Add event to event_list after msm_register_event is successful to avoid
use-after-free vulnerability.
Change-Id: I144ae82c657c1e2cf16608c0e8768b12a7d27974
Signed-off-by: Ping Li <pingli@codeaurora.org>
All sde crtc's are virtual when they are created. Resources for the crtc
is allocated when crtc is enabled. All crtc's will not have same
capabilities because some of the dspp blocks have additional hardware
blocks. Change exposes additional dspp capabilities dynamically when
crtc is allocated the dspp hardware block.
Change-Id: I93e76a1335574e4ca30d9419ef6cc6e8149e2c3c
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
This change updates misr checks so that misr can be
configured during secure display session. In the current
code, misr_reconfigure flag is set only when accessing
through debugfs node.
Change-Id: Ic3a8316a4881551da3f0f340f6ef5ae3fbe4913f
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
Enhance logging in dp mst functions by adding connector ids to
better identify operations for different streams and add more
trace logs.
Change-Id: Iaf5c67105c7af82fc5118674ddde5aef2319a611
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
During cases where vblank callback registration happens during
CWB is enabled and deregistered at point of no CWB, WB encoder
is left with dangling vblank_cb. Added changes to avoid registering
vblank callback on the clone mode encoder.
Change-Id: I62aa12ef453166d2f5558852d924f87841872f37
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
Allow for overriding color processing features that normally uses
DSPP flush to use LM flush instead. This is required on targets
where some of the DSPP features have been tied to LM flush bits.
This changes adds a field in color processing node to track if the
override is needed and enables LM flush override for rounded corner
on target requiring it.
Change-Id: I584bd7b20dfc9fc7795b1b3b10e2f17a82945ce4
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Trusted VM adapts splash handoff path to acquire the same
set of HW blocks the tui display was using in the primary VM
before switching out.
To use the splash handoff path, Trusted VM should add an
additional vote to the PM so that refcounts will be remain
balanced after the splash path cleanup at the completion
of the first valid commit.
This change adds the needed vote and as a result cleans up
explicit voting from trusted vm commit paths.
Change-Id: I9eb33c364f1dfb4205547a8353f57b73c68b8af3
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
When resuming the video session from a source initiated power down, the
dp_display driver is doing a link probe again to override the previous
link information parameters. The link_probe is not accurately capturing
all the sink capabilities resulting in the link getting trained at a
different rate when resuming from a PM suspend or a secure display
session. The HBR3 support is indicated in the extended capabilities
DPCD registers which is not considered in the upstream link probe
implementation.
This change will remove the drm_dp_link_probe function from the DP
driver because it is not capturing the accurate DP sink capabilities.
Change-Id: I3c225cf825c826edd73592b18fae74c8b5b8236c
Signed-off-by: Sankeerth Billakanti <sbillaka@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
This change adds porch calculation support to maintain
constant fps during clock switch for dual DSI controller.
Change-Id: I9a7e6d1f6d028355dba30aafe0234fc30c153059
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Sometimes committed state doesn't contain any crtcs. For example,
fbdev emulation is still pushing null commits to DRM even if the
cable has been plugged out. Avoid flooding the logs in this case.
Change-Id: I6b7f049b80409c4a2ae057839ede6dd8af10d03b
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
dsi_display_init has to be called after dsi_display has valid
device info, so initialize it before calling request_firmware
in dsi firmware case.
Change-Id: Iec59882c776eb4bd19ce68d3ded052629c344d17
Signed-off-by: Ray Zhang <rayz@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
This change adds support to keep display reset pin high during
suspend state.
Change-Id: I8fab43d8f7b30fce72cc95277d016b72b914aa99
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Currently, for Dual DSI Broadcast command, Overflow error
is masked only for master controller. This changes add
support to mask overflow error for slave controller as well.
Change-Id: Ida73c4166e996fcf2c8c936d0c76d0a89a220d89
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
This change adds porch calculation support to maintain
constant fps during clock switch for CPhy.
Change-Id: I74b2f0e064441fba7f452b06438ece7fe3b373eb
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
This change adds support for C-PHY dynamic clock switch feature.
Also add support for phy ver 4.0 C-PHY timing parameters calculation
to be used for clock switch.
