Add wrapper to make WMI layer agnostic to the context in
which the WMI registered event handler should execute.
Change-Id: I3b8b4621cfa8d816188fdc5c688bce94528eca59
CRs-Fixed: 1096016
There is a regulatory requirement for Specific Absorption
Rate (SAR) whereby the phone transmit power is reduced
when it is determined that the phone is in close
proximity to the body.
Implement a vendor command interface to set SAR power
limts dynamically.
Change-Id: I0a214a2af780e9dd8c381c4e9eaa7d8cab6ef853
CRs-Fixed: 1098102
The term "agile" is used by hardware for swift/fast channel change.
Use precac for the zeroCACDFS instead.
Change-Id: I35f4d61cc93b3542feb8b286cbdf3a4474df5a75
Crs-fixed: 1073945
A new iwpriv command has been added to configure the period
and wlan duration for a btcoex duty cycle.
As a part of this registring the wmi_service_btcoex_duty_cycle
for WMI_SERVICE_BTCOEX_DUTY_CYCLE.
Also send_btcoex_wlan_priority_cmd registrtaion for btcoex
duty cycle command in non_tlv_ops.
Change-Id: I7f3bfdfd9804566d6d0b7cce7025e99db57d0e23
Acked-by: Basamma Yakkanahalli <ybasamma@qti.qualcomm.com>
CRs-Fixed: 1064437
Agile flag WMI_CHAN_FLAG_AGILE_MODE added. When this flag is set,
the primary VHT80 will not be affected when channel change is done.
Change-Id: Ie6bce12ec955c0c8a79246dda57092808611803d
CRs-Fixed: 1072504
For WOW Enable, firmware accepts a bitmap of flags, but passing them
to firmware is not exposed by WMI. Modify WMI to allow passing WOW
Enable flags to firmware.
Change-Id: I458b01bc6a4e5b14b2a1dfee928136daeb70ebe9
CRs-Fixed: 1092068
We want to enable the compiler's -Wmissing-prototypes switch, but
there is existing code that is generating warnings. Fix all warnings
in wmi.
Change-Id: I2452ffa4e9fa1de8a7bd75d04dd4a0f94d7cf55c
CRs-Fixed: 1093298
Add helper routines to extract TLV params in WMI EXT service ready
event. These helper routines abstracts all TLV related information
providing APIs to extract ext serivce ready params.
Change-Id: Ic989331856ed2f9376965bdec4b658328f9e470b
CRs-Fixed: 1079237
qcacld-2.0 to qcacmn propagation
To debug the fwr stuck issue as early as possibile,
reduce the wmi max pending command threshold to 256
from 1024.
Change-Id: Ic3cbe26cca979dcaa68fca03e6fe1af397cf0c4f
CRs-FIXED: 1080761
For Beeliner family of chipsets, the number of values expected is 688
for 2G and 1540 for 5G
Change-Id: I2c47ed98f639c09453687fce7f713946304a7036
CRs-fixed: 1071083
Recently added changes for coexistence of WIN/MCL TLV implementation
through CL I6868c288a43fd3afb19c84b8a9d4ef0dfbee5c94 require
adaptations in QCA WIN driver to successfully compile.
Add required definitions in WMI layer to adapt WIN driver to
changes made for coexistence.
Change-Id: I99550ca10553d8096b8967249c006bac4e0c62df
LOWI messages to register, set capability
and send RTT measurement request are not sent assuming only
LCI and LCR messages are sent out to the FW using ol_ath_lowi_data_req_to_fw.
Add code to send messages other than LCI and LCR through the API in
ol_if_lowi.c when msg subtype is not one of LCI or LCR.
Change-Id: I2deedaa6e03e769bf802337b2ec93d9573eb1b5a
CRs-Fixed: 1079169
Tx data capture feature needs a new WMI command.
The fw common file is already reflecting this new
command.
New enum is added to WMI_HOST_PKTLOG_EVENT for this
feature.
Change-Id: I7b8535a311033debbbee5f56c87ac4858a0aa8e1
CRs-Fixed: 1068402
Acked-by: Debasis Das <ddas@codeaurora.org>
qcacld-2.0 to qcacmn propagation
Make the following enhancements to the EPNO feature:
1) Implement the reset EPNO command handler
2) Add new parameters for candidate score calculation.
Change-Id: Iad1ff9c2b003c9e3ddbc3373366686040ccb55ca
CRs-Fixed: 1075380
If param->len was 0, ret would be returned without being initialized.
param->len of 0 is unexpected, so return an error.
