IPA Tx buffers are allocated using qdf_mem_alloc_consistent,
so free using qdf_mem_free_consistent.
Change-Id: I0125189e1eec2a45f06bc7c2662d65c8745b3d3e
CRs-Fixed: 2135803
Due to a HW issue, msdu count received in REO entrance descriptor
could be wrong in case of some error packets received on RXDMA2SW
ring. Instead we should rely on Rx MSDU link descriptor entries
being non-null to pop MSDUs.
Change-Id: I1f4344752bdca13e9502aab79ee648b9b075d2e9
Replenish buffers in RXDMA refill ring based on low threshold
interrupts in addition to regular Rx processing. Also increased
RXDMA refill ring size to 4096.
Change-Id: If1f4592c815fe2404c4952a96b721cb6d4fdfcd0
In the DMA descriptor reap code, the check for NAPI quota is after
Tail pointer is updated. This is causing a descriptor leak in high load
conditions when loop is exited without processing the reaped descriptor.
This change moves the quota check to end of while loop.
Change-Id: I2f3432bf257947f85abc2216a0f2dfc44813c44c
CRs-Fixed: 2137017
num_msdu, qos and ppdu_type were being parsed incorrectly.
Parse them appropriately.
Change-Id: I665285bc0b628fd1d9459473d18ef62577bbd54e
CRs-Fixed: 2133732
Private ioctls for external acs operation like
set icm active, get channel load info, clear chan load info,
get nominal noise floor were transported and
handled by spectral module. We seperate this ioctls
from spectral by adding new IWPRIVs(get_icm_active,
set_icm_active, get_nominal_nf, clear_chan_info)and
moving their handlers out of spectral.
CRs-Fixed: 2126313
Change-Id: I8c6b56b85d566f5bc7f6217f6fbc99fa23171cdd
Currently there is no support for management MGMT TXRX
component over HTT endpoint and supports only over WMI.
As a result for platforms which does not support MGMT
over WMI will break other components which uses MGMT TXRX
component to send mgmt packets.
In this change implement changes to support MGMT TXRX
component over HTT.
Change-Id: I487aca3893aa21905a744e2e5dc7104e6c414fdc
CRs-Fixed: 2097694
There is issue on receive RAW( Not Decap) long packet
that cross one skb in monitor mode. This issue is seen
to capture AMSDU/AMPDU packet that is use more than
on SKB.
Change-Id: Ic50b316818925b1d327634abc103430d8dde9f36
Remove buffer allocation for holding amsdu llc header. The
next amsdu llc header is copied to the end of previous msdu
skb buffer.
Check if monitor vdev pointer is NULL on packet delivery
on monitor mode to avoid crash.
Change-Id: I61dc53900c34f34d8dccb2e8b71cbdf5e005f61e
Provide an API to accept the config parameters
from the upper layer and store them in wlan_cfg_ctx.
Enable/Disable the datapath features based on these
parameters.
Change-Id: Icbdc835a51a6fea87c06174e9fc63d5d007aec1d
CRs-Fixed: 2097229
Add support to send MSDU, mgmt. and ctrl payload along with metadata
to upper layer callback
FR 42132
Change-Id: Ie751322c7c15419ea908538e9e8687b64693fcfa
CRs-Fixed:2068486
add support to return msdu link descriptors received on rxDMA error ring
to wbm release ring without freeing the nbufs (msdus).
Change-Id: Ic12c3f0531a639b61d3d77cee6266ce595e4d1c9
Update of per-peer statistics was disabled from per-MSDU indications
as they are now updated from per-PPDU indications. However, the data from
per-PPDU indications is incorrect for some fields. Re-enable update of
statistics for per-MSDU completions till this issue is fixed in FW
Change-Id: I2983ef9244a6f95104ba49ab6d1c6543a951d0b2
CRs-Fixed: 2128230
Add a check in mec handler to see if mac_address is same as that of
vdev_macaddr.raw. If both mac addresses are equal, then add_wds_entry should
not be called. This corner case is seen in qwrap mode where the vdev address
is same as that of the backend wired station
Change-Id: I17504de8ef379680c2a2b962280e1853a5b2930d
CRs-fixed: 2109554
Added logic to reset the host interrupt mask bits for
NSS offloaded rings (WBM Tx completion ring and REO Destination ring)
Change-Id: I96ae29051b6294647cf0610d3cda6c2a995f77a8
CRs-fixed: 2121607
for cases where hash is invalid (non TCP/UDP) let us remap
the traffic to a configured REO DESTINATION ring instead of
using default ring 0.
