Add new ini "monitor_mode_concurrency" to support this feature
and introduce policy manager api's for concurrency checks.
Change-Id: I35ee1fece0a6f9ae8fe340b0598c4a3e20b17e82
CRs-Fixed: 2814523
Add logic to
- Check if connect req freq is 6Ghz and security
is not allowed for 6Ghz, reject connect.
- Ignore 6Ghz APs if connect req security is invalid
for 6Ghz
Also added user config key_mgmt_mask_6ghz mask
to allow specific AKMs, by default all are allowed.
Add added user config check_6Ghz_security to enable
security checks as per spec.
Change-Id: Iada7bb685b272e26cff7e89cf64d181ed6eb48a4
CRs-Fixed: 2820358
Move ini CFG_VENDOR_ROAM_SCORE_ALGORITHM from qcacld-3.0 to qcacmn part.
from qcacld-3.0: mac_ctx->mlme_cfg->roam_scoring
to qcacmn: mlme_psoc_obj->psoc_cfg.score_config.
Change-Id: I318f0d516ce699c061f268116e1cbf79fcc9e23a
CRs-Fixed: 2806090
Memory is created for the mlme legacy pointer during the create
of the mlme legacy priv object. This allocated memory doesn't get
free when an error condition which leads to device crash.
To avoid this problem memory should be freed before returning from
the error condition.
Change-Id: I8aaaf7bf17cf38f70135e5ff00db429c34aff2d8
CRs-Fixed: 2803896
Add support for connect and disconnect path
in legacy cld files with respect to connection
manager.
Change-Id: Ia42dd45d943de20d91279c0197b0f17a5c0326eb
CRs-Fixed: 2805807
INI he_twt_requestor and he_twt_responder should be able to disable/enable
twt requestor and twt responder.
Make them work.
Change-Id: I5e091a2f04cca1817f1a2db6358f141c2eaf103d
CRs-Fixed: 2798800
To discard 5G candidates based on RSSI threshold, Introduce
a new INI "min_rssi_for_2g_to_5g_roam" to configure the RSSI
for High RSSI Trigger.
Min: -120
Max: 0
Default: -70
Change-Id: If4545296ef1b53d18b8ae4abf12d450f5e690240
CRs-Fixed: 2789017
Currently, QCA_SETBAND_AUTO is backwards compatible, so it is set
to include only 2G and 5G bands. Update this to include 6G bands
as well. Also update the band capability INI to have the default
value 0 include 6G bands.
Change-Id: I98067c18e939ff4c1e7b1e778b020b44409b5b34
CRs-fixed: 2799883
Add support to handle the nl80211 attribute -
QCA_ATTR_ROAM_CONTROL_TRIGGERS_SCAN_SCHEME. Send RSO update to
firmware if roam scan scheme value is received via the nl80211
attribute QCA_ATTR_ROAM_CONTROL_TRIGGERS_SCAN_SCHEME over the
QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD subcommand.
Change-Id: If21281245097648380990b9218a722691279f598
CRs-Fixed: 2785256
User sends wfa test configs to host using vendor command
QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. Host parses the
vendor command and sends wfa test configs to FW using WMI command
i.e. WMI_WFA_CONFIG_CMDID
Change-Id: I5aa0bc8b0a0064828b48368e47d53a5ad5e7ff2f
CRs-Fixed: 2772013
Use uint32 variable to populate he_mcs_12_13_supp from ini
he_mcs_12_13_support.
Previously, uint16 variable was used which was populating
he_mcs_12_13_supp_2g correctly but was disabling
he_mcs_12_13_supp_5g.
Change-Id: I28cd2060799a9f46f79860bdf9a3ede1574c9112
CRs-Fixed: 2789303
At present, WAPI security mode STA is not allowed to run in
concurerncy with any other vdev.
So, whenever a new vdev is created, policy_mgr_check_privacy_for_new_conn
is called to check the security concurrency of new connection by checking
security of exisitng vdevs and if a STA vdev with WAPI security exists
then the concurrency is not allowed and the api will return false.
