User sends wfa test configs to host using vendor command
QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. Host parses the
vendor command and sends wfa test configs to FW using WMI command
i.e. WMI_WFA_CONFIG_CMDID
Change-Id: I5aa0bc8b0a0064828b48368e47d53a5ad5e7ff2f
CRs-Fixed: 2772013
Add cdp ops for IPA Tx buf SMMU-S1 unmapping and
call unmap from ipa_uc_ol_deinit if IPA uc_loaded,
also assert if mapping/unmapping failed.
Change-Id: I79f293fcf5d6f02e3a01d6c8ff829f4ca87e76e8
CRs-Fixed: 2788811
Use uint32 variable to populate he_mcs_12_13_supp from ini
he_mcs_12_13_support.
Previously, uint16 variable was used which was populating
he_mcs_12_13_supp_2g correctly but was disabling
he_mcs_12_13_supp_5g.
Change-Id: I28cd2060799a9f46f79860bdf9a3ede1574c9112
CRs-Fixed: 2789303
Add vdev id in RSO stop commands to make sure that command is sent
for proper vdev. Also add vdev id in all RSO commands logs
Change-Id: Iefa1e8ba177a64e141726ebaef15b250446a0af2
CRs-Fixed: 2789615
Steps to reproduce:
1. AP_AP mode setup, AP1 occupy channel 1, AP2 occupy channel 44.
2. Set channel1~channel11 as unsafe channel, which cause AP1 try to
switch to 5G band.
Observed Results:
AP1 select channel 36, and channel switch fail.
Expected Results:
AP1 select channel 44 same as AP2, and channel switch pass.
Root cause: in Dual AP concurrency case, when get PCL for one AP, need
find the AP from connection list by vdev id and remove it temporarily,
can't just remove 1st vdev from connection list.
Change-Id: I763bbc89bacdad4389084588ee68c3a1e2f17b7b
CRs-Fixed: 2774570
Compiling with gcc 9.3 will cause many implicit-fallthrough
compile errors.
Fix is to add keyword fallthrough to resolve such compile error.
Change-Id: I3fdc48b1a9ab2345a47ae644e3217b4d29238364
CRs-Fixed: 2785172
In order to apply modulated DTIM only on system suspend display off use
case, in RTPM wow mode, for display on and display off, FW will stick to
DTIM 1.
Change-Id: Id282c11c39d38e8a5d55574783d280b092dbb485
CRs-Fixed: 2784872
Add a new ini item enable_mod_dtim_system_suspend to control the
modulated DTIM on system suspend feature.
This ini is used to set modulated DTIM configuration:
Current values of enable_mod_dtim_on_system_suspend:
0 -> Modulated DTIM will be enabled for every wow entry
(RTPM wow + System suspend wow)
1 -> Enable modulated DTIM only for System suspend wow.
For RTPM wow, the device will stay in DTIM 1 (non-modulated DTIM)
Change-Id: Ia3a9d259d8ba1e483ea3e8e7f99f60bbc27c67af
CRs-Fixed: 2787108
After sending disable request to FW, it needs some time to
communicate the frame to all NDP connected peers. Increase
the wait time from 1 second to 4 seconds.
Change-Id: Iae36fe007704600a9f29ac7b943ef22fba91b651
CRs-fixed: 2787069
At present, WAPI security mode STA is not allowed to run in
concurerncy with any other vdev.
So, whenever a new vdev is created, policy_mgr_check_privacy_for_new_conn
is called to check the security concurrency of new connection by checking
security of exisitng vdevs and if a STA vdev with WAPI security exists
then the concurrency is not allowed and the api will return false.
In case, while performing this check, the adaptor associated with
the existing vdev is destroyed, there might be a crash as
hdd_wapi_security_sta_exist is still trying to access the security
of that vdev.
