Cleanup the struct sCsrNeighborRoamControlInfo and move params in
vdev ext object.
Change-Id: If5a490c68137622838afc831a4da0e1da7fa49c4
CRs-Fixed: 2850991
Add legacy pointer in connection manager context to use for RSO
and other connection manager legacy operations.
Change-Id: Ibc665f53d77aebb3f248fedbdffd1cfe86492b25
CRs-Fixed: 2845980
Add connection manager logic to handle p2p/tdls/policy mgr logics
on connect/disconnect start and complete ext indication. And
add the call to csr to update the legacy structs.
Change-Id: I218a1d193dd62ad041e84078bd2509b82ec11363
CRs-Fixed: 2846663
Problem scenario:
1) Host gets roam event from FW and RSO state is switched to
ROAM_IN_PROGRESS.
2) Host gets reassoc response followed by FW down indication.
3) Host processes reassoc response in HDD and sends disassoc to
FW as FW down indication received.
4) As a part of disassoc host tries to switch RSO state to STOP.
But as present RSO state is ROAM_IN_PROGRESS and FW is down,
host fails to send RSO stop command to FW and doesn't switch
RSO state to STOP.
5) Lim disassoc send fails due to FW is down and host proceeds
with lim_send_disassoc_cnf and lim_cleanup_rx_path.
6) In lim_cleanup_rx_path() host checks for present RSO state is
ROAM_IN_PROGRESS and returns without calling lim_del_sta();
7) Thus peer delete and vdev delete is not send to FW and host
vdev State machine stuck at SP-SUSPEND_DOWN which leads to
peer and vdev reference leaks.
Fix:
Allow switch to RSO stop state while present RSO state is
ROAM_IN_PROGRESS.
Change-Id: I4a838ecd98a7ca377cd557d7a01a93ac53449595
CRs-Fixed: 2844647
To avoid roaming enable failed for operations bitmap set/clear mismatch for
SAP+STA or STA+STA concurrency, clear whole operations bitmap when RSO
deinit, then roaming can be enabled again after STA disconnect and
reconnect.
Add log when set/get operations bitmap to help debug.
Change-Id: Ie1f1a213dcdefb393ec3e1e2c6a8a71ab17b226c
CRs-Fixed: 2834199
The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the roam RSSI TH reset.
This helps in debugging/understanding the scenario when roam
failure happens.
Print the info received related to roam RSSI TH reset into kmsg.
Change-Id: Ibee9fc6e9220511d6679efb24080c79bcd807ab8
CRs-Fixed: 2826321
In case of STA + SAP/GO, Driver fist disable roaming on all
adapters before bss start and enable roaming after start bss
(SAP/GO) in case of failure/success.
Due to commit I4870c69a0e0ca1e8cad734a591f09e402b7a32fa,
Driver fails to re-enable roaming after failure/success
of SAP/GO process.
Fix is to enable roaming after start bss in case of
failure/success.
Change-Id: Ibe90f0685f41984a5841859ea96834f7760ff9a1
CRs-Fixed: 2811306
Rename struct wlan_cm_connect_rsp to wlan_cm_connect_resp for
better readability and to avoid duplication of the structure
and function name as there is already a function with the same
name.
Change-Id: I331365058ed25b902aae11f979512b4edcd3ac06
CRs-Fixed: 2809137
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for cm/wmi roam related files.
Change-Id: Iec350f032c3e037204f560199d4a6e258ac02688
CRs-Fixed: 2810145
Add support for connect and disconnect path
in legacy cld files with respect to connection
manager.
Change-Id: Ia42dd45d943de20d91279c0197b0f17a5c0326eb
CRs-Fixed: 2805807
Host adds support to send enable/disable wfa config for FILS_DISCV_FRAMES
to firmware.
Change-Id: I0143b158b5f62b42c0d4c3d8a34a7ec7b1ec994b
CRs-Fixed: 2801144
To discard 5G candidates based on RSSI threshold, Introduce
a new INI "min_rssi_for_2g_to_5g_roam" to configure the RSSI
for High RSSI Trigger.
Min: -120
Max: 0
Default: -70
Change-Id: If4545296ef1b53d18b8ae4abf12d450f5e690240
CRs-Fixed: 2789017
Compiling connection mgr by gcc 9.3 will cause many implicit-fallthrough
compile errors.
Fix is to add keyword fallthrough to resolve such compile error.
Change-Id: I02fb3ff12d8cea81ce160b3aec1f590faf83a031
CRs-Fixed: 2798881
Currently the roam scan scheme for each trigger is hardcoded to
either full scan or partial scan followed by full scan. Based on
the new requirement for home scenario,the user space configures
roam scan scheme for various triggers. Add support to send scan
scheme type for indvidual roam triggers enabled from userspace.
