Make changes to the legacy code to support the
new SET KEY converged infrastructure.
Change-Id: Ic5359e3a9035ac5f2a937a9a1013fa92764cda9d
CRs-Fixed: 2358795
Remove wepType field from struct tSetStaKeyParams, as
it is an obsolete WEP configuration.
Change-Id: I895541bef0cc08a75ba7c54e792ad15002ff0b0c
CRs-Fixed: 2373003
currently freq is sent as 0 in send auth mgmt frame
request to firmware(WMI_MGMT_TX_SEND_CMDID). In SAP 2G
+ STA doing LFR2 DBS roam from 5G to 2G scenario, the
preauth request get sent in 5g band rather than 2G.
So LFR2 preauth send request should have the exact
frequency parameter. only then FW can send the auth req
in appropriate frequency.
Change-Id: I17f47ee559768fee1fd5055d953791117e7b04c5
RSSI absolute threshold value sent to firmware in the
default case is 0 even when hw db2dbm capability is
enabled which can break firmware roaming.
Fix is to send min rssi value of -128dbm when hw db2dbm
service capability is enabled.
Change-Id: I0a595e9f4af170411a0813a3390ddbb57d26bce1
CRs-Fixed: 2376606
If target doesn't support AES_GMAC BIP cipher,
skip the key install wmi command.
Host will do the BIP MMIE validation.
Change-Id: I7536a0bb8a2dab653eae8f729e57bdcb5fef5e19
CRs-Fixed: 2370637
The following macros are unused, so remove them:
- WMA_DEFAULT_QPOWER_MAX_PSPOLL_BEFORE_WAKE
- WMA_DEFAULT_QPOWER_TX_WAKE_THRESHOLD
Change-Id: I9b0f760ebbadbdecf9549a813a9b72e07a97a9e8
CRs-Fixed: 2375433
Change I654e53fa2441e03723f150d973c124985c67f2b4 ("qcacld-3.0: Add new
params in ACS calc process") introduced macros WMA_CHAN_START_RESP and
WMA_CHAN_END_RESP, but did not add any code which uses them. Since
they are unused, remove them.
Change-Id: I7a5f20cb8e72c19f52d5a44afb3b480eaa84c06b
CRs-Fixed: 2375431
Change I840c6a5f83c6cdc479e6746f36a29c2a7970c964 ("qcacld-3.0: Remove
wma_get_buf_extscan_start_cmd()") removed the only usage of macro
WMA_SCAN_NPROBES_DEFAULT. Since it is now obsolete, remove it.
Change-Id: If4907fcc397ba77bd58d8423b1695896a7197597
CRs-Fixed: 2375430
Change I33b56bb627ac914ca6fe96949de373b015853fc9 ("qcacld-3.0:
Decrease tx drain wait time during del bss") removed the only
usage of macro WMA_TX_Q_RECHECK_TIMER_MAX_WAIT. Since it is
obsolete, remove it.
Change-Id: Iec4ad45efcd7bc407f639226f7aa21ed39d753e9
CRs-Fixed: 2375429
The legacy typedef tBeaconFilterIe is unused, so remove it, along with
the underlying tEidByteInfo typedef.
Change-Id: Id02c67ff49892d63cd2443a2639f4bc7d4253a7f
CRs-Fixed: 2375428
The typedefs for struct sAniProbeRspStruct are unused. Since the Linux
coding style discourages the use of typedefs, remove these so that
they won't possibly be used in the future.
Change-Id: I71965804bd32e3413314e81447ee004e6e663e49
CRs-Fixed: 2375427
The following legacy scan typedefs are obsolete, so remove them:
- tStartScanParams
- tEndScanParams
- tAbortScanParams
Change-Id: Ie106be72b2ff1d1969018d0db14da9408df97747
CRs-Fixed: 2375426
Change Id235d6303ce7c740f907147afc7248d833772067 ("qcacld-3.0:
Cleanup eWNI_SME_SET_BCN_FILTER_REQ") removed the usage of typedef
tBeaconFilterMsg, but didn't actually remove the obsolete typedef,
so remove it now.
Change-Id: Id7a24e18a6aa4fb7cfa6747f264bd3e6eeaa1ad8
CRs-Fixed: 2374845
The enable_mhf_offload and last_mhf_entries_timestamp fields of
t_wma_handle are unused, so remove them.
Change-Id: If07fa52f93caa0c2f2bb191603c6a96830dad469
CRs-Fixed: 2374844
Typedefs tInitScanParams and tFinishScanParams are unused, so remove
them, along with tSirScanEntry and tSirLinkTrafficCheck that is used
just by them.
Change-Id: I5f9c58236f8c5fe639c5b896a66b9dc290e54ab1
CRs-Fixed: 2374281
The txRateFlags field in tSirIbssPeerInfoParams is initialized to zero
but is otherwise unused, so remove it.