In case, while performing this check, the adaptor associated with
the existing vdev is destroyed, there might be a crash as
hdd_wapi_security_sta_exist is still trying to access the security
of that vdev.
To solve this, use wlan_objmgr_pdev_iterate_obj_list with crypto info
to iterate across all the existing vdev and check the security. If
Wapi security STA exists, it will return an argument with value as true
which will be used in policy_mgr_check_privacy_for_new_conn and it will
return false as concurrency is not allowed
Change-Id: Iff811d2406f1c74cec26d457a2a682dd992710b8
CRs-Fixed: 2784406
When vdev is null in both mlme_get_roam_state() and
mlme_is_roam_invoke_in_progress(), error log is getting printed
redundantly.
Remove prints from both function as there is no additional info.
Change-Id: Ibc96ad957d947857777dad9df9ff766e68562dae
CRs-Fixed: 2785775
qdf_mem_malloc() function already takes care of logging the
caller function name and line number in case of any allocation error.
Hence there is no need to add the error log again.
Getting rid of these unnecessary logs reduces driver memory footprint.
Change-Id: If0b9425f82f9ed793c7639c0ed09eb1f868b6d5c
CRs-Fixed: 2781932
For STA+P2P GO case, DUT sets operational rates when connecting to AP
as STA, and overwrites it when DUT forming P2P connection as P2P GO.
So, add this change to save operational rates to vdev mlme legacy
object, and avoid to overwrite for other inferfaces.
Change-Id: I2bfbecbc9bc50b8943b1e3de516782e70b125ce2
CRs-Fixed: 2773943
Add ini he_mcs_12_13_support which will be used to enable
or disable 4K QAM MCS rates.
This ini can be used to set. MCS 12 and 13 for 2.4Ghz and
5Ghz. First 16 bits(0-15) is for 2.4ghz and next 16 bits
is for 5Ghz. Of 16 bits the higher, first 8 bits represent
BW less than or equal 80Mhz (<= 80Mhz) and higher 8 bits
represent BW greater than 80Mhz (> 80Mhz). nth bit in octet
represents support for nth NSS [n=1:8].
Def value is 0xFFFFFFFF which enable MCS 12 and 13 for all
NSS and BW.
Also, enable 4K QAM MCS only when this ini is enabled and
firmware also supports it.
Change-Id: I8375203735d8b07ef4ff86be2213da127be4e556
CRs-Fixed: 2762230
Currently, gRoamBeaconRssiWeight is not used in HOST or
FW.
Remove unused roam ini param gRoamBeaconRssiWeight.
Change-Id: Ida6ddb8ca5805f819c4d3f7e6ed96c705fa6594f
CRs-Fixed: 2767533
FW triggers roaming based on the RSSI score of AP(s) available
after background scan. Currently, the host does not configure
the value of bg_rssi_threshold RSSI. This results in ping-pong
roaming after background scan, even though candidate AP
RSSI is not better than 5dbm than connected AP.
Fix is to configure the value of bg_rssi_threshold via new
INI "bg_rssi_threshold" and configuring default value of
INI as 5dB.
Min: 0
Max: 100
Default: 5
Change-Id: Ib710e294c8b33ff4903d41453e3b55f02daf53ae
CRs-Fixed: 2763962
Add checks in caller APIs to handle negative return value from
crypto get param and crypto get peer param APIs.
Change-Id: Ibb138971f347c7ccdacbc93aa38521d5d9536759
CRs-Fixed: 2775328
3 ini:
roam_data_rssi_threshold_triggers
roam_data_rssi_threshold
rx_data_inactivity_time
If there's rx activity during latest rx_data_inactivity_time
and avg of data_rssi is better than roam_data_rssi_threshold, then
suppress roaming triggered by roam_data_rssi_threshold_triggers: low
RSSI or bg scan.
Change-Id: I5b41c4119e61392b50e52ab8ccb8650e5758f3b3
CRs-Fixed: 2768053
Currently INI: gFirstScanBucketThreshold is not used
while LFR2/LFR3 roaming.
