Add support to include per msdu header info for each msdu in monitor mode.
Set HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_RESERVED in htt msg
from host. Enable per msdu bit and set it in the dp_htt to be used for
filtering.
Change-Id: I36217e893c40570c86b758f586c581d88633b557
CRs-fixed: 2101013
Add support to process HTT PPDU per-user TLVs that are sent to host from
FW on PPDU Tx completions.
Change-Id: Ia05d5d0e045bfeb4143886ef3a1b075d927645fa
CRs-Fixed: 2098696
Add support to process HTT PPDU statistics for transmit
datapath and deliver PPDU indication to CDP interface.
Change-Id: I22e757497e13ce86fb7b42112fd56555c58e97bc
CRs-Fixed: 2098696
In existing implementation when previous stats handling is under process
and a new stats event is received, new stats event is dropped.
Add support to queue any received stats message and process it
later in work queue context.
Change-Id: I7895a2f7ac49456c49374ce209da97c2148f43a2
CRs-Fixed: 2076552
Add a misc list which stores HTT msgs & later frees them during rmmod.
This is required to prevent memory leaks during rmmod.
Change-Id: Iecc04ec38cfa1b459064da74dffa5bfeffdba956
CRs-Fixed: 2068058
Setup & process the RXDMA_DST ring to handle error frames
from RXDMA block. Pro-active fix to handle the WAR for
the WBM stuck issue seen when sending RX_FLUSH command.
Change-Id: Ibf56062da2cd9b5d447f1d43bbae5944426d88c8
CRs-Fixed: 2059870
Enable RXDMA status, desc, buffer and destination rings to
support monitor mode. The change also provides fix to properly
map pdev_id to mac_id.
CRs-Fixed: 2071602
Change-Id: Ie9caaaa0021d5842eaf28a5532b3ab5512fe507f
Currently all mgmt, ctrl and data frames are not enabled
while requesting for the pkt_tlv configuration for the
monitor mode. Adding changes to enable these while sending
HTT ring configuration message.
Change-Id: Ifa23edb55562512e18bb2ee4c426fa0b5e45a577
CRs-Fixed: 2071602
implicit conversion from enumeration type 'A_STATUS' to different enumeration type 'QDF_STATUS'
implicit conversion from enumeration type 'QDF_STATUS' to different enumeration type 'A_STATUS'
CRs-Fixed: 2063344
Change-Id: Id3613d0b7fca58c3d94c5af59838b0bff3ef26de
The pdev id in host is not the same as firmware MAC id
Add host pdevid to firmware MAC id mapping code
in set pdev id for htt sring setup and
set pdev id for htt rx ring selection cfg
The mon_ppdu_status is not synchronized
Fix the issue on pdev mon_ppdu_status by reset
mon_ppdu_status to DP_PPDU_STATUS_START after
monitor destination ring is processed
Add code for mpdu fcs error for later use
Change-Id: Ia6245cc9441e3339bcd01ed18fdce2f33f3f7699
Changes to process PHY TLVs from monitor status ring and extract
information required for radiotap header.
Change-Id: I99d642e7506ea797b26dbfac89fd223d1a4c0a55
CRs-Fixed: 2048006
Adding support to parse stream of HTT TLV's recieved as response
to the HTT EXT stats request message
Change-Id: I44c990a1ed91c2381b89811de33c0717bd24be7d
CRs-Fixed: 1114641
Window size needs to be incremented by 1 since fw needs to
represent a value of 256 using just 8 bits.
Change-Id: I18cdb6fb928f28893dc0e1fd2fb574a12ca53972
CRs-Fixed: 2025197
This change is for supporting monitor mode VAP. All the monitor mode ring
is configured. The related monitor mode ring includes:
-monitor mode buffer ring
-monitor mode destination ring
-monitor mode status ring
-monitor mode link descriptor ring
The packet is not sent to monitor mode ring unless the monitor mode VAP is
configured. This release support Multiple VAP - AP/STA VAP plus Monitor
VAP configuration. The status ring is not used in this release. However,
the ring is tested and the ring is moving and there are TLV's in the ring.
Change-Id: I782ee0c3b998d8b3bbac79b5e7fdecdbff15fa93
CRs-Fixed: 2013049
pkts should be forwarded from one STA to another
STA belonging to same VAP from within the driver
Change-Id: I68eb0dd91f7ac54352b4882ffdb9d5d53d627db1
Conflicts:
dp/wifi3.0/dp_rx.c
dp/wifi3.0/dp_types.h
Conflicts:
dp/wifi3.0/dp_rx.c
Change-Id: I68eb0dd91f7ac54352b4882ffdb9d5d53d627db1
Setup all TID queues during rx peer init
Add support to handle ADDBA HTT msg
Allow pkts to be fwd to stack even if peer isn't found
Change-Id: Icdfec2eeaa3e0ca62202ed278cd63209b8f79cb2
CRs-Fixed: 2016138
Firmware expects the following:
- mac id for the refill ring configuration should be 0 (soc)
- mac id for the rx dma rings should be 1, 2 (mac 0 and mac 1)
Change-Id: I23c652e2e1f8e2fca69647906321e4d867a42609
CRs-Fixed: 2003050
Since dp_htt_h2t_send_complete() is only accessed from within
dp_htt.c, and since there is not a public prototype, make it static.
Change-Id: I002ac20d0e5ced8ddc9d5099a987a5ce208b4cfc
CRs-Fixed: 1108111
Currently some of the public functions in dp_peer.c do not have their
prototypes exposed in a header file. In addition clients of these
functions currently have local prototypes. Fix these issues by adding
the prototypes to dp_peer.h.
Change-Id: I461cf69024da56fad57b75a325775ecd68872c8e
CRs-Fixed: 1108085
Wifi 3.0 compile against cdp apis.
Make compilable against mobile code base.
selective hw common header include.
Change-Id: I051f917001c0d13c762d9cb5a3ec141cd278d0e7
CRs-fixed: 1075736
Add support for replenishing the rx buffers using the host to
firmware buffer ring.
This includes adding a flag QCA_HOST2FW_RXBUF_RING:
When QCA_HOST2FW_RXBUF_RING is enabled the host will do the following:
- Allocate the refill buffer ring (HTT_HOST1_TO_FW_RXBUF_RING) and
populate it with
rx buffers
- Send the refill buffer ring configuration to the firmware
- Allocate the rx DMA ring (HTT_RXDMA_HOST_BUF_RING), leave it empty.
- Send the rx DMA ring configuration to the firmware
When QCA_HOST2FW_RXBUF_RING is disabled, the host will do the following:
- Allocate the rx DMA ring (HTT_RXDMA_HOST_BUF_RING), and populate it with
rx buffers
- Send the rx DMA ring configuration to the firmware
CRs-Fixed: 1074199
Change-Id: Iec05a973cd9d628c742e3aaa16b8dabc7797625d
