Current implementation checks for loss of channel equilization
or clock recovery only if the sink sets the link status updated
bit in the DPCD. However, it is possible that the sink can issue
an IRQ HPD to notify a link loss without setting the link status
updated field. Update the implementation to perform a link
maintenance whenever clock recovery or channel equalization is not
ok irrespective of whether the link status updated bit is set.
Change-Id: I2d765236b1e8ddae3c410087406546d0422cdf07
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
Skip link training when in simulation mode considering that we
are not yet implementing tests specific to link training. This
change will reduce the time it takes to power on the panel in
simulation mode, and also reduce the likelihood of failures
caused by unresponsive host machines.
Change-Id: Ie215cafd545bb25b4a033ceae1f275c690e7433d
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Add the altmode communication events in xlog to help
debug the stability issues.
Change-Id: I29d4821a8222e6139187f92b75ec1d05b5ce4939
Signed-off-by: Sankeerth Billakanti <sbillaka@codeaurora.org>
There is a corner case when dp-mst stream is disabled twice:
1. stream 1 is enabled
2. cable plugged out, stream 1 is disabled by kernel
3. cable plugged in, enable stream 0 first
4. disable stream 1
Stream 1 is double disabled and will cause hw crash. This change
will add the check and skip stream_off if already disabled.
Change-Id: Icd1e815a1ed14cd4e784924f3db19b98eb06d571
Signed-off-by: Xiaowen Wu <wxiaowen@codeaurora.org>
Signed-off-by: Sankeerth Billakanti <sbillaka@codeaurora.org>
Don't process any attention requests after hpd off. During automation
tests, scripts are doing a mst unplug after hpd off. But sometimes
disconnect thread freezes waiting for audio ack. During this freeze
unplug happens and uninstalls connector and free the panel and audio
objects due to which lock associated with completion variable causes an
exception.
Change-Id: I4038fd7debc383a96d60906eef17ec6e2163b326
Signed-off-by: Rajat Gupta <rajatgu@codeaurora.org>
usbpd_attention_cb will do dp_display_disconnect_sync, but will
not deinit dp host. usbpd_disconnect_cb can deinit dp host, so
need to check dp state, if dp is unready, should not skip
usbpd_disconnect, can deinit dp host now.
Change-Id: I5a149923ecb043b3a7db973e092bd0d49a715981
Signed-off-by: Zhao, Yuan <yzhao@codeaurora.org>
This change adds more debug logs and event logs to MST callflows
to help with MST stability issues.
Change-Id: I9053eab5932487fccce522cc17ed2e9fb8d887ab
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
Return early if the active streams are not present. Clean function
doesn't take into account the count of active stream which is being
changed during disable and link clk is turned off before that.
Adding active stream check in pre_off will ensures atleast one
stream is on and link clk is not turned off.
Change-Id: I6abf4b14ae4f99161eed3d5300b1961a1983977d
Signed-off-by: Rajat Gupta <rajatgu@codeaurora.org>
Enhance logging in dp mst functions by adding connector ids to
better identify operations for different streams and add more
trace logs.
Change-Id: Iaf5c67105c7af82fc5118674ddde5aef2319a611
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
When resuming the video session from a source initiated power down, the
dp_display driver is doing a link probe again to override the previous
link information parameters. The link_probe is not accurately capturing
all the sink capabilities resulting in the link getting trained at a
different rate when resuming from a PM suspend or a secure display
session. The HBR3 support is indicated in the extended capabilities
DPCD registers which is not considered in the upstream link probe
implementation.
This change will remove the drm_dp_link_probe function from the DP
driver because it is not capturing the accurate DP sink capabilities.
Change-Id: I3c225cf825c826edd73592b18fae74c8b5b8236c
Signed-off-by: Sankeerth Billakanti <sbillaka@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Update the DP controller and PHY programming to support different
values for pre-emp and voltage swing levels at different link rates.
Change-Id: I974c47cd1bf71b76dea4f270031a9cdfe320725e
Signed-off-by: Rajat Gupta <rajatgu@codeaurora.org>
A mode switch on a real monitor can be triggered by forcing the new
mode using debugfs and initiating an hpd_irq. Due to a missing
check for simulator state, the current driver calls the hpd_irq
callback for simulator even for a real monitor. This change adds
this check.
Change-Id: I13480eccd27eac2f9df3dd766d0445c0a5ea9b2c
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
DP MST driver registers bridge callback functions with the DRM framework.
mst_lock is used for synchronization of the mst bridge functions. These
functions call into dp_display where a session lock is obtained for
the display. HPD callbacks, on the other hand, are first handled by
dp_display. During these callbacks, dp_display takes a session lock
first before calling into DP MST driver layer. Currently, the DP MST
layer waits on mst_lock which can result in a deadlock.
This change removes the usage of mst_lock inside hpd callback functions
and just uses the session lock for synchronization.
Change-Id: I7ec338004eef43ac0f1e1f092463e9915cd60684
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
The lock used by the dp debug driver to synchronize the maintenance
and usage of the list of mst connectors is not initialized. This
change adds the missing initialization and deinitialization calls.
Change-Id: I4c24600b47c0b90c256caff45edaea07d082908d
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
The simulation case uses dp_mst_sim_detect_port which
calls the drm detect port function after checking
the mst state. The non simulation case calls the drm
function directly.
This leads to cases in the disconnect path where
connectors are detected while being unregistered.
This solution merges the simulation and non simulation
cases by using the same detect port function, where a
check for mst state is performed before calling the
drm function.