Remove unused INI gFirstScanBucketThreshold
Change-Id: Ifa909fc57d3ac3da696369fcffc390826f393b44
CRs-Fixed: 2767372
Add changes to send roam scan mode over RSO start/stop/update_cfg
from connection manager. Update the roaming params and roam scan
params to new structure.
Refine send_roam_scan_offload_mode_cmd_tlv().
Change-Id: I6adce2e8a24ece93a079032d0e66760393fcdccd
CRs-Fixed: 2766023
In some instances, AP does not respond to probe req
causing join timeout at STA and no connection.
To solve this,send multiple probe requests(every 200ms)
to AP until join failure timeout(1 sec) expiry,
if single bssid case retry same bss again
(configurable via ini, max allowed tries 2).
Change-Id: I7a7eeedcc24db1a74cd186ff957c638a39cdea6d
CRs-Fixed: 2763815
Currently the driver enables the SRD channels
support for both P2P_GO and SAP if the SRD master
mode is enabled.
Have individual ini values to enable/disable
the SRD channel for each op-mode as required.
Change-Id: If6e66996ed19dacbde7f71a6702f378a7e9a273c
CRs-Fixed: 2748446
The ini ratemask_type and ratemask_set can be used to limit
the maximum phy rate. The ratemask_type is used to select
the phy mode and the ratemask_set to select desired NSS and MCS.
It can be used to optimize link performance.
Change-Id: Ia5c9f3a80eb93710bdcf53dabc4a45e554753b01
CRs-Fixed: 2758859
Add user configuration support to configure dot11 modes for
different vdev types.
Change-Id: I338d9d76f000195d1798bbc8b3b7ff1fb33ee305
CRs-Fixed: 2760240
If join fail reason is timeout, retry sending join req
after timer expiry, timer value can be configured
via join_failure_retry_interval.
Change-Id: If90071b3f6d7f48936db6f7088c3c1547e48b294
CRs-Fixed: 2760236
Add changes to define structure to hold the WMI_ROAM_SCAN_MODE
command related parameters.
Also added minor cleanup changes.
Change-Id: I24ef18e05de8dd05ee437e440651ea9ab0731e46
CRs-Fixed: 2758316
Add support to retry the deauth frame if the Tx is not success if
user configured the retry count.
Change-Id: Id128b4a70a276ee86270372ff7954e40bde8123c
CRs-Fixed: 2754305
Host sends the WLAN_MSG_WLAN_STATUS_IND to WiFi Location Service(WLS) via
cnss daemon which includes supported channels. WLS service is yet not 6GHz
capable. Hence to limit the 2.4GHz/5GHz channels only in
WLAN_MSG_WLAN_STATUS_IND introduce new INI "wls_6ghz_capable".
Change-Id: I77b284d2025601fec72aa35d430f18865f15f247
CRs-Fixed: 2748489
Currently driver sets the NOL state of the channels to false
on every regulatory updated, which indicates the channel is
not in NOL. Which may lead to some issues where the channel
is actually in NOL but host treats it as non-NOL channel.
Ideally NOL list should be maintained throughout the driver
lifetime and across the regulatory changes.
To address this issue add a logic to not update the NOL state
of the channels whenever the regulatory update is received.
CRs-Fixed: 2744916
Change-Id: If96b22ab29a60a2aa752bbf01aaae46fc37362eb
Add connection manager changes to send roam scan offload init
deinit. Add new enum roam_offload_init_flags to fill the roam
init/deinit flags, 4-way handshake offload, bmiss skip full scan
flags at connection manager instead of getting the ini and filling
at target if.
Change-Id: I558e868efd341b508d3df76c8d6ab90eac512432
CRs-Fixed: 2745585
In current implementation, vdev create command is sent to the FW from
vdevmgr_mlme_ext_post_hdl_create. By design vdev create command should
be sent to the firmware from vdevmgr_mlme_ext_hdl_create.
To align with the design, send vdev create command from
vdevmgr_mlme_ext_hdl_create.
Change-Id: I42203ae5c4f75388e520e7fc3bd9114dd3236492
CRs-Fixed: 2714533
Check the required security types allowed for 6GHz connection and
do not allow the connection if the secutiry check fails.
