Currently mac address is getting configured as the wow pattern
while the vdev is getting created, configure the mld address also
during the vdev creation so during legacy connection or roaming
between the ml-legacy vice versa there wont be packet drops because
of pattern mismatch.
Change-Id: I9b98649bca132a6665f2e4dd94d9c6b840223827
CRs-Fixed: 3124115
To support shutdown WLAN when system goes into suspend, add idle shutdown
in cfg80211 suspend function.
Before suspend/shutdown, user space should stop adapter. And after resume,
user space should restart adapter. This can ensure user and kernel space
to sync adapter state.
Idle shutdown must be processed in system active, so schedule delayed
work to execute it. After calling schedule, retrun EAGAIN directly to PM.
Change-Id: I08818517d05e7866d50e3f92cfdc9fa1a4d0e63f
CRs-Fixed: 3081480
Add the support for the feature of Full Power Down while
in low power mode.
For this feature, it need to power down wlan chip when
suspend, and power up wlan chip when resume, so need to
change to call wlan driver shutdown and then power off the
wlan chip instead of calling wlan driver suspend when do
suspend, and changing to do power on wlan chip, download
wlan firmware, and calling wlan driver reinit instead of
calling wlan driver resume when do resume.
Change-Id: I293647175c151da0fd6628345f98ea65c83b1bb3
CRs-Fixed: 3061366
In some scenario, it is required to receive every ARP/NS packet even
it is not to solicit address itself. So add this vendor attribute
configuration to enable/disable ARP/NS offload on fly.
On some platform, if target suspend to WoW mode, APF filter will drop
such ARP/NS packet in the front, so prevent runtime suspend happen
if disable ARP/NS offload. System suspend still allow in consideration
of potential power impact.
It only support on STA/P2P-Client mode device, and this configure is
optional, while default behavior is ARP/NS offload enable. It will
restore to default behavior if interface being closed.
Change-Id: Icd49e230024bc1ce51519cd9fafee9bc9f79f382
CRs-Fixed: 3058494
INI item enable_dynamic_pcie_gen_speed_switch is no longer. Hence,
delete all uses cases of it.
Change-Id: I1082620c4354bda48ebc54aae7e72e5a81c4aa94
CRs-Fixed: 3068122
The ini gEnableWoW was designed to enable or disable both magic
pattern match and pattern byte match, but now host ignore the
magic pattern setting from the ini, always enable the magic
pattern instead.
configure magic pattern in line with ini gEnableWoW setting.
Change-Id: I309aff03de9bdbd36fe391784ba54cbfa0cad67b
CRs-Fixed: 3047199
Add support to offload icmp feature to fw in case of
suspended state to avoid high power consumption.
Change-Id: I3ff19d71eac530c75be57e6b52b975e755ff2a53
CRs-Fixed: 3042452
Currently, the bitmap of action frames that can wake up the
host during suspend is sent via the wmi command
WMI_WOW_SET_ACTION_WAKE_UP_CMDID. This bitmap doesn't include
DSCP action frames so currently the host doesn't wake up for
DSCP action frames when in suspend mode.
Enable wake up for DSCP action frame for runtime PM as well
as for wow mode.
Change-Id: I51ba3e8ef52755af25ed922161028dfbaccaa250
CRs-Fixed: 3046595
By default INI item igmp_version_support has value 0x7. Fix the comment
to match with the correct default value.
Change-Id: Iab0caf41b3f3a57873b8cae1188d475adcfe9cc5
CRs-Fixed: 3042427
Add new ini item gEnableIcmpOffload to enable/disable
ICMP offload to firmware.
Change-Id: I107aeec4c75ae18fbe37d373e48339a5b76797aa
CRs-Fixed: 3025650
Currently driver has only one name for an INI, with
this change add second name as well for few INIs based on
new requirement.
Change-Id: I6eee13935d1c5c74794027b88d94cbb572339e9e
CRs-Fixed: 3007209
SAP/GO clients connected D3 Wow feature is only supported when IPA
is disabled and hence add dependency note to display the dependency
between SAP/GO client connected D3 WoW feature and IPA.