The default value of roam scan scheme can be modifed for
below roam triggers:
WMI_ROAM_TRIGGER_REASON_PER,WMI_ROAM_TRIGGER_REASON_BMISS,
WMI_ROAM_TRIGGER_REASON_LOW_RSSI,WMI_ROAM_TRIGGER_REASON_BSS_LOAD,
WMI_ROAM_TRIGGER_REASON_BTM
Change-Id: If8b185897b813afc44af362d31172705ea4d7b5c
CRs-Fixed: 2785233
Add support to handle the nl80211 attribute -
QCA_ATTR_ROAM_CONTROL_TRIGGERS_SCAN_SCHEME. Send RSO update to
firmware if roam scan scheme value is received via the nl80211
attribute QCA_ATTR_ROAM_CONTROL_TRIGGERS_SCAN_SCHEME over the
QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD subcommand.
Change-Id: If21281245097648380990b9218a722691279f598
CRs-Fixed: 2785256
When the FILS erp keys are available, the RSN IE is
not included in the assoc request as the function
lim_update_fils_config() returns always if rrk_length is
non zero. Fix this to return only if malloc fails.
Also add additional debugs for RSN IE not included in FILS
authentication frame and remove call to
wlan_cm_update_mlme_fils_connection_info() from
update_profile_fils_info().
Change-Id: I75cc1b04c2fdcbf3e7c55dfac41254a2378233bb
CRs-Fixed: 2789793
User sends wfa test configs to host using vendor command
QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. Host parses the
vendor command and sends wfa test configs to FW using WMI command
i.e. WMI_WFA_CONFIG_CMDID
Change-Id: I5aa0bc8b0a0064828b48368e47d53a5ad5e7ff2f
CRs-Fixed: 2772013
Add vdev id in RSO stop commands to make sure that command is sent
for proper vdev. Also add vdev id in all RSO commands logs
Change-Id: Iefa1e8ba177a64e141726ebaef15b250446a0af2
CRs-Fixed: 2789615
In the process of rso update config, need to send roam
scan_mode/deauth/idle/trigger commands when rso enabled.
Another fix is to call csr_cm_roam_scan_offload_fill_rso_configs()
with ROAM_SCAN_OFFLOAD_STOP in wlan_cm_roam_fill_stop_req().
Change-Id: Ibcc2ab5d7da1bf838b386e0e1e486cd43072225a
CRs-Fixed: 2779549
When band mask for connected STA is 7(connected in 6GHz), the weight
of 2.4Ghz channels is sent as 1(weight of non-pcl channels). This
allows firmware to roam to 2.4Ghz AP with dual sta roaming enabled.
For 6Ghz connection, set 2.4Ghz channels weight to 0 to disallow fw
roaming.
Change-Id: I9581c51a827e6fa6ac186b531639ce4835ba0faa
CRs-Fixed: 2775276
Currently, gRoamBeaconRssiWeight is not used in HOST or
FW.
Remove unused roam ini param gRoamBeaconRssiWeight.
Change-Id: Ida6ddb8ca5805f819c4d3f7e6ed96c705fa6594f
CRs-Fixed: 2767533
FW triggers roaming based on the RSSI score of AP(s) available
after background scan. Currently, the host does not configure
the value of bg_rssi_threshold RSSI. This results in ping-pong
roaming after background scan, even though candidate AP
RSSI is not better than 5dbm than connected AP.
Fix is to configure the value of bg_rssi_threshold via new
INI "bg_rssi_threshold" and configuring default value of
INI as 5dB.
Min: 0
Max: 100
Default: 5
Change-Id: Ib710e294c8b33ff4903d41453e3b55f02daf53ae
CRs-Fixed: 2763962
SAE Public Key (SAE-PK) authentication is an extension of SAE. Host adds
support for SAE-PK APs roam score which host uses to select AP for initial
connection and roaming.
Change-Id: Id8c420950bb8c1d11db5a26aa860e280bcb672d1
CRs-Fixed: 2769372
3 ini:
roam_data_rssi_threshold_triggers
roam_data_rssi_threshold
rx_data_inactivity_time
If there's rx activity during latest rx_data_inactivity_time
and avg of data_rssi is better than roam_data_rssi_threshold, then
suppress roaming triggered by roam_data_rssi_threshold_triggers: low
RSSI or bg scan.
Change-Id: I5b41c4119e61392b50e52ab8ccb8650e5758f3b3
CRs-Fixed: 2768053
Adds support for sme_abort_roaming for ROAM_OFFLOAD_V1.
Also fix compilation error for ROAM_OFFLOAD_V1.
Change-Id: I06247b1118b7dee32ff392b247e2e08e32dbaf9f
CRs-Fixed: 2768397
Add changes to send roam scan mode over RSO start/stop/update_cfg
from connection manager. Update the roaming params and roam scan
params to new structure.
Refine send_roam_scan_offload_mode_cmd_tlv().
Change-Id: I6adce2e8a24ece93a079032d0e66760393fcdccd
CRs-Fixed: 2766023
Fix NULL pointer dereference of mlme_priv while using
the macro GET_CM_ROAM_TX_OPS_FROM_VDEV. Also replace this
macro GET_CM_ROAM_TX_OPS_FROM_VDEV with inline function to comply
with the linux coding style “Generally, inline functions are
preferable to macros resembling functions”
Change-Id: Ifc9ba37e3d260b027ba79457f00382374f3b78ac
CRs-Fixed: 2764891