To solve this, use wlan_objmgr_pdev_iterate_obj_list with crypto info
to iterate across all the existing vdev and check the security. If
Wapi security STA exists, it will return an argument with value as true
which will be used in policy_mgr_check_privacy_for_new_conn and it will
return false as concurrency is not allowed
Change-Id: Iff811d2406f1c74cec26d457a2a682dd992710b8
CRs-Fixed: 2784406
When vdev is null in both mlme_get_roam_state() and
mlme_is_roam_invoke_in_progress(), error log is getting printed
redundantly.
Remove prints from both function as there is no additional info.
Change-Id: Ibc96ad957d947857777dad9df9ff766e68562dae
CRs-Fixed: 2785775
In OWE transition mode, the AP advertises one Hidden SSID and one
normal ssid and the OWE capable STA connects to the OWE supported
hidden SSID. When connecting to the hidden SSID, if the AP sends
beacon for the unicast probe request sent by driver before
anouncing join success, then the beacon NULL ssid gets updated to
the kernel. Then after successful association, while indicating
the connection successs to the kernel, the current bss is not
filled as wlan_cfg80211_get_bss() is called with the actual ssid
and not the NULL ssid.
Due to this when supplicant sends install key command for this
bss, kernel returns error and set_key always fails.
Wait for the probe response from the AP for the unicast probe
request sent before announcing join success and drop the beacon
received from the AP so that the driver
fills the proper ssid to the kernel bss entry and same ssid gets
used in association completion handler.
Change-Id: Icded0af5d45d3281ab4304bf166bdc318aa7a942
CRs-Fixed: 2782618
When 2nd SAP is turned on throughput is dropping as
rps is not getting enabled on wifi bridge interface.
A bridge interface is a virtual interface created,
when 2 SAP are turned on else, there is no bridge
interface.
To fix this, Disable IPA when 2nd SAP is turned
on, so that packets are not re-routed through IPA
which is reducing throughput.
Change-Id: I250056338cec0924e97ff79d2d9e6ac513f50d66
CRs-Fixed: 2769539
When we receive disassoc from peer, peer will be deleted from hash
table. If driver again receives one more disassoc from same peer
because of any reason, NULL pointer dereference will occur.
To address this do not use peer to get vdev, use pkt_capture_get_vdev
to get vdev.
CRs-Fixed: 2771670
Change-Id: I5bf7b5edff0e1c6b0b73f0c3849c897b269eef4c
qdf_mem_malloc() function already takes care of logging the
caller function name and line number in case of any allocation error.
Hence there is no need to add the error log again.
Getting rid of these unnecessary logs reduces driver memory footprint.
Change-Id: If0b9425f82f9ed793c7639c0ed09eb1f868b6d5c
CRs-Fixed: 2781932
For STA+P2P GO case, DUT sets operational rates when connecting to AP
as STA, and overwrites it when DUT forming P2P connection as P2P GO.
So, add this change to save operational rates to vdev mlme legacy
object, and avoid to overwrite for other inferfaces.
Change-Id: I2bfbecbc9bc50b8943b1e3de516782e70b125ce2
CRs-Fixed: 2773943
If adapter is changed for a particular vdev and
QDF_IPA_AP_DISCONNECT event was not sent to IPA event
handler when the earlier adapter went down, iface is not
cleaned up.
To fix this, cleaning up the interface when new interface
is being setup for the same vdev and net_dev is not matching.
Change-Id: Icb227df8ef31e9c2c904873559e3b33f05fc03b5
CRs-Fixed: 2777672
Add ini he_mcs_12_13_support which will be used to enable
or disable 4K QAM MCS rates.
This ini can be used to set. MCS 12 and 13 for 2.4Ghz and
5Ghz. First 16 bits(0-15) is for 2.4ghz and next 16 bits
is for 5Ghz. Of 16 bits the higher, first 8 bits represent
BW less than or equal 80Mhz (<= 80Mhz) and higher 8 bits
represent BW greater than 80Mhz (> 80Mhz). nth bit in octet
represents support for nth NSS [n=1:8].
Def value is 0xFFFFFFFF which enable MCS 12 and 13 for all
NSS and BW.
Also, enable 4K QAM MCS only when this ini is enabled and
firmware also supports it.