Change-Id: Icca4de1082090f5d740acf3b2b449b425b19ffce
CRs-Fixed: 2996992
Add new ini item enable_dynamic_pcie_gen_speed_switch for enabling
dynamic PCIe gen speed change.
Change-Id: I7dde4e40e56bf894c7edd0805d09425444648e6b
CRs-Fixed: 2977079
Due to the limitation on third party platform, add ini to take
special care of the below wow case to avoid fw crash.
The sap/p2p_go shall kick out all the connected sta/p2p_gc and
then go to suspend if d0wow/d3wow is not supported.
Although there is wakelock try to prevent suspend after tdls link
setup, it won't take effect because auto sleep mechanism is not
supported on some third party platform, so teardown tdls link
by force before suspend.
Change-Id: I14bfe32f04cfc34d4f55a09820e42e65a1d9f925
CRs-Fixed: 2935295
Extend hdd_config_modulated_dtim() to configure moddtim
dynamically in the both non li offload and li offload mode.
Change-Id: I8669ec618d4aa9cd87c4c234972ca500c98119b6
CRs-Fixed: 2970090
Currently ucfg_pmo_enable_igmp_offload is conditionally compiled
with feature flag WLAN_FEATURE_BIG_DATA_STATS which may introduce
compilation issue when WLAN_FEATURE_BIG_DATA_STATS is disabled
but WLAN_FEATURE_IGMP_OFFLOAD is enabled.
Fix is to use WLAN_FEATURE_IGMP_OFFLOAD feature flag for
pmo_enable_igmp_offload.
Change-Id: I647ad960f5c0abc14449f0af9430f867ddcdf1e3
CRs-Fixed: 2981344
Sometimes we need PDEV suspend mode, WMI_PDEV_SUSPEND_CMDID and
WMI_PDEV_RESUME_CMDID. But currently design, only support WoW
suspend or not support two choices. And, there are two confused
ini configuration, gDisableWow and gEnableWoW.
1. Add new ini gSuspendMode to set suspend mode. Default 2.
0, does not support suspend
1, legency pdev suspend mode
2, WoW suspend mode
2. Clean gDisableWow. It is replaced by gSuspendMode=0.
HDD suspend/resume function get the value by new API
ucfg_pmo_get_suspend_mode().
Change-Id: Icbeef3df6879ca2054f64e0292e9b9469c4936d4
CRs-fixed: 2940788
Currently in the WoW design of Moselle, EXT GRP IRQs are
enabled before sending SMP2P power save exit message is
sent to the FW. Because of this, any pending IRQs in the
GIC will immediately fire and could race with the SMP2P
power save exit logic. Any access to the registers done
before power save exit would result in system errors.
Enable the EXT GRP IRQs after sending power save exit
command will fix the problem.
Change-Id: I16f580279b5aa24861ab5111b9c13db3e38063f4
CRs-Fixed: 2925554
offload igmp feature to fw in case of suspended state
to avoid high power consumption.
Change-Id: I05fbf23dc2836f8f5dc6e2f45b35bf2d30c39790
CRs-Fixed: 2907644
Set system state in hif ctx to suspend or resume on
system suspend and resume respectively.
Change-Id: If1904a4fe5c861deed1b35071be10cb8cc8d6407
CRs-Fixed: 2899520
As part of WiFi ini clean-up FR, the ini parameter
gDataInactivityTimeout, is identified as it is no longer used
and hence it can be deprecated.
Change-Id: Ic01ba8934058cf2fb3bec042f11b01ea70ef7a3f
CRs-Fixed: 2896042
Any update to the SRNG TP/HP when the device is in low power
state would result in system errors. While in D3 WoW mode,
disable EXT grp irqs and drain TXRX before sending enter
power save mode to the FW. This will ensure that no interrupts
are received while in WoW mode and as a result there wont be any
HP/TP updates.