Change-Id: I4a93001131beda54f8146bd50edc036924c94ab1
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
When DRM property objects are created, the DRM framework attaches a
dellocator which can eventually free the object when the last reference
is removed from it. The framework can only do this before the driver is
registered. If a property is created after the registration then the
framework is unable to attach a deallocator causing a memory leak during
tear down.
The current DP driver creates a new colorspace property whenever a
new dp connector is initialized. It creates a base connector at probe
time prior to registration. But then it also creates new connectors,
post registration, whenever a new MST dongle is attached to the
topology, causing memory leaks.
This change limits the property creation to the base connector and
attaches the same object to MST connectors to avoid memory leak.
Change-Id: Ib97dc7aac260b4f3f96c1097f58bd276c68501f8
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
Enable DP controller hardware feature to modulates the
data drain rate between DP and INTF to reduce chances
of MDP Underflow or DP Overflow.
Change-Id: I7214a2fff957ae35b31c660bafa1d0141eb50680
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
When DSC is enabled, dp controller uses the 8bpc data format to
transfer the data irrespective of the actual input bpc to DSC.
Change-Id: I817093e9726d013f0402bfdddfbccec59a900acc
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Correct the peer_usb_comm log message in dp_usbpd sub module.
Change-Id: Iafa49dedcca0d7c8fe84d839a13ed40e69a9552b
Signed-off-by: Sankeerth Billakanti <sbillaka@codeaurora.org>
The debugfs api for mst control is a multi stage process where the
connector id is selected using the mst_con_id node, which is then
used on other commands such as edid_modes_mst for mode switch.
During mode switch control, the mode is set using the current id
for a display and then the switch is initiated through an unplug
and replug. But on an unplug the connector is destroyed and a new
id is assinged for that display on the subsequent plug. This
change detects this scenario and updates the cached connector id
with the id from the newly created connector.
Change-Id: Ib51566ac9e334d4a0b145b6ae549c59c537cb0cd
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
On hpd low signaling, if MST is enabled, then the dp driver should
send the uevent to usermode and wait for the displays to be turned
off before destroying the connectors. In the current mst driver,
hpd low handling is a monolithic step. This change breaks this
into two separate callbacks into the mst driver so the display
driver can wait for usermode completion between these two steps.
When processing hpd low in sim mode, the mst driver uses the drm
framework's the port detection function. When hpd unplug is signaled
to the usermode, it checks the port status before disabling it. But
since the port hasn't been destroyed yet, the framework reports that
the port as still connected. This causes the driver to timeout while
waiting for the the displays to be disabled. This change adds a
wrapper which will report the port status as disconnected when hpd
low is signaled.
Change-Id: I1c59a4878018a300f258bd67c36d1cf4eaf5f67b
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
When hpd disconnect is received, the dp driver sends an uevent to
usermode and waits for the usermode to tear down all external displays
before turning off the dp link. If the wait for uevent completion
times out or exits prematurely due to a race condition with the
connect path, it is possible for the dp link to be turned off
prematurely, with displays still in enabled state. On a subsequent
hpd disconnect, the driver attempts to disable the display causing
this issue since the link has been already turned off.
This change adds a check for display status after uevent handling and
before turning off dp link, to make sure the displays are always
cleaned up before the link is turned off. Any future attempts to
disable from usermode will be ignored.
Change-Id: I404ad90b037fede9c9469a2fd16ca1fbdbd36b7c
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
When dp disconnect is triggered, as part of the teardown process, the
driver sends a notification to audio driver and waits for the audio
driver to complete before proceeding. When back to back disconnects
are triggered currently there is no check if a disconnect is already
in progress. So the driver ends up reinitializing the signal
completion that the previous disconnect thread is waiting on causing
this issue.
This change adds a check at the beginning of disconnect handling and
bail out if a disconnect is already in progress.
Change-Id: I2eaee339408d9dbc120f8efc14d86fca0ebb0758
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
Reset the QMP PHY into DP-only mode only when the adapter/cable
connected is not multi-function capable. We remove the
peer_usb_comm check since this flag is not being updated when
the cable is connected.
Change-Id: Iafbdf73b3ef827b757b51bfadfa6fa16b840ac27
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
MST simulation ports can be removed either through HPD unplug, which
removes all ports on the branch device or through hpd irq, which
removed individual ports. In the current driver, the mst state
on the topology manager is being cleared prematurely. This results
in incorrect port status values being reported when the usermode
queries the status prior to disabling the corresponding displays.
So in its current state, on a HPD unplug, the display is disabled
but the port objects are not cleaned up and new ports are added
on every replug. On hpd irq, not all references are removed on
the port object and also the connectors are prematurely being
removed from the connector list. Additionally, when the last
port is removed, the mst state is cleared on the topology manager,
which destroys the branch device. Once the branch device is
destroyed, the ports cannot be added anymore and this leaves the
MST driver in an invalid state.
This change adds a new helper to remove the port and update the
connector list. It also moves the clearing of mst state to hpd
disconnect callback where the branch device can be safely destroyed.
Change-Id: I3400006a47cc8ab5876809a19b711e3b26be857c
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
When adding a new MST sim port check if the branch device was
destroyed already to avoid dereferencing a null pointer.
Change-Id: I8e6f82c5a6772a9b85d24feca52368da2027e96d
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
Fix the potential NULL pointer dereference in the callback function
for HDCP status updates.
Change-Id: I57ffc480cc6a8f89db0d18151a07876aeeb8c236
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