Change-Id: I8efcb18869dfe1c5e2a42395bb40c281391b3bfa
CRs-Fixed: 2374278
Add dot11mode related cfg items in mlme cfg, and replace
old WNI dot11 modes with new MLME DOT11 mode enums
Change-Id: I6e866959f440ae781432c8aaa724b229c0874856
CRs-Fixed: 2362540
Refactor the prints for rx management frames. Do not print rx
frames in wma_form_rx_packet, as txrx module take care of it.
Change-Id: I52403c9dd32919507af13782dc838ff8076070cd
CRs-Fixed: 2375675
Change I4fdbf041b53b5f1606d324714f01088742a9307f ("qcacld-3.0:
Modify Kbuild to add new beacon header file") added new file
wmi_unified_bcn_api.c to Kbuild with flag CONFIG_WMI_BCN_OFFLOAD.
Add this flag to all dependent APIs.
Change-Id: Id3f77434179b739d5563b490d25b1c1386e1831f
CRs-Fixed: 2374758
Make sure to initialize global target_if before soc create
as part of this psoc notifications are registered.
Change-Id: Id5491a2aac49450774532fe69ee24e18c9a7c594
CRs-Fixed: 2351426
Per the Linux coding style both mixed-case names and so-called
Hungarian notation are frowned upon, therefore replace the identifier
pAddPeriodicTxPtrnParams everywhere it occurs.
Change-Id: Id15f65781eb6ead662add691aa299df0ca60bc3f
CRs-Fixed: 2371907
In wma_process_add_periodic_tx_ptrn_ind() the buffer allocated for the
WMI parameter will be leaked if wma_find_vdev_by_addr() fails. To
avoid this, reorder the operations so that the buffer is not allocated
unless wma_find_vdev_by_addr() is successful.
Change-Id: Idbd180dcc1bcae5b71f6a56adcfa3b4a7e2595da
CRs-Fixed: 2371905
Add the following new WCNSS_qcom.ini value:
"prefer_roam_score_for_candidate_selection" - choose to sort the
candidates on roam score or preferred AP list send in the BTM
request frame by AP.
When this ini is set, host driver will
modify btm_offload_config bit 7 which will be read by firmware
to get this ini value.
“roam_candidate_validity_timer” - roam cache entries validity
timer. The candidates in the roam cache are valid only for this
time value. This value is sent to firmware over the wmi command
on the structure wmi_roam_offload_tlv_param
"btm_disassoc_timer_threshold" - Disassociation timer threshold
to wait after which the full scan for roaming can be started
after the AP has sent the disassoc imminent
Change-Id: I3ba5ba2182b1b6d722d9c315757332a1b3e62521
CRs-Fixed: 2369018
Add new ini item "bss_load_sample_time" to send the monitor
time window for which the beacons are to be sampled to collect
the bss load information.
Also add changes to send bss load trigger parameters only during
RSO start during initial connection
Change-Id: I61d1f3745b56199838fc886f1ed3a05786653501
CRs-Fixed: 2372147
When firmware receives BTM request with disassoc imminent set,
the firmware should blacklist the AP and should not roam to it
for disassoc timer duration sent in the btm frame. The new wmi
event WMI_ROAM_BLACKLIST_EVENTID received from the firmware
carries the bssid to be blacklisted.
Handle this wmi event WMI_ROAM_BLACKLIST_EVENTID and update the
mac_ctx->roam.rssi_disallow_bssid with the bssid entries
received from firmware.
Change-Id: Ib41bcb91f123ce24b7d28407468e4597af7b5e1a
CRs-Fixed: 2369078
Introduce the following new WCNSS_qcom.ini values:
"enable_bss_load_roam_trigger"
"bss_load_threshold"
Send these values over the new wmi command,
WMI_ROAM_BSS_LOAD_CONFIG_CMDID if "enable_bss_load_roam_trigger"
is set to true.
This wmi command will be sent to firmware as part of the RSO
start or update config.
Change-Id: Ib2e21904bc7b8d87e5f51824d2694b90a3ac53f2
CRs-Fixed: 2367770
The driver currently defines two different data structures to hold
Delete Tspec parameters:
- tDelTsParams
- struct del_ts_param
In this case having two different structures to provide the same
functionality is pointless. Furthermore, due to the way in which these
structures are used, there is an implicit requirement that they be
exactly identical. This approach is very fragile. To align with the
converged software architecture and to improve code maintainability
remove the legacy typedef and exclusively use the unified WMI
structure.
Change-Id: Ia70b1e17e4446259ff32107ffbc11646d078e1c0
CRs-Fixed: 2371915
The driver currently defines two different data structures to hold
Add Tspec parameters:
- tAddTsParams
- struct add_ts_param
In this case having two different structures to provide the same
functionality is pointless. Furthermore, due to the way in which these
structures are used, there is an implicit requirement that they be
exactly identical. This approach is very fragile. To align with the
converged software architecture and to improve code maintainability
remove the legacy typedef and exclusively use the unified WMI
structure.