Change-Id: Ic1fb7fdd45096b458abf5d243fa652c3da878dc0
CRs-Fixed: 2890568
Add vendor command interface/feature through which the user
or vendor can set the dtim count as per their requirement.
Change-Id: I26010948c4ed7e3c49bfe0453119235d4f438c6f
CRs-Fixed: 2894349
Add WMI service FW capability check before enabling D0 and D3
WoW for SAP and GO clients connected mode.
Change-Id: I878e4ee33807804e049bf1e8b8078d28fc1d4834
CRs-Fixed: 2869072
Rename existing INI to enable_bus_suspend_in_sap_mode and define a
new enable_bus_suspend_in_go_mode. Also define new APIs
wma_is_vdev_in_sap_mode and wma_is_vdev_in_go_mode.
Change-Id: If38c4db7b3d1f7323df45d9a7d80a02a44e7ca41
CRs-Fixed: 2864596
By default, PCIe bus suspend is not allowed in beaconing modes
(SAP/P2PGO/NDP) with one or more clients connected. Some OEMs need
PCIe bus suspend in this mode. Hence, add a config item to serve
both types of requests.
Change-Id: Ia2d990f17f605036d43db75ecd4df57701b4ba1f
CRs-Fixed: 2860495
Currently, Stats request commands are sent over qmi right from the
target suspend request is sent to FW. This is leading to a crash in
FW since it is trying to access PCI when it is in suspend state.
To address this, send stats request over QMI only after the ack is
received for the target suspend command.
Change-Id: I1b2b6a60c5d8c7ec4375d328e58a66d749794e3f
CRs-Fixed: 2835903
Currently max value of gEnableModulatedDTIM is 5 which is
incorrect as FW supports maximum no. of modulated DTIM as 10.
To address above issue update max value of gEnableModulatedDTIM
ini.
CRs-Fixed: 2830240
Change-Id: I7f1cab6f0cb2b2a60e7cc1bb37a9971c1752a1bb
On some third party platform, the in-band bus suspend-resume is
not supported well, instead add gpio irq as wakeup source to
support out-of-band suspend-resume.
Change-Id: I7621f04d093013e15719b5c84dc244604be238df
CRs-Fixed: 2815754
Currently pmo_psoc_get_vdev api just returns the vdev without
taking the vdev reference and it is caller's responsibility to
take the reference, there could be a race condition where after
getting the vdev and before getting the reference of that vdev,
some other thread may delete this vdev.
To avoid this issue use objmgr api to get the vdev for pmo.
Change-Id: I3495589e2dbbb7d8efc579a62fff1a08a92c318f
CRs-Fixed: 2771211
Add a new ini item enable_mod_dtim_system_suspend to control the
modulated DTIM on system suspend feature.
This ini is used to set modulated DTIM configuration:
Current values of enable_mod_dtim_on_system_suspend:
0 -> Modulated DTIM will be enabled for every wow entry
(RTPM wow + System suspend wow)
1 -> Enable modulated DTIM only for System suspend wow.
For RTPM wow, the device will stay in DTIM 1 (non-modulated DTIM)
Change-Id: Ia3a9d259d8ba1e483ea3e8e7f99f60bbc27c67af
CRs-Fixed: 2787108
qdf_mem_malloc() function already takes care of logging the
caller function name and line number in case of any allocation error.
Hence there is no need to add the error log again.
Getting rid of these unnecessary logs reduces driver memory footprint.
Change-Id: If0b9425f82f9ed793c7639c0ed09eb1f868b6d5c
CRs-Fixed: 2781932
Qpower config should not be allowed if Qpower config/OPM power save config
is disabled in ini file.
Change-Id: Iff21159f30731f7188506ab5e5e3133d02203b6b
CRs-Fixed: 2778632
Reduce wow suspend/resume timeout to 4 seconds to accommodate
lower DPM WD timeout values. WoW suspend/resume timeout value
should be less than DPM WD timeout.