Change-Id: I8375203735d8b07ef4ff86be2213da127be4e556
CRs-Fixed: 2762230
Change default value of gEnableTDLSSupport, gEnableTDLSScan
and gEnableTDLSImplicitTrigger 1
Change-Id: Ic6559a5f77b1d46bc48647c283327a12c409d873
CRs-Fixed: 2783560
In case two clients try to establish the TDLS connection simultaneously,
the peer who is able to transmit the setup request first will be
connected and the other request is in driver without notifying the peer.
This causes peer to get stuck waiting for the TDLS setup response. So,
send TDLS setup response with unspecified failure reason code, ift here
is already TDLS setup.
Also, drop the setup response only if status code is zero in case setup
is already in progress. This way if the status code is set which will be
set in tdls_activate_add_peer(), in case of request already in process,
the same error code can be notified to the peer.
Change-Id: I83fea4586d6e344a86a9185b078e4d87ec38c664
CRs-Fixed: 2771973
Reduce default value of gMaxLIModulatedDTIM from 10 to 5
to shorten the listen interval. It provides better
connectivity when AP has a large DTIM Period or
Beacon Interval.
Also, move the ini definition to sta header file from
sap header file.
Change-Id: I9661c6fc623949cf8b260043e8da7448b496d57f
CRs-Fixed: 2780070
In the process of rso update config, need to send roam
scan_mode/deauth/idle/trigger commands when rso enabled.
Another fix is to call csr_cm_roam_scan_offload_fill_rso_configs()
with ROAM_SCAN_OFFLOAD_STOP in wlan_cm_roam_fill_stop_req().
Change-Id: Ibcc2ab5d7da1bf838b386e0e1e486cd43072225a
CRs-Fixed: 2779549
While initial connection with SPMK AP1 supplicant generates
PMK1, and DUT updates global mlme single pmk entry and
csr session pmk.
Now DUT roam to non-SPMK AP2 and generates PMK2, Global mlme
single pmk has SPMK AP1 PMK1 and csr_roam_session has non-SPMK
AP2 since FULL SAE happen.
Now Roam back to SPMK AP1, since the Full SAE does not happen
and due to check roam_synch_data->authStatus ==
CSR_ROAM_AUTH_STATUS_AUTHENTICATED in
csr_process_roam_synch_callback(). The lookup and update
csr_roam_session code is not hit and driver don’t update
csr session pmk after roaming to SPMK AP. So after roam sync complete,
csr_check_and_set_sae_single_pmk_cap() updates the global mlme
single pmk with session->psk_pmk. This results DUT uses PMK generated
from a Non-Single PMK supported AP in the ReAssoc Request frame
while Roaming to Single PMK supported AP.
Fix is to allow driver to update session->psk_pmk even in case
Full SAE does not happen.
Change-Id: Ie4f06cfcb066ae245de024b62da586aade783aec
CRs-Fixed: 2761771
As part of WOW feature in WCN6750, send HOST wake up
to FW over QMI instead of WMI. To send HOST wake, add
PLD layer and call platform driver API to send QMI
EXIT_POWER_SAVE to FW.
When FW receive EXIT_POWER_SAVE QMI, it will implicitly
consider that it also received HOST_WAKEUP_FROM_SLEEP
and send ACK for it through CE2.
Change-Id: Ia0a3f4c15662f9ee58649f5c6de965f65aeafe32
CRs-Fixed: 2779370
During probe IPA SMMU S1 enable check will pass only if IPA
registration for ready callback is successful and IPA ready
callback is invoked.
This ensures that IPA APIs are not invoked unless IPA ready
callback is invoked and ipa ready flag is set in the host
driver.
Change-Id: Ie157a2f851bb1e914a098b62ede1280aa0243d19
CRs-Fixed: 2778504
The peer objmgr pointer in the if_mgr_roam module may be NULL if
there is no peer connected. Add check to see if pointer is NULL
before dereferencing it. Also modify logic to only check if the
vdev is in STA or P2P_CLI mode.
