Remove deinit sequence calls and register devm
managed callbacks, so that kernel can invoke
then, when dev scope ends and cleansup all
associated resources.
Change-Id: I729fd21fe32d9f39240d0b743f910409d93a00c5
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
Currently BASELAYER Priority ID was being configured at BITSTREAM
PORT, For dynamic configuration, baselayer priority ID needs to be
configured at RAW port. Added change for the same to configure this
property at RAW port.
Change-Id: Ice927aae4d8ed5228ef1b31da7ec58bb81f2aea8
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
This is resolve some of this kind of checker err.
Change-Id: Ief665e17045c3b6a6ff636ab6404c6e0c93e9460
Signed-off-by: Ankush Mitra <quic_ankumitr@quicinc.com>
This change will resolve this
checker err from all directory.
Change-Id: I7b7b3af554c97fef9d81210fdf8984d2a53facbc
Signed-off-by: Ankush Mitra <quic_ankumitr@quicinc.com>
Remove inst check from all the functions in video driver.
Inst check is present in most of the functions in video
driver which is not required.
Keep check only at root level functions and remove
from rest all of the functions.
Change-Id: Ib310cd3df5e8612a9fc3a5aa654dff4203a12906
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
1. use max of operating and frame rate for fps
2. vpp_cycles is considered close to frequency
corner if vpp_min_freq is greater than max
required frequency
Change-Id: I9dc995ca16e4eeae18497a8648dfef64e16dfbc2
Signed-off-by: Deepa Guthyappa Madivalara <quic_dmadival@quicinc.com>
In case of encoder drain followed by immediate
stop usecase, fw might send drain last flag info
packet instead of last flag buffer due to
insufficent output buffers. In this scenario, driver
signals EOS through an event. To avoid sending last
flag buffer in some usecases and EOS event in other
usecases, to maintain consistency, always send last
flag information via EOS event to client.
Change-Id: Ib816603fb171a5f3f72f163614588490514f8c59
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
1. allow any client set operating rate (less than 2^15)
2. remove operating rate dependency for admission control
3. allow turbo for low latency case as well
Change-Id: I4b0f29c3756a592a9baedec8996653e5cb5292d5
Signed-off-by: Deepa Guthyappa Madivalara <quic_dmadival@quicinc.com>
Update BaseLayerPriority ID as dynamic property for pineapple
Change-Id: Ib036c8c47190842dff76fa45d50a65385ef28dca
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
- Introduce new control to set HEIC encoder tile size from HAL
- Support 1k x 1k tile encoding along with existing 512 x 512
tiling
Change-Id: Iaeffe421f8311d818695c3ae9af7cabcc8892043
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
Move private controls from each platform source files to
common header file
Change-Id: I22d8aa7f81919d950eed6b1f4ccd020c803a7ce9
Signed-off-by: Ashish Patil <quic_ashpat@quicinc.com>
Client is setting NV12 fmt as OP format before initial reconfig
So during input port stream_on, subscribe_input_property is
failing due to ubwc check(NV12 fmt), so DPB_LIST cap is getting
disabled, but later client is setting NV12C during reconfig.
So msm_vdec_release_nonref_buffers() during qbuf is bypassed and
release cmd is never sent to fw for pending ro buffers. Infact
entire RO handling at driver side is disabled.
Looks like due to some reason client was not requeueing same
buffers at same slot, So eventually number of pending RO buffers
increasing over the time. Once count shoots more than 256 fw
assertion happens and i.e leading to system error.
Remove UBWC check while subscribing input port properties, so
DPB_LIST willbe subscribed always and avoids above mentioned
issues.
Change-Id: I57ea0ea637ae3a57fcad430b212dcdb10f8e6d0f
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
read the av1 uniform tile handling propert from fw
and display it. Required in debugging av1 usecases for
power calculation
Change-Id: I443e5afd591a8131c667c64cebb417fc022693ac
Signed-off-by: Ashish Patil <quic_ashpat@quicinc.com>
enable support to send META_TRANSCODING_STAT_INFO via
HFI_MODE_DYNAMIC_METADATA.
Change-Id: I32435e2e30a7a5d50c53645b7c92bbe38f7c90b3
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
Remove HEIC codec definition from UAPI and use it as private
codec type
Change-Id: I4023b638f56e9db11c74ae8894f8451ada05c6e8
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
If the av1 tile rows and columns are greater than recommended decoder
av1 settings,vote for higher frequency.
Change-Id: Iea9f542e0b925a9ecb063c11b1827f31164f5a7b
Signed-off-by: Ashish Patil <quic_ashpat@quicinc.com>
Remove capability pointer and allocate
memory with max cap size.
Change-Id: I7f53e3b35439f91b72f057695b6e63f71bfecc0a
Signed-off-by: Ankush Mitra <quic_ankumitr@quicinc.com>
Move Qos register programming to driver. Use reset_control_acquire
api to ensure xo clk is on before programming
Change-Id: I52bf416da42675d206e1124368f75f627b8b2e9f
Signed-off-by: Maheshwar Ajja <quic_majja@quicinc.com>
power calculation is optimized by using encoder reference handling
and GOP details.
Change-Id: I29707fcd152f89e213532afc9c4b6191d23b4d6c
Signed-off-by: Ashish Patil <quic_ashpat@quicinc.com>
- enable Eva stats, hdr10/10+ as dynamic metadata.
- Make eva stats dependent on bitrate mode.
Also remove preprocess and layer count as
child of Eva stats.
- Make Hdr10/10+ dependent on profile.
- Adjust transcoding stats metadata based on
bitrate mode, fps and resolution.
Change-Id: I7b110962e29db50cb321d69a0fb301950436da6f
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
Add driver version for clients to query and manage
accordginly.
Change-Id: I5e8c51a4f18c28c0ed4d5a8bdaf0660d175c420a
Signed-off-by: Maheshwar Ajja <quic_majja@quicinc.com>
Add debugfs support to disable synx fence falling back
to dma sw fence via parameter "msm_vidc_disable_synx_fence"
Change-Id: I46b4833c2dfabec95f5ff34a0aef42043f8f6f5c
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
Add Synx V2 fences support to improve latency
in video decode usecases.
Change-Id: If21f8b65895364a804f8e03580b09c44b377c199
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
- Replace prior macros from downstream driver as these are now
defined in upstream V4l2 include files
Change-Id: I34dc063df0c2ca2194c115d310d7fe5026cd573e
Signed-off-by: Deepa Guthyappa Madivalara <quic_dmadival@quicinc.com>
Replace prior macros from downstream driver as these are now
defined in upstream V4l2 include files
Change-Id: I7d1677cd7ef95c05219e043e0c78d29299036bed
Signed-off-by: Deepa Guthyappa Madivalara <quic_dmadival@quicinc.com>
Update power calculation to avoid low framerate or
frame drop issues
Change-Id: Ice306a44d4ea8242d965c0e5d03edffc0f5e0f8b
Signed-off-by: Ashish Patil <quic_ashpat@quicinc.com>
Add support to enable ring buffer for enc intermediate
bin buffer to improve encoding performance.
Change-Id: Ifbf50cb48278c62c09a20bc7626a3b6288813830
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
Introduce a control for client to enable or disable
csc. Disable csc for 10-bit encoding based on color format.
Change-Id: Ia49324332ce9b05b6f1a1283fa758638a8cc3ab8
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
