Provide an API to accept the config parameters
from the upper layer and store them in wlan_cfg_ctx.
Enable/Disable the datapath features based on these
parameters.
Change-Id: I9336cac686bfb875cea242685a122ec98acdf8c2
CRs-Fixed: 2097229
Add feature to obtain position of head and tail pointer of all rings.
Change code to include 'iwpriv athx txrx_stats 263' that gives the entries
pointed to by head and tail pointer.
Change-Id: Ib125db8982362c50a415058fd29f07f326991a50
CRs-fixed: 2098806
Add a new dumpStats parameter (25) to dump disconnect stats.
The following command will dump disconnect Stats into QXDM.
>iwpriv wlan0 dumpStats 25
Related qcacld-3.0 change I0908c947b5c829f51b087871ad11d5674908dca2
Change-Id: I359ef19c268123848fe6195f6453a6c246fba3a1
CRs-Fixed: 2058958
Add support to process HTT PPDU per-user TLVs that are sent to host from
FW on PPDU Tx completions.
Change-Id: Ia05d5d0e045bfeb4143886ef3a1b075d927645fa
CRs-Fixed: 2098696
Add support to process HTT PPDU statistics for transmit
datapath and deliver PPDU indication to CDP interface.
Change-Id: I22e757497e13ce86fb7b42112fd56555c58e97bc
CRs-Fixed: 2098696
[PATCH 0/1][CR:2093711]
The client isolation feature parameters were
pass and stored but were not used for enabling/disabling.
Added the changes to enable disable the feature.
iwpriv ath0 ap_bridge 1
iwpriv ath0 get_ap_bridge
By default feature is enabled so the STA-STA packet does not
go through the bridge interface and incase the feature is disabled
packets are given to the kernel stack.
Change-Id: I76e8683a0a7e8791cf8cf743e39b7201fee39d30
When hdd_get_tx_resource is called, if free Tx desc is lower than low water
mark, vdev->os_q_paused will be set as 1 and WLAN_STOP_ALL_NETIF_QUEUE will
be triggered after a while. Before WLAN_STOP_ALL_NETIF_QUEUE is triggered,
if ol_tx_flow_ct_unpause_os_q is called, WLAN_WAKE_ALL_NETIF_QUEUE will be
triggered and vdev->os_q_paused will be set as 0. In such case there will
be no flow control unpaused forever.
Tx should be paused by flow control when Tx desc is lower than low water
mark, and unpaused when Tx desc is bigger than high water mark or Tx is
already paused by flow control.
Change-Id: Ib60139fd94a4fb88c92a7f8aaf886ae9d3ca4c75
CRs-Fixed: 2090475
Fixed key derivation for mesh rx stats for received packet. Added cdp api
to get the key by passing key index and peer mac address.
Change-Id: I6a4c342b614ae85a5ad2fb047f2d8686aa068196
CRs-fixed: 2094335
Send peer create to NSS only when peer map comes for connected peers.
When peer map comes for WDS peers only update WDS peer specific entries.
Change-Id: I32d785180bcd1dae2703d40b55f4536685f10439
Add support for monitoring receive traffic from WDS nodes and
aging out inactive WDS nodes
Change-Id: Iedea826832a5421714c00bccadc6e0dc4acd4c7e
CRs-Fixed: 2004658
Add CDP API to get security type for ucast and mcast from
peer handler. Add additional peer handler argument for raw mode
rx decap functions. The peer handler is needed in the raw mode
functions for getting the security type of the frame and process
it accordingly.
Change-Id: I8b4728e9eb0ff29849805bb461c81e4fc3accc81
Currently max_peer value is hardcoded with DP wlan_cfg. This change adds
a generic interface to obtain a configuration parameter from OL_IF and
store in DP
Change-Id: Id437ab3bcd02fb1cbcbe8b56d55d19780af87066
CRs-Fixed: 2004658
Adding support to parse stream of HTT TLV's recieved as response
to the HTT EXT stats request message
Change-Id: I44c990a1ed91c2381b89811de33c0717bd24be7d
CRs-Fixed: 1114641
1.Add QDF_TRACE_STATS for datapath stats to remove
module prints.
2.Fix Stats indentation for better readability.
3.Add missing stats
a. Update Packets on Rx side on per-ring basis.
b. Add stats for features (TSO/SG/RAW/Mesh)
c. Add packet type count on Rx.
Change-Id: Ief1719b67330f729ff60703ec2be26bc5e4201e9
CRs-Fixed: 2034876
Add support to set address search flags in WLAN Tx Descriptor
for TDLS operation
Change-Id: Iafb15fb1efd84a4bef436062368401a5496e4468
CRs-Fixed: 2041759
Add ring_packets variable to collect packet count on rx
path. This stat variable is incremented on
per ring - per core basis.
Change-Id: If8b51a757b28c231a6444e6b7f2e336b8c0cdd8e
CRs-Fixed: 2035142
Add support to set addr_search flags in WLAN Tx Descriptor
as per vdev operational mode
Change-Id: I25fcd4bf450982f8aecc6e91236211c17d5f3f22
CRs-Fixed: 2004658
packets received on a particular radio are queued to
a user configured reo destination ring.
Change-Id: I080090f22b80fd8d8868df4145b82888e1111cea
CRs-Fixed: 2017081
Add Invalid Peer stats on rx side
Add aggregation stats missing on Tx
API to update Rx Errors
Change-Id: Ib757ee7b89d9b9113e1a41b5a520faabb9ff28bb
CRs-Fixed: 1114641
Add API to handle NAWDS packets on tx side.
Add API to handle invalid peers and pass them to umac.
Change-Id: Ie8c2508e4f51c7d6969c9eb6439919c57dd427d4
CRs-Fixed: 2008205
Introduce a new iwpriv command txrx_stats to
print host and firmware statistics for lithium
chipset
Change-Id: Ib048c64f903c7a97508f8b03bebe7f7c1d9e6c05
CRs-Fixed: 2017426
Add per peer stats
Add support to update APSTATS
Change QDF_TRACE to DP_TRACE for improved readablility
Change-Id: I4be2adf2a1d7f978eb2961a544435d525c97923d
CRs-Fixed: 1114641
Added cdp support for external tx completion. In case of mesh mode per
packet tx completion stats has to be filled in the meta header and external
function has to be called for updating these stats. It is the responsibility
of external function to free the buffer after reading the stats
Change-Id: I45ba800acf9b4d6091cc3f9aafc67c1f1f00f379
CRs-Fixed: 2003389
Adding new defines for FW_STATS duration and FW_STATS
request. This will be used by ol_txrx_fw_stats function
for getting per_radio or per_vdev stats
Change-Id: I0a241172cd5b86aea0da99135ed574f6b1540c16
Crs-fixed: 1075597
Remove the htt.h file inclusion from inside the cdp layer.
The upper layers should include this. Create a common
enum structure to be used inside the cdp_if layer.
Translation will take place in the DP layer.
Change-Id: I0c3e30eab54c0efafb917ddb304678a392788c2b
Crs-fixed: 1075597
Added a new layer CDP_IF inside dp which is an intermediate
between the data path functions and the upper layers. All function
calls from outside the DP layer to the DP layer goes via the CDP_IF
layer
Change-Id: I76e671c85d2d02aa0a65a90b356840d3aeede52d
CRs-Fixed: 1075597