Change-Id: I7370ca5b9c74bd81f6e958cf740b6ee426f4faad
CRs-fixed: 2779831
When band mask for connected STA is 7(connected in 6GHz), the weight
of 2.4Ghz channels is sent as 1(weight of non-pcl channels). This
allows firmware to roam to 2.4Ghz AP with dual sta roaming enabled.
For 6Ghz connection, set 2.4Ghz channels weight to 0 to disallow fw
roaming.
Change-Id: I9581c51a827e6fa6ac186b531639ce4835ba0faa
CRs-Fixed: 2775276
Qpower config should not be allowed if Qpower config/OPM power save config
is disabled in ini file.
Change-Id: Iff21159f30731f7188506ab5e5e3133d02203b6b
CRs-Fixed: 2778632
Fix roam scan mode tlv formation for secure connection.
11i tlv is not filled due to wrong akm check in
wmi_fill_rso_tlvs().
Fix the akm check in wmi_fill_rso_tlvs to fill the roam scan mode
tlv properly.
Change-Id: I59ec0e34139ac4a6d6e2bcc03e84ac695292b1f2
CRs-Fixed: 2778658
Currently, gRoamBeaconRssiWeight is not used in HOST or
FW.
Remove unused roam ini param gRoamBeaconRssiWeight.
Change-Id: Ida6ddb8ca5805f819c4d3f7e6ed96c705fa6594f
CRs-Fixed: 2767533
Pass rx data rssi triggers and rx time to firmware.
Add log in wmi to narrow down host and firmware issue.
Change-Id: I255e02ab8f2c88a29619a49d9c2055bdaa75642a
CRs-Fixed: 2768053
In FTM mode do not register callback with IPA driver
to check if IPA is ready.
IPA offload is not supported in FTM mode.
Change-Id: I9d36f3085db72d3ffe9e6080f422618f7a531c01
CRs-Fixed: 2772192
There is customer requirement that once wifi chip overheat,
we should switch the tx chain mask to 1X1 to cool down the
chip instead of halting the tx completely.
Add new INI gThermalMgmtAction to configure thermal mgmt action
with default 0. The valid thermal mgmt action INI value is defined
as enum thermal_mgmt_action_code. To set it to 3 -
THERMAL_MGMT_ACTION_CHAINSCALING to meet customer requirement.
Change-Id: I88b1237fae1f476ad9ff0e7b5a469ec314a42bf9
CRs-Fixed: 2765289
Pointers returned by wlan_ipa_get_iface API and
cds_get_context API are not NULL validated at few
places. Add NULL checks for these pointers to avoid
possible NULL pointer dereference.
Change-Id: I44f226c2ce97afd6ad2ff9cde5cd70d9d12bc3d2
CRs-Fixed: 2775197
To do SMMU unmap for IPA TX and RX doorbell registers, provide
soc handle and pdev id to CDP layer.
Change-Id: I6e4fcc7d96d3dabe9dcbb85b9d7193e898d9a73e
CRs-Fixed: 2768306
FW triggers roaming based on the RSSI score of AP(s) available
after background scan. Currently, the host does not configure
the value of bg_rssi_threshold RSSI. This results in ping-pong
roaming after background scan, even though candidate AP
RSSI is not better than 5dbm than connected AP.
Fix is to configure the value of bg_rssi_threshold via new
INI "bg_rssi_threshold" and configuring default value of
INI as 5dB.
Min: 0
Max: 100
Default: 5
Change-Id: Ib710e294c8b33ff4903d41453e3b55f02daf53ae
CRs-Fixed: 2763962
SAE Public Key (SAE-PK) authentication is an extension of SAE. Host adds
support for SAE-PK APs roam score which host uses to select AP for initial
connection and roaming.
Change-Id: Id8c420950bb8c1d11db5a26aa860e280bcb672d1
CRs-Fixed: 2769372
Move the rssi change vdev params initialization to
csr_neighbor_roam_info_ctx_init() so that vdev priv object will
be created and per vdev parameters are saved and proper values
are sent to firmware.
Change-Id: I87c8272d89f431fa3db60beed4d1da6d9790ec28
CRs-Fixed: 2774826