Change-Id: Ib9b0a60976dedcf8fcd4184083a9948892791621
CRs-Fixed: 1072077
Add TLV changes to pass DISA parameters received from
WMA and pass them to firmware for firmware
to encrypt data and send back to driver.
Change-Id: Ic6928a93f799c47518fbbad96564062f595287dd
CRs-Fixed: 1072545
qcacld-2.0 to qcacmn propagation
As Current WMI interface need both the ARP/NS configuration
in single command. To support active offload host need to
cache the ARP/NS at wma layer so host can fill the other
request and configure down to firmware complete request
(ARP+NS).
Change-Id: Ie0a57d216379817ff0ae48f4f582c9108e8ecca1
CRs-Fixed: 1067683
These fixes are made during qca8074 VP control path bringup.
Add fixes in tlv.c and enable TLV helper routines for WIN.
Fixed some inconsistencies in wmi API params by adding compiler flags.
This needs to be cleaned up so that API and params have common interface
between WIN and MCL.
Change-Id: I0821daa58df86ad0b394a7846a982a9e3577cd14
CRs-Fixed: 1063252
Send HT/VHT CAPs IE to firmware per band. This will allow certain
features like LDPC to be configured per band.
Change-Id: I21c83af984f9be3ade46121ef148b52568c3ad0f
CRs-Fixed: 1059454
As part of MBO(MultiBand Operations), host driver need to supply
the default scan IEs to firmware at wifi init time using existing
VDEV SET IE command. FW uses these Scan IE's in subsequent scans
.i.e. FW initiated Probe Requests.
This Fix updates the vdev_ie_info_param struct with ie_source.
ie_source will be set with zero for VDEV SET IE commands from
host driver
Change-Id: Ie2e87da8aa94b76aef431e25d9974b8fed63eba9
CRs-Fixed: 1039969
Enable or disable OKC flag in WMI roam scan offload request based on
okc_enabled parameter in roam request from CSR.
Change-Id: I19ad7ea2171532f2417742e205d408bdd52682c0
CRs-Fixed: 1057181
This change implements the Non-TLV WMI API for setting bandwidth
fairness. This WMI command was implemented as part of the recent WIN SW
release. This change ensures it is adapted to convergence code structure.
Change-Id: Ib9984c43b91b105bfb4687a7591f4fab509febc4
CRs-Fixed: 1060577
This change fixes the compilation issues faced due to WMI convergence
changes on the big endian platform.
Change-Id: I18bae4fb7884683d8621ce9a862dc1a51ef84f82
CRs-Fixed: 1039318
Propagation from qcacld-2.0 to qcacld-3.0
Current implementation has support for IPv6 addresses of type
unicast for NS offload to firmware.
As part of this change add anycast addresses for NS offload.
CRs-Fixed: 954880
As part of MBO(Multiband Operations), host driver need to supply
the Assoc IEs to FW after initial connection. FW uses these Assoc
IE's in subsequent roaming.i.e Reassociation requests.
This Fix updates the WMI interface to provide support for passing
Assoc IEs to FW.
Change-Id: Ida3d2947714002233090a3f9075dd8d674a3c224
CRs-Fixed: 1039969
Add changes to allow coexistence of WIN/ MCL TLV implementation
through use of CONFIG_MCL flag and change of MACRO names.
Change-Id: I6868c288a43fd3afb19c84b8a9d4ef0dfbee5c94
Acked-by: prgandhi@qti.qualcomm.com
CRs-Fixed: 1008872
Compilation fixes made to compile TLV on WIN code base.
Also, Previous gerrits used WMI_NON_TLV_SUPPORT for all
compilation fixes of WIN vs MCL, using CONFIG_MCL and
CONFIG_WIN wherever it is found appropriate to keep it
consistent with other modules.
Change-Id: I1c129d736746556210c46f3122e2739d233e1d6b
Acked-by: prgandhi@qti.qualcomm.com
CRs-Fixed: 1008872
Compilation error occurs due to undefined struct when
WMI_INTERFACE_EVENT_LOGGING disabled.
Use void pointer as argument to wmi_mgmt_cmd_record() and cast as header
struct inside logging function to avoid casting as undeclared type.
Change-Id: I7d0922ee2009b235473febdbcbc3317e432a1386
CRs-Fixed: 1043597
qcacld-2.0 to qcacmn propagation.
oem data request len size should be of 4 byte instead of
1 byte.
Add changes to correct len size in wmi unified API.
