Add force flag support for PTQM migration.
This flag will be used to allow migration to vdevs which are not
allowed to be selected as primary by using the ini config.
This will be helpful in scenarios where if the current primary link is
going down and peer ptqm needs to be migrated but the partner links of
that mld are the user disabled links for ptqm.
Also add skip_pumac_cnt to mark a link to be skipped from being selected
as new primary
Change-Id: Ia8c7881f37d32211a732c5c7394c4a608099b62a
CRs-Fixed: 3548552
The current implementation of the crypto module utilizes
the vdev object for saving and retrieving crypto keys.
However, there is a need to store keys for individual
links in the n-link MLO. To address this requirement,
a proposal has been made to leverage the hashing
framework and store/retrieve keys from the PSoC level.
The change involves leveraging the hashing framework
to save and retrieve keys from the PSoC level.
Change-Id: I9c93545869b0c1d42b2c0e31bc672aa78573be2a
CRs-Fixed: 3549390
This change incorporates support for the hashing framework,
enabling key storage for individual links in the n-link MLO.
The implementation includes the addition of new APIs
specifically designed to accommodate the crypto hashing
framework.
Change-Id: I9305c4a71b8970a8a6037d6d80f11c6139a77bd8
CRs-Fixed: 3498849
SOC ID is missing for WCN6750_V2 and as a result correct
string for chip is not sent to CNE. This leads to the
issue in Wifi calls.
Add the SOC ID for WCN6750_V2.
CRs-Fixed: 3552566
Change-Id: I80d19742f6ffa1c5b03f1f2576c6e4c0c4a1c1db
Currently host driver doesn't consider SP channels for scan.
So if any country supports only SP power type then STA is not
able to scan and connect to the AP which is operating on
SP channel.
To address this issue enable passive scanning for SP only
channels and add logic to prevent turning up SAP on these
channels.
Change-Id: Ieb14ded41c67e23e066c8a0a5c5e450975d8c4c2
CRs-Fixed: 3529200
Zero memory of mlo_link_set_active_resp struct in event handler to
avoid invalid value in it.
Change-Id: I18cbe0903bea23c9069a84af8207f4265a7111e1
CRs-Fixed: 3558678
Currently, util_parse_pamlie_perstaprofile_stactrl checks
whether both EDCA and MU EDCA are included in the EPCS
response frame. Per the 11be_D3.1, the STA Profile subfield
optionally contains EDCA and MU EDCA parameters, so remove
the check to address IOT issue.
Change-Id: Ic1f7d4dbb951d9605b7cd7f0f1970895328183f6
CRs-Fixed: 3557340
For legacy tx monitor, we need msdu completion in sequence.
Modifying the return buffer manager id during enqueue will serialize
the msdu completion.
Return buffer manager will be over ride only when tx_monitor
is turned enabled.
Change-Id: I500065077b59b3ea3561ec8fc49af8cbe58c1dfe
CRs-Fixed: 3539636
Add new file wlan_mlo_mgr_link_switch.h and .c
which contains MLO manager public file containing
link switch functionality.
Change-Id: I2bce76e7de09a1c9ba4a4cdd83855db41166739b
CRs-Fixed: 3530571
In current scenario osif_cm_free_connect_req() and mlo_free_connect_ies()
used to free up connect request and its sub memory.
Similarly cm_free_connect_req() and cm_free_connect_req_param() also
free up the connect request and its sub memory.
So replace osif_cm_free_connect_req() with ucfg_cm_free_connect_req(),
mlo_free_connect_ies() and qdf_mem_free() with wlan_cm_free_connect_req()
and mlo_free_connect_ies() with wlan_cm_free_connect_req_param().
Change-Id: Ie62603652dd77ae5ae9f7b7085d4b9bb257eaf53
CRs-Fixed: 3554234
In PTQM migration WMI command, multiple peer entries can be sent.
If the number of entries are more than WMI buffer size limit, then
multiple WMI commands are sent. If there are some WMI PTQM cmd sent
successfully followed by a failure, reset peer flags only the failed
entries instead of all the entries
Change-Id: I1031f1ac700e05e651a2488827cb6b6cda195bac
CRs-Fixed: 3556179
Currently host driver enables 11d on different available vdev before it
sends the vdev delete command to the FW. Since 11d is already enabled
on existing vdev, FW, do not enable the 11d on this command on
different vdev.
For example in current issue, when host driver creates vdev0, it
enables 11d on vdev0. Now it creates vdev1. when host drivers tries
to delete vdev0, it sends 11d start command on vdev1 before it sends
vdev delete for vdev0. Since 11d is already enabled on vdev0, fw do
not enable 11d on vdev1. Now host driver deletes vdev0.
Since FW rejects 11d start on vdev1, 11d algorithm does not run
after vdev0 deletion.
To fix this issue, enable 11d on different vdev, once host deletes
the current 11d vdev.
Change-Id: I496f17bd0d1baacdb5e74609c1b5894af4256e12
CRs-Fixed: 3515089
The data type of pending_action in 'struct dp_soc_umac_reset_ctx' is
'enum umac_reset_rx_event'. We assign the value of 'enum umac_reset_action'
to pending_action.
Hence, replace 'enum umac_reset_rx_event' with 'enum umac_reset_action' for
pending_action.
Change-Id: I3505648827ac6de5ce1c93a21b76c58942fc1f50
CRs-Fixed: 3550309
To eliminate the use of AST, using net dev to
find the peer related information, which helps
in avoiding the iterations of psoc list.
