In video mode for fps greater than 60, perf cpu dma latency votes
are not removed during idle fallback. Made changes to remove and
add the perf cpu dma latency votes during idle fallback and idle
exit scenarios respectively.
Change-Id: I8dffc743bd48c96a6022935f71057a0223d9696e
Signed-off-by: Andhavarapu Karthik <kartkart@codeaurora.org>
The hypervisor is renamed to gunyah now. All 'haven' words need change
to 'gunyah' and 'hh' words in hypervisor interface need change to 'gh'.
Change-Id: Ia7ff6d855eb5548540a2f11a781c2555beb23187
Signed-off-by: Cong Zhang <congzhan@codeaurora.org>
Logging connector id will help debug the issues related to
DP MST stability and pre-merge tests. This change will log
the DP MST connector IDs modified during stability tests.
Change-Id: Ifaf8e319697a809b02c24c473acec8da521286e2
Signed-off-by: Sankeerth Billakanti <sbillaka@codeaurora.org>
Currently, the max voltage swing supported is level 2. This change
adds support for voltage swing level 3 in the dp driver.
Change-Id: Idf1dbb4e74edff924067130a5edea869f392bf38
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
While setting up vsync source, display info is used to decide whether
or not watchdog TE should be used. This change passes display info
as a parameter to vsync setup rather than using the encoder's display
info which is not updated in the case of panel dead error.
Change-Id: I928ee2012eec7bf63f4ba3538082bc3e47d5e99d
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
This change adds allowed_dsc_reservation_switch to determine if
dsc seamless switch is supported for DP. Also, based on the
flag, it determines and populates the required number of
available resources for DP.
Change-Id: I9cd7219a50d352369c5bc8386ce7dc25c30b80b6
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
Mode information apart from the fields in
drm_mode_modeinfo that can trigger a modeset like
dsc-nondsc, video-cmd are defined in sub mode.
For each mode in connector->modes there can be
multiple submodes.
Change-Id: Ib8697d3fa4ea5261d9ac4943b1a4149e22c4da2f
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
This change adds logic to determine dsc switch based on
the connector property "CONNECTOR_PROP_DSC_MODE" and
performs seamless DSC switch if there is any change in
DSC configuration. The connector property is populated
in msm_sub_mode based on which suitable mode is selected.
Change-Id: Ifc4931f16dfb814781bc1d72b103e09103e6bfee
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
While releasing continuous splash resource, place IB vote
with value populated from device tree. If device tree has
not specified a value, use default IB enable value.
Change-Id: I08f7ddc56ab580887cd4f31c93d7b8c358fb3d13
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
During modeset, private mode changed is detected from
msm_display_mode which is present in sde_connector_state.
In the current code, sde_connector_state is found from the
drm_connector variable which will not be valid
during atomic check phase and new connector state is
required here. To handle this, drm_connector_state is passed
along with the drm_crtc_state while detecting
msm_atomic_needs_modeset condition.
Change-Id: I62c162eff6e1c091cb05b3f049a40a0f25b710ba
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
For higher refresh, to provide higher transfer time we need to disable
RSC solver in MDP. This can be configured through the panel timing node
devicetree property. This change adds the parsing of the devicetree
property.
Change-Id: I9e708325da35086d2f955cbcc80bb164ccb116cd
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Linear formats have an increased width of 5k on waipio
target however this excludes YUV and only applies to
RGB linear formats. This change reduces the max linewidth for
YUV format to 4k.
Change-Id: I51cfc272ea14e10cde87098e879ef7dfbd9f117a
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
This change sets a flag to true if a mixer is a virtual mixer.
Virtual mixers will skip setting up mixer ops and debug register
dumps as their range is not valid. Since mixer ops are no longer
guaranteed to be set, add null checks before using these ops.
Change-Id: Idfe7e1e2b893dadbbe6756d69d0c4ca4fa6ae4ce
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Fix qos lut offset calculation based on the refresh rate index.
Current calculation is not accounting qos lut size for qseed and non
qseed lut types.
Change-Id: I281fa7b3a245ad9f4a3d2ba45bb5957c3900abd6
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
This change adds a fix to correct indexing logic while
parsing frame data buffers and resets the count correctly.
Change-Id: Ic5a20ecd7093423ea293432c9492eb920acdd6f4
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Use panel width variable to compare against RC region size instead
of the ROI size which can change based on the LM configuration.
Change-Id: Ia1d5f88893a55778172e6da10bb235e9c483cd38
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
This change fixes the continuos splash logic that identifies the
pipes staged by bootloader. The same code flow is used in trusted ui
handover as well. Existing logic was counting the pipes twice if the pipe
is staged on both the layer mixers. This change simplifies the pipes
already staged before handover by using the pipe index to convey if
it is staged or not.
Change-Id: Idb255f2077161dc3553114ac5d04e0ef743bb5ea
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
This change prevents entering into idle pc during ESD
recovery. In the event of a panel dead scenario, the panel
TE is no longer valid until display is enabled again. Until
the time display is enabled, idle pc will be blocked so
that display does not fall into then exit idle pc and
attempt to set the vsync source to this invalid panel TE.
Change-Id: Ibdc71b803d50923832f08b238a96aa28854aaea0
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Change adds more panel and display information during the DSI
display bind.
Change-Id: I3571244501149a95ea4f6ab0e496112199f7bbde
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