Change-Id: Ic680c4600b3f17151e42f8708ff8810e5d16e52e
CRs-Fixed: 2715086
Add new channel 177 to wiphy struct ieee80211_channel
hdd_etsi13_srd_ch and rename the struct to
hdd_5dot9_ghz_ch.
Add a new ini fcc_5dot9_ghz_chan_in_master_mode to
enable/disable new 5.9 GHz channels 169, 173 and 177
in master mode.
Change-Id: I68dc3be18277ca0e416a579327f406279458899e
CRs-Fixed: 2693707
The band_capability field is used in other places to be
a bitmap over reg_wifi_band. Update the field in wma_tgt_cfg and
wlan_mlme_generic to take the same bitmap for consistency.
Update all references to these fields to expect a bitmap as well.
Change-Id: I8abd697e2fbe02b4eadd32f3027bef7408bac2a0
CRs-fixed: 2726710
Introduce new INI sae_connect_retries to decide auth (initial connect
and roam auth) and connect retry for sae. MAX reties is capped to 2
and max for roam auth is 1.
Default is 0x49 i.e. 1 retry each.
Bits Retry Type
BIT[0:2] AUTH retries
BIT[3:5] Connection reties
BIT[6:8] ROAM AUTH retries
Change-Id: Idae86a7bdb32244c7f3a140b8591418b8238758a
CRs-Fixed: 2728458
Currently, function mlme_is_freq_present_in_list calculates
index based on chanel frequency in a loop of num_freq.
But acs_weight array can hold NUM_CHANNELS number of values.
loop index more than NUM_CHANNELS may lead to OOB read issue.
Fix is to add a validation for loop index < NUM_CHANNELS to
avoid any OOB issue.
Change-Id: I3c1d3393cd2a40147c325fea8f76b1db1a51f457
CRs-Fixed: 2727312
Rename the existing roam offload states to include
WLAN_ prefix. Add 2 new states:
WLAN_ROAMING_IN_PROG - Roaming has started at firmware, this is
after candidate selection at firmware.
WLAN_ROAM_SYNCH_IN_PROG - State after handoff is complete at
firmware.
Also move the roam_offload_state enum to connection manager.
Change-Id: Ib1f38d200393849253893113172cdfc69e381fb3
CRs-Fixed: 2725387
Send Vdev pcl command on both connected STA vdev when sta+sta
roaming is enabled. Handle below cases:
1. When 1st STA is connected send PDEV pcl command for the
first sta. Set pcl_vdev_cmd_active false.
2. When 2nd STA comes up, Set pcl_vdev_cmd_active to true,
send vdev PCL for 1st sta before enabling roaming(disabled
as part of the connect on 2nd STA).
3. For second STA force dbs connection when
enable_dual_sta_roam_offload ini is enabled. Set the channels
of the 1st connected STA band as invalid and remove these
channels from the scan filter.
4. On disconnection of 2nd STA connection, clear the vdev
PCL sent for 1st STA and then send PDEV pcl command.
Also make changes to send set PCL command after roam init
is done before RSO start is done at firmware to avoid assert.
Post set pcl command from sme/csr through lim/wma/wmi to avoid
the above condition.
Disable roaming on the vdev before sending set PCL command to
avoid roaming on undesirable band & channels.
Change-Id: I6bd869015b7248fe5c5c90b6e2fa0174995be197
CRs-Fixed: 2725360
Enable compilation of the connection manager roam files with
Kbuild changes.
Add new API to store and retrieve the firmware scan channels at
mlme. Also add initial support to post SET_PCL command through
lim, so that it is not sent before ROAM init command.
Add changes to restrict connection of the 2nd STA to
channels on the other band of the 1st STA connected band.
This is done by filling only the allowed band channels in
the scan filters for the 2nd STA connection. If only
1 STA is active, it is allowed to connect on any band.
Add header gaurds for missed header files:
wlan_cm_tgt_if_tx_api.h
target_if_cm_roam_offload.h
Change-Id: Id2bce12b9663ed635ea46164169b088461aab870
CRs-Fixed: 2720341
