ee637c13
CRs-Fixed: 2403499
If AP change its status from hidden to broadcasting SSID in its beacon
kernel drop the beacon entry as its confusing. Now during connection
driver try to update the entry in kernel and it fails and as kernel drop
the beacon the connection fails.
To fix this detect if AP changed its ssid type from hidden to
broadcasting and unlink the old bss from kernel in that case.
Change-Id: I10ec42749ebcd2ddea23f7f3a94d862124df156d
CRs-Fixed: 2410430
Update the enum qca_wlan_vendor_attr_offloaded_packets
with the one present in the hostapd's qca-vendor.h
Change-Id: I510d91ab55705f6eed7e676fcda9c469e5c72aca
CRs-Fixed: 2404707
Add new vendor attribute for preferred channels list with weight
value and a flag to indicate how the channels should
be used in p2p negotiation process.
Change-Id: I7b7926bf2aa714be51a8c28e619bbe426d9d2a4c
CRs-Fixed: 2405321
replace kernel version condition in osif_akm_type_crypto_mapping
and osif_cipher_crypto_mapping with ifdef.
Change-Id: I1148bb29c212b82b0a644900b0b77bd6d74bc31f
CRs-Fixed: 2379763
Previously host driver only supports initial SAE and Suite-B
authentication types and roaming to SAE AP is blocked. The
802.11 specification has introduced the Akm suite 00:0F:AC:9 for
FT-SAE and 00:0F:AC:13 for FT Suite-B akm type. Add support for
FT-SAE and FT-Suite-B.
Extend the enum wlan_auth_type to include WLAN_AUTH_TYPE_FT_SAE,
WLAN_AUTH_TYPE_FT_SUITEB_EAP_SHA384. This enum wlan_auth_type is
the new implementation for akm type in converged scan module
corresponding to the legacy eCsrAuthType enum.
Add changes in scan module filter to support FT-SAE and
FT-Suite-B authentication suites be added to filter->auth_type.
csr_scan_get_result() will translate the legacy eCsrAuthType
to wlan_auth_type and push it to the filter->auth_type.
Change-Id: I74d7b0be74d33ced5d3e528032aec6e057a75ff3
CRs-Fixed: 2400683
Add the support to allow user space applications through cfg80211
vendor command to check if wlan firmware is alive or not.
Change-Id: If8346537eea6fe5c4978f6bc973e8d7b420557d9
CRs-Fixed: 2399493
Add API to update cmn vdev mlme structures,
with the addition of new members to the new mlme
vdev structure,new api's are required to update
those members which will be subsequently used the
new mlme target if layer to send commands to the firmware
Change-Id: I9618613c0ad00f78003cd32951b30b631934ba71
Currently there is no support from driver to send STA authorized
event to supplicant.
Use QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES vendor command to
send STA authorized event to supplicant.
Change-Id: I46416949f04dd28a1713cbebf1f7d0e84b5efda2
CRs-Fixed: 2175481
Move all the PNO related structures and CFG items under
compile time flag "FEATURE_WLAN_SCAN_PNO"
Change-Id: I0decb3e0a7cf009ce18ef08eae05734962f6f8c7
CRs-Fixed: 2382997
Currently the driver enques any number of scans it receives
from the NL, or vendor scan path, which can lead to lower
throughputs of the connected profile ( any vdev ), as
antennas would be used by the MAC for scanning, and if
the number of scans are too much, this will lead to a
bad user experience.
Fix is to have a max check of number of scans, and then only
enque a particular scan request.
Change-Id: Iacdb1294ff5e7e20cd30dd328c6ea2b6f7899cda
CRs-Fixed: 2392883
Refactor the following scan related ini items to scan module:
CFG_ENABLE_MAC_ADDR_SPOOFING - ini to enable/disable scan mac
randomization
CFG_SCAN_AGING_TIME - configure scan entries aging time.
Previously these values are populated in hdd and passed to
scan module through ucfg_scan_update_user_config() function.
With new cfg infra, the scan module can directly get these
values from cfg component.
Change-Id: I0dcbd8253ae46387dd44e68c86f0622f279ba501
CRs-Fixed: 2378985
Populate Spectral capability structure with scaling parameters
from extended service ready event parameters. Send the spectral caps
via cf80211 interface.
CRs-Fixed: 2379652
Change-Id: Id0372bdd40843c2101df32d2e71920027a24909f
There are couple of instances in driver where variable sized arrays
are getting used which are giving compilation issues on kernel-4.19.
To resolve this issue, replace static array with dynamic memory
allocation.
Change-Id: Idb12386265d03db5c857039b692a82ccdf227836
CRs-fixed: 2386880
Currently the driver allows simultaneous scan irrespective
of the dual mac feature ini config, which can cause
connect latency.
Fix is to disable the simultaneous scan if the dual
mac config ini is configured to disable DBS scan.
Change-Id: I332284880c04955a8ae2ff19eae10313f240d9ae
CRs-Fixed: 2385027
User layer need to get evm info of each groups of antenna.
Host first get this info by WMI command and then transfer it
to user layer with attribution QCA_WLAN_VENDOR_ATTR_CHAIN_EVM
in netlink.
Change-Id: I66b745b0fd1052b0c75d45376334e5d08d35ae10
CRs-Fixed: 2381139
Acquire wakelock to handle the case where APP's send
scan to connect. If suspend is received during scan, scan will be
aborted and APP will not get scan result and will not connect.
eg if PNO is implemented in framework.
Fix is to avoid the system suspend by taking the wake-lock
during scan. Added INI wake_lock_in_user_scan to control this.
The INI is disabled by default.
Change-Id: I62fdbbcbc6f049cb4e36e774d5a417600a2dfa86
CRs-Fixed: 2381622
In wlan_cfg80211_sched_scan_start() in the case where
wlan_cfg80211_is_chan_ok_for_dnbs() returns failure,
"req" is freed both at the point where the test occurs
as well as at label "error". Since label error provides
centralized cleanup for all of the error cases,
remove the free at the point where the test occurs.
Change-Id: Ibde90c58d76d1db48ee3f12c251be5eaa2b68c7b
CRs-Fixed: 2372789
Refactor the prints for rx management frames. Do not print beacon,
probe resp and probe req frames in txrx module.
Also remove the beacon print from wlan_cfg80211_inform_bss_frame.
Change-Id: I1dbfcec1614b9465d97c010fa4c386f3a1612f5f
CRs-Fixed: 2381796
Define QCA vendor command attributes to configure HE +HTC support and
HE operating mode control transmission.
Change-Id: I6249a23ab0d0b9a82210c749dfd6bd53fb697c51
CRs-Fixed: 2377769
In wlan_cfg80211_scan the number of ssid, ssid length and number of
channels are not checked for max size of array and thus can lead to
Out of bound access of memories.
Fix is to add bound check before copying the params.
Change-Id: Ie6d4e546fb9c884d5988493b611ef7b217f0a95c
CRs-Fixed: 2375217
Add host support for db2dbm RSSI changes. Firmware
indicates this capability when underlying hardware
has RSSI reporting feature. Based on this capability
host will know if firmware sends SNR or RSSI. If no
capablity is present then host will convert SNR to
rssi using a fixed offset of -96. If capability is
present host will directly use the rssi as it is.
Change-Id: I9058f16c6280d466feb96cf88a8a0d8cd7b02032
CRs-Fixed: 2364025