Change-Id: I8292860fd8c93a7ba7988ec8c44ea9683f45b6e6
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
As per DSI HPG, Soft reset is not required to disable
video mode operation for version 1.3.0 and later. So,
add check to skip it during display disable.
Change-Id: If6d263bdf22f8a6fbef76d78d04bb9d11be05945
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
As per DSI HPG, pll delay should be 25usec for phy ver 4.0 and
100usec for phy ver 2.0 and 3.0. This change updates pll delay
calculation during dynamic DSI clock switch accordingly.
Change-Id: Ief5cbdc9304cf5ad025fe3bbe689b93834a1f710
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
During clock switch, Pll delay is calculated considering escape
clock to be in KHz. But escape clock is in Hz. This leads to wrong
pll delay calculation.
Change-Id: I616d16cc3d775a37e77c7c35bb860c23b1f9e37a
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Update the DP controller and PHY programming to support different
values for pre-emp and voltage swing levels at different link rates.
Change-Id: I974c47cd1bf71b76dea4f270031a9cdfe320725e
Signed-off-by: Rajat Gupta <rajatgu@codeaurora.org>
Add changes to reserve dsc blocks by routing even numbered
dsc encoders to even pingpong blks and odd numbered dsc encoders
to odd numbered pingpong blks.
Change-Id: I9242b3f7a2784194f9e4a7d30eff6ae3ec16b196
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Add NULL pointer checks, before accessing the controller node.
Change-Id: If24c4fd4352ef5ab7642c817ddaa61a80b725c99
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Fix the check for uneven split across LMs when destination
scaler is used and reject the use-case since this is not
supported by the driver. This can happen if an odd-value
for the horizontal width is being split across 2 mixers.
The existing check was broken since it uses pass-by-value
with a zero initialized value that callee tries to update
while iterating over the DS configurations. Use pass-by-
reference with the previous DS configuration, if available,
instead of just 0 values so the proper comparisons can take
place.
Change-Id: I529faf57e43fb471b28b4d222260ea4d37217d4d
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
A new status register was added in DPU 5.x to INTFs to allow for
confirmation when the timing engine is disabled. This
functionality was controlled via an overloaded feature flag
which is used to enable INTF tear-check ops (also added in DPU
5.x). External displays support INTF_STATUS but have no use for
any tear-check functions. Separate these features so they can be
enabled individually on the interfaces which support them.
Change-Id: Ib8548619cb58bf19b7c02211ead7f33f52ffeae4
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
In current driver, during system cache read mode update control flush
is invoked and there after commit thread is allowed to pick up next
commit. This can lead to improper frame flush and cause hangs or
underrun. This change add a wait till frame done after system cache
update to frame read mode.
Change-Id: Ic88e0bdbaaa1f45f825d40ecde4de9e8dea2efef
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
This change programs rotator sid value irrespective of
continuous splash since it is not configured from
bootloader. It also handles trusted vm support
to prevent accessing mdss hw register.
Change-Id: I80e286364286457545dfa236d629447241d98f95
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
A mode switch on a real monitor can be triggered by forcing the new
mode using debugfs and initiating an hpd_irq. Due to a missing
check for simulator state, the current driver calls the hpd_irq
callback for simulator even for a real monitor. This change adds
this check.
Change-Id: I13480eccd27eac2f9df3dd766d0445c0a5ea9b2c
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
Introduce event logs for lutdma kickoff operations to make
LUTDMA usage more apparent in crash dumps. This will aid in
debugging and triaging LUTDMA issues.
Change-Id: I81b570dfc21b03627cdaf5d9693b786839716571
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Add hooks to dump LUTDUMA debug bus status during dumping
of system debug status. LUTDMA debug bus can be accessed
from userspace via the "recovery_lutdma_dbgbus" debugfs node.
Output control of the LUTDMA_dbbus is managed by the
"reg_dma_dbgbus" node.
Change-Id: Iea011279dd3806f0f594102ce7a5dc018a8d2b7c
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
This change allows dynamic refresh trigger to sw trigger
and mdp intf flush. With this we can make sure that DSI
timing/clock update and mdp intf timings are updated in
one vsync.
Change-Id: Ic807f498e2e47be6dd0f1e11ff1fc0896a8ec758
Signed-off-by: Vara Reddy <varar@codeaurora.org>