Passing the peer id as addition parameter to DP
Change-Id: I68e4ad8d5d62b2350ed0c2df66279de3fa9c0d83
CRs-Fixed: 3526799
Add INI to disable AST indication. AST disable flag will be
sent to the target in resource config.
Change-Id: If30cac010681faf06bbcaa2d492d6843e3e675d0
CRs-Fixed: 3544223
Use page frag init time rx buffer allocation for efficient usage of memory.
Add ini dp_bufs_page_frag_allocs to disable and revert to original slab
nbuf allocations.
Change-Id: Iac78895addfe9da0118bc071c691a26216d6fda1
CRs-Fixed: 3553800
Due to limitation uCode always filling SGI as long for VHT mode in
rx_msdu_start_tlv.
This change is to extract VHT Rx data packet SGI from
WMI_VDEV_SMART_MONITOR_EVENTID.
Change-Id: I5fcdc463ea2a6d83253e39cc377a2471aeb4e122
CRs-Fixed: 3477303
Gracefully handle the scenario where the packet counter
of the current management frame is less than or equal to
the packet counter of the last management frame received
in the same link.
CRs-Fixed: 3525902
Change-Id: Iba7d2bd55fd8e969486439ef87a81c489658707c
Define and initialize new WMIs for v2 ATF.
Rename send_set_atf_cmd to send_atf_peer_list_cmd which
is more appropriate.
Change-Id: Icab17703a4ccea8e2b859bf6a18387fbd2234226
CRs-Fixed: 3542065
It adds a set of frag way allocation APIs explicitly.
IPA Tx nbufs change to frag way allocation API, which saves memory.
Current __qdf_nbuf_alloc changes to non-frag way allocation by
default if SKB RECYLCER not defined.
Change-Id: I5f87ffac54c49f9af920775c13b6dfdd147476dd
CRs-Fixed: 3534452
Extract WMI Service bit for ATF 512 Max client support advertised by
Firmware as part of wmi service ready.
Add rxops functions as for upper modules to get it.
Change-Id: I51e8dcaad96bdd29eb6fd4c37b0917127696ede6
CRs-Fixed: 3551661
Current HAL delayed reg write is tied to SRNG notions, hence
implement delayed reg write logic in HIF since WCN6450 does
not use SRNG interface.
New feature flag FEATURE_HIF_DELAYED_REG_WRITE is introduced
to disable/enable this support.
Change-Id: Id7087ad53cd5879cf49ee0e84dd727de61137541
CRs-Fixed: 3519702
Define a new QCA vendor attribute to enable/disable trigger
based UL MU transmission.
Change-Id: Ide36ec4869dc462879a57ff9a1e06f9f48e5c8d0
CRs-Fixed: 3538865
Regarding to the platform suspend, generally the hif_bus_suspend() will
disable the CE irqs, however the irq is shared in the single MSI case,
so the MHI irq is disabled as well which cause no MHI ring event notified
in the following pci bus suspend.
The fix is to bypass hif apps irqs handle for single MSI case during
suspend-resume stage.
Change-Id: I4f9068900e85fe57c2a82d841846b3fff6da0696
CRs-Fixed: 3549884
Masking the MLO API, mlo_setup_get_total_socs
using ic_eht_target check for non-MLDs in cmn_dev.
CRs-Fixed: 3551482
Change-Id: I8d585f534146f58beee605b2165bb0c51fc5bdb9
Currently policy mgr api policy_mgr_convert_device_mode_to_qdf_type
accepts only QDF_OPMODE as an argument and converts it to
policy_mgr_con_mode. Also, name of this api does not reflect
the task this is doing.
With the new SAP mode for low latency low throughput SAP,
to convert the QDF_OPMODE to policy_mgr_con_mode, host driver
needs to know if it is ll_lt_sap or normal sap. To get this
information, update policy_mgr_convert_device_mode_to_qdf_type
api to accept the psoc and vdev id as parameters. Also, rename
this api to reflect the task this apiis doing.
Change-Id: Ib182d8091305fd9c4f35b424d7b4a751a61730ad
CRs-Fixed: 3525427
When one of the enabled CE tasklet is executed, it will
check latency of all the others which are enabled, it's
redundant. Add a new API to check latency for a single
tasklet.
Add API to record sched time for a tasklet, which will
check the enablement of detection before recording the
time.
Change-Id: I515ca27fc2e97231397573b4903c001d29326bd2
CRs-Fixed: 3514285
When the peer delete timer/vdev manager response timer expires, host checks
if the umac reset is in progress. If so, host will retrigger the timer.
It is possible that the umac reset is just completed and either of these
two timers got expired. In this case, host will assert saying that the peer
delete response/vdev manager response is not received from FW. FW may take
a few milliseconds to send the peer delete/vdev manager response to the
host after the umac recovery completes.
Hence, to avoid the crash, check if the umac reset was in progress during
the umac reset buffer window.
Add the below changes as well,
1) INI support to get the umac reset buffer window value.
2) Renamed the API dp_umac_reset_is_inprogress as
dp_get_umac_reset_in_progress_state to return either
CDP_UMAC_RESET_IN_PROGRESS or
CDP_UMAC_RESET_IN_PROGRESS_DURING_BUFFER_WINDOW.
Change-Id: Ie15ef0731bad4b0ed955a479f00e297b7ba10729
CRs-Fixed: 3522665
This change initializes some uninitialized local
variable to avoid arbitrary values in some cases.
Change-Id: I906528514c41132ead23433a8a91374b4309c543
CRs-Fixed: 3545869