Change-Id: I298202748b8a0f6c2a9f8a36ca7cdee071d000bf
CRs-Fixed: 2371914
The driver currently defines two different data structures to hold
Delete Tspec Request parameters:
- tSirDeltsReqInfo
- struct delts_req_info
In this case having two different structures to provide the same
functionality is pointless. Furthermore, due to the way in which these
structures are used, there is an implicit requirement that they be
exactly identical. This approach is very fragile. To align with the
converged software architecture and to improve code maintainability
remove the legacy typedef and exclusively use the unified WMI
structure.
Change-Id: I0951c8da636bcbf81a335c0ea1250d721ca5c573
CRs-Fixed: 2371913
The driver currently defines two different data structures to hold
aggregate AddTspec parameters:
- tAggrAddTsParams
- struct aggr_add_ts_param
In this case having two different structures to provide the same
functionality is pointless. Furthermore, due to the way in which these
structures are used, there is an implicit requirement that they be
exactly identical. This approach is very fragile. To align with the
converged software architecture and to improve code maintainability
remove the legacy typedef and exclusively use the unified WMI
structure.
Change-Id: I960bd79b04838ac675ad49e332a47671faccaaa7
CRs-Fixed: 2371912
The driver currently defines two different data structures to hold
a TSpec IE field:
- tSirMacTspecIE
- struct mac_tspec_ie
In this case having two different structures to provide the same
functionality is pointless. Furthermore, due to the way in which these
structures are used, there is an implicit requirement that they be
exactly identical. This approach is very fragile. To align with the
converged software architecture and to improve code maintainability
remove the legacy typedef and exclusively use the unified WMI
structure.
Change-Id: I2e9da1d72dae3c4b0baa13306ee7ec127895a4f2
CRs-Fixed: 2371911
Add host support for db2dbm RSSI changes. Firmware
indicates this capability when underlying hardware
has RSSI reporting feature. Based on this capability
host will know if firmware sends SNR or RSSI. If no
capablity is present then host will convert SNR to
rssi using a fixed offset of -96. If capability is
present host will directly use the rssi as it is.
Change-Id: I9058f16c6280d466feb96cf88a8a0d8cd7b02032
CRs-Fixed: 2364023
In wma_hold_req_timer(), if wma_crash_on_fw_timeout()
is true, SSR will be triggered, but allocated memory
such as user_data, params and resp are not freed,
result in memory leak.
Fix is to still do wma_send_msg_high_priority() when
wma_crash_on_fw_timeout()is true, so allocated memory
can be freed.
Change-Id: I798bb864e8ad6dc7eb67401a820dc0896892e65e
CRs-Fixed: 2370594
The driver currently defines three different data structures to hold
mobility domain information:
- tSirMobilityDomainInfo
- tCsrMobilityDomainInfo
- struct mobility_domain_info
To align with the converged software architecture remove the two
legacy typedefs and exclusively use the unified WMI structure.
Change-Id: I317b90e47c3db8b74a76c297f6bc42301fa2f80e
CRs-Fixed: 2369476
Replace legacy isRoamOffloadEnabled from csr_config with
converged flag lfr3_roaming_offload.
Fix CamelCase issues for roam offload part.
Change-Id: I89ceda876d5549e9b0959e7e25e317c9667594b5
CRs-Fixed: 2367873
After replace CONFIG_MCL with WLAN_FEATURE_ROAM_OFFLOAD in
struct roam_offload_scan_params, roam_offload_params is only
defined under MACRO WLAN_FEATURE_ROAM_OFFLOAD, any access to
roam_offload_params should be under WLAN_FEATURE_ROAM_OFFLOAD.
Refactor function wma_roam_scan_offload_mode, separate roam scan
offload parameters config to another function.
Change-Id: I3b9306ef3c3ad9c451ffb450df9521cde609bca4
CRs-Fixed: 2367841
Change Ib9cdaf7e8aa019002b9fc02d8ffacfcdb28fc121 ("qcacld-3.0:
Remove sme_ipa_uc_stat_request()") removed the last client of
wma_ipa_uc_stat_request(). Since this function is now obsolete,
remove it.
Change-Id: I965ccad2e94246c0d7d57e85c1fa433eeb5c136e
CRs-Fixed: 2371196
Change Ief51bcf611d5d5759fa04e05c0bb4d96e44c7a29 ("qcacld-3.0:
Remove sme_get_wcnss_*_version()") removed the last client of
wma_get_wcnss_software_version(). Since this function is obsolete,
remove it.
Change-Id: Ie3e8fcb48e45deebc750c9886f268d5306a7b705
CRs-Fixed: 2371195
The is_nan_enabled flag in wma_handle_t is written but never read.
Since it is unused, remove it along with the logic that writes it.
Change-Id: I3e7d09ac1ab77427d37a8a45ca5f1612b05c5339
CRs-Fixed: 2370875
The current version of the driver does not have an implementation of
wma_wow_tx_complete(), so remove the obsolete prototype.
Change-Id: Ieb91ebeade812ed4ba4ba25f93a63e4e33cad8ff
CRs-Fixed: 2370020