Change-Id: I9b377420c50ff1160964f94be5eaa0072df0f63d
CRs-Fixed: 1013488
Fix the occupied channel list that is being passed from CSR to
WMA to WMI to firmware.There is a conversion happening in
WMA from channel number to frequency which is the root of the
issue.
Change-Id: I8a2f8c9d31897b38086df26ebd386ec59d0f3540
CRs-Fixed: 1039020
More detailed logging needed for mgmt frames
Add vdev_id, frame type, subtype, and channel to logs by defining wrapper
function around logging macro and calling it from send_mgmt_cmd_tlv
Change-Id: I0c8c26e3194d97be7d903f64c5c5909c2d4b9799
CRs-Fixed: 1011346
qcacld-2.0 to qcacld-3.0 propagation
Add support for NSS configurability per vdev type.
- Configure the 2g and 5g NSS with the INI value of
each vdev type
- Program the HT and VHT IE to FW for 1x1 and 2x2 mode,
FW will include them in scan probe request frames
Change-Id: I5cbf17a14ab6becad6cf5765ae5039fc284dc309
CRs-Fixed: 869026
Initialize bad peer tx control data structure in WMA,
send down the initial configuration info to fw and
configure the peer status update setting in the tx_rx module.
CRs-Fixed: 975526
Change-Id: Ib380e10a0b343b6a8f9c2c0bf6d6dd602d2601c5
Dwell time can be modify based on channel congestion per scan
request.
Add changes to enable firmware to use scan control flag and select
dwell time optimization algorithm based on ini values.
Change-Id: Iea3de57c1b7d087442e4b8984b4184d24bb8c930
CRs-Fixed: 994443
1.Logging of all WMI activities(commands, tx complete, events)
is adapted for WIN.
2. WIN and MCL continues to use existing approach of memory
allocation and it is managed using feature flag in common code.
3. Use debugfs for WMI event debugging.
example to read buffer through debugfs interface -
- Navigate to WMI directory under debugfs (/sys/kernel/debug/WMIx)
- It will display elements/files for all command/event buffers
- "cat wmi_command_log" (desired buffer name)
- Output will display something like this:
CMD ID = 16001
CMD = d 0 d8c6de24 e1cf
CMD ID = 16001
CMD = 8 0 0 0
CMD ID = 16001
CMD = d 0 d8c6de24 e1cf
CMD ID = 16001
Change-Id: I26895b480b9eaa400183c4667b9ac6980939cab9
Acked-by: Pratik Gandhi <prgandhi@qti.qualcomm.com>
CRs-Fixed: 1019979
Add host support for WMI POWER DEBUG command to control mac_core power features
for run time debugging.
Change-Id: Ifc810b24222507f1445a84a54caa8aee5e815b38
CRs-Fixed: 1007598
Replace the WMI command WMI_SOC_SET_DUAL_MAC_CONFIG_CMDID
and event WMI_SOC_SET_DUAL_MAC_CONFIG_RESP_EVENTID with
WMI_PDEV_SET_MAC_CONFIG_CMDID and
WMI_PDEV_SET_MAC_CONFIG_RESP_EVENTID respectively since
the former are obsolete. The new WMI commands and events
additionally carry the pdev id.
Change-Id: I77eab3ead005bbb7f951ce7e077cd661813cb628
CRs-Fixed: 989502
Replace the obsolete WMI command WMI_SOC_SET_HW_MODE_CMDID with
WMI_PDEV_SET_HW_MODE_CMDID and event WMI_SOC_SET_HW_MODE_RESP_EVENTID
with WMI_PDEV_SET_HW_MODE_RESP_EVENTID respectively. These new WMI
commands and events additionally carry the pdev id and all mac id
references are replaced with pdev id.
Change-Id: If2a3f93dcd1947eedce8d4eac8ed936166f7e078
CRs-Fixed: 989502
Replace mac_id with pdev_id for WMI pdev commands and
vdev start response handler to support multi-radio in
converged firmware. In order to maintain backward
compatibility with old fw, host needs to check
WMI_SERVICE_DEPRECATED_REPLACE service id in service
bitmap and needs to fill pdev id or mac id accordingly.
Change-Id: I7e6b40b4c0bd20e967dc0a383b480068e256486f
CRs-Fixed: 994415
WIN platform uses non-tlv implementation for host to
target wmi commands. Add support for non-tlv
implementation in common wmi layer.
Change-Id: I1f832695b0d41b521be6b18df0cad31aae11b6c9
Acked-by: Kiran Venkatappa <kiranv@qti.qualcomm.com>
CRs-Fixed: 1005778