Change-Id: I3d08f684f1914b60a2457bdcc5c184fc8a0068e7
Packet log messages be coming as HTT messages for Lithium. Temporary
change to bypass HTC connection for this new HIF pipe (CE 5), which
will be used for packet log and other high-priority HTT messsages.
Proper HTC connection to be added later once required FW changes
are available
Change-Id: I53361b4c28b838dacf62f435cc12051bb2eb65b6
Parse PPDU TLVs provided by FW which are required to
capture TX data path stats
Change-Id: If91834aa94ff8893ba1f292d801f2c00ecdaea1f
CRs-Fixed: 2104488
1. Define bitmap array appropriately and expand ppdu per user
tx stats array to accomodate upto 8 users stats
2. Fix issue where even with 1 WLAN STA user_index was exceeding zero
3. Allocate 5 bits for ppdu_type variable
Change-Id: I969c929c3e16d4027a5e642a0a9195979c95e9cc
CRs-Fixed: 2121122
Redo some of the LMAC interrupt mapping changes made in
Iec8e9f4a02cd618a3b244cfd6fc7ead1e7d993c3, which were lost
due to a recent change made to support MSI.
Change-Id: Ic566e7285feaeb9058defe01c5e704be3135ed2d
CRs-Fixed: 2113818
There are many QDF APIs require a qdf_handle_t parameter. None of these
APIs actually use the qdf_handle_t parameter, meaning it can be
completely removed. As a step toward globally removing this unused
type, remove qdf_handle_t parameters from unsed qdf_defer APIs.
Change-Id: I0568aa7cbd430abc0d046143482a067d96bf6313
CRs-Fixed: 2112646
Enable reaping of HAL PPDU Status ring when ol stats are enabled.
Added peer mac address and first_data_seqcntl fields into CDP Rx PPDU_stats
structure. Added support to disable printing of per packet stats through
iwpriv command.
Change-Id: If0f967676e867c7ba9870770c3c818cbea43461a
Add a check to prevent access to a uninitialized lock.
This occurs on the failure path of pdev attach.
Change-Id: I8be9d7c97095a3ba96b6d1a8599ee2412eb8f5d6
CRs-Fixed: 2099448
Initialize pdev_id for PDEV stats request and response event.
Add param to set pdev stats request timer.
Change-Id: I11f648070cd39f026129d1cf3aa13bf296d25e6e
Remove Tx flow control parameters from being
printed in multiple dumpStats statistics.
Change-Id: I2704c2b0a53bb08c16bdd8d61fb4dac21cfcfc31
CRs-Fixed: 2097229
Provide an API to accept the config parameters
from the upper layer and store them in wlan_cfg_ctx.
Enable/Disable the datapath features based on these
parameters.
Change-Id: I9336cac686bfb875cea242685a122ec98acdf8c2
CRs-Fixed: 2097229
Add feature to obtain position of head and tail pointer of all rings.
Change code to include 'iwpriv athx txrx_stats 263' that gives the entries
pointed to by head and tail pointer.
Change-Id: Ib125db8982362c50a415058fd29f07f326991a50
CRs-fixed: 2098806
ARP packets will not get chance to be transmitted if
netif queues are paused due to low tx descriptor availability.
Send ARP packets from HI PRIO queue so that it can be transmitted
in noisy environment.
Add netif action type for HI PRIO queue.
Change-Id: If3fea405bed07823f11b505f9a6627a3f14c343a
CRs-Fixed: 2083277
Add CDP API to set ptp rx opt. This rx opt is
needed for determining whether to time stamp
the received MSDUs or not.
Change-Id: Ia7cfbe838ff62ef0775164f542a160bf93e44a74
CRs-Fixed: 2095956
Remove the NAPI quota check on processing monitor destination
ring. The quota is applied to monitor status ring process.
change Dummy TLV in status ring handling. The Dummy TLV
is not an indication of PPDU done.
Remove the mpdu err check in MPDU pop function.
Increase Monitor buffer ring, monitor destination ring
and monitor descriptor ring size.
Push destination ring buffer to stack when ppdu id from
status ring is bigger than ppdu id from destination ring.
Change-Id: If592a89ad132d405ab215024c8198a020153a9ff