Change-Id: I481ae544de0d26b49bcc0f5c4d4a384693707a5b
CRs-Fixed: 2730955
Remove wowlan_deauth_enable and wowlan_disassoc_enable INI params as
these are unused
Change-Id: I90d10995365771359f1bcd029b9193437ad67a18
CRs-Fixed: 2678156
WLAN_FEATURE_NAN_DATAPATH is deprecated and the define is also
removed. But there is still some code(NDP wakelock event
configuration) which is guarded in this flag and it never gets
compiled. So replace WLAN_FEATURE_NAN_DATAPATH with overall
NAN feature define WLAN_FEATURE_NAN and move it to a separate
API.
Also, enhance log to print the complete 16-byte bitmap in hex
format.
Change-Id: I1ad51efc2b6a088022601686744802995fb7b4b7
CRs-Fixed: 2679286
gEnablePowerSaveOffload is confusing, so change it to
gAdvancedPowerSaveMode.
Value 0: Disable advanced power save
Value 1: Enable advanced power save
Change-Id: Ib5593ef31eedacdc232ffbad183974e2cd847e83
CRs-Fixed: 2676664
Currently the bitmap of action frames that can wake up the host
is sent via the wmi command WMI_WOW_SET_ACTION_WAKE_UP_CMDID.
This bitmap doesn't include RVS action frames so currently the
host doesn't wake up for rvs action frames.
Enable wake up for rvs action frames during runtime.
Change-Id: I9fac8e74cdb7b529f858f7f2027906ca2b3083b3
CRs-Fixed: 2649927
If resume and fw wakeup happens at the same time.
psoc_ctx->lock maybe doing bottom half operation for resume,
then wakeup interrupt comes on same cpu, the interrupt
handler will also acquire psoc_ctx->lock in
pmo_core_update_wow_initial_wake_up, which cause dead lock.
Using atomic for wow_initial_wake_up, so the interrupt handler
can avoid using spin_lock.
Change-Id: Id0e963a0924415e9660c57a1c1b776d3e609213d
CRs-Fixed: 2624899
Scan cmd still can be exist after scheduler thread is suspended
when host suspend, the scan cmd can't be removed from
serialization list by either complete or cancel any more since
both depends on scheduler thread, suspend thread blocked 30s to
wait scan cmd cleared.
Roam sync event from F/W can't be handled and Roam sync complete
can't be sent to F/W since scheduler thread suspended, then F/W
assert for roam sync cmd timeout.
After receive F/W down event, host will try SSR, but blocked by
unfinished suspend thread too.
Fix: suspend all components including scan before suspend
scheduler thread, make sure scan cmd is cleared and no new scan
is allowed any more before scheduler thread suspended.
Change-Id: I7a3badeedea018e4d92bbe8660692e42923852aa
CRs-Fixed: 2620650
Currently cdp ops are given pdev/vdev/peer
handle as its arguments which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
- txrx_data_tx_cb_set
- txrx_mgmt_tx_cb_set
- txrx_mgmt_send_ext
- txrx_pdev_attach_target
- txrx_pdev_detach
- txrx_vdev_attach
- txrx_vdev_register
- txrx_vdev_detach
- txrx_peer_create
- txrx_peer_delete
- txrx_peer_delete_sync
- txrx_fw_stats_get
- txrx_get_vdev_from_vdev_id
- txrx_pdev_set_ctrl_pdev
- txrx_pdev_attach
- txrx_get_vdev_mac_addr
- txrx_pdev_post_attach
- txrx_pdev_pre_detach
- txrx_get_ctrl_pdev_from_vdev
- txrx_get_mon_vdev_from_pdev
Change-Id: Ib8b0b1edd63e7c3f8813b11ca26b50ec121fe255
CRs-Fixed: 2541459
Currently the offloading of the NS and ARP to firmware is inefficient;
redundant caching is performed even if offload is not sent. This causes
wastage of resources and increases code complexity.
Introduce checks before caching and offload to ensure that the mentioned
inefficiencies are taken care of.
Change-Id: I6013810e1e08adb15c801f4fc21e1b50371bacda
CRs-Fixed: 2569763
