Host need to fill netbuf with qtime instead of tsf.
This function already realized in Change-Id
"Ib19ac1411c4e17624c012f188297c9f2122642d2".
But it only support STATION RX mode. add the similar
action for SAP RX mode.
Change-Id: Idb3f9da5488b19db48e96258ecb4539b5af3c9a6
CRs-Fixed: 2483566
As per existing design, dp rx mic error information is
posted to HDD via SME. HDD inturn indicates the mic error
to supplicant.
Define new HDD callback hdd_rx_mic_error_ind for
rx mic error, registered through the CDP API
cdp_register_rx_mic_error_ind_handler. This will
enable datapath to directly post mic error info to HDD,
eliminating processing by corestack.
Change-Id: I6561dc5e66e7059c249c1eeeabdbf754989221d2
CRs-Fixed: 2488455
Post rx mic error information to HDD via new HDD mic
error callback(hdd_rx_mic_error_ind) registered to
.rx_mic_error member in dp_ol_if_ops.
Change-Id: Ia1e2b78a94dddba48937995ecf62fb5a7ae4139d
CRs-Fixed: 2488452
rx mic error information is now posted to new HDD mic
error callback(hdd_rx_mic_error_ind) via .rx_mic_error
member in dp_ol_if_ops.
Cleanup the dead code left behind.
Change-Id: I32fd135506382c085755e25cab5af86824cea511
CRs-Fixed: 2488464
Issue:-
Sap does not restart when unsafe
channel event comes, due to the acs mode
flag not set though acs happened.
Scenario:-
Turn on STA on channel number 1.
Turn on SAP on 2.4ghz band.
Make the channel number unsafe.
Observation:-
Sap fails to restart.
Expectation:
Sap should restart on some other channel.
Fix:-
Set the flag before the driver returns the
best channel as the STA channel.
Change-Id: I2cf2f5d3096da04f3c43969b7405b81c743fe2e2
CRs-Fixed: 2492087
While processing vendor command: GET_PREFERRED_FREQ_LIST respective
handler __wlan_hdd_cfg80211_get_preferred_freq_list() do not validate
pcl_len received from policy_mgr_get_pcl() which can be zero when
current regulatory domain is ETSI13 based, gindoor_channel_support=0
and etsi13_srd_chan_in_master_mode=0.
If pcl_len is zero then invalid index is computed in
wlan_hdd_populate_weigh_pcl() when trying to access
chan_weights->weight_list[pcl_len - 1].
To fix this, add zero length check for pcl_len before accessing
weight_list[plc_len - 1].
Change-Id: Ie8bf52fe289634efc104ca674d70fcd1beb6c304
CRs-Fixed: 2492630
Add op_freq in tagCsrRoamConnectedProfile. Finally remove
operationChannel from tagCsrRoamConnectedProfile in next
few changes.
Change-Id: Ie9be4b59483412866d915448b33f8cb6cc9e2d7c
CRs-Fixed: 2489893
Send the current reject ap list to FW so that the FW too
updates the same in there database to enable roaming if
any AP is removed from the list.
Change-Id: I9c0176a2c4ae970e454f03b577f6fc98af5b62de
CRs-Fixed: 2489448
Currently btm offload command is sent to FW as part of RSO Start
for all type of roam req reason and btm offload disable command is
sent to the FW as part of RSO STOP. In case of STA+STA concurrency
case, while btm offload is enabled for the 2nd
STA after UPDATE_CFG sent for STA1, the FW asserts because it has btm
offload enabled for STA 1 while UPDATE_CFG and has not deconfigured
it yet. Send btm offload enable command as part of RSO Start in case
of roam_req->reason == REASON_CTX_INIT only to the FW so that it
configures btm for the currently enabled STA only in case of INIT
and re-configures for the second STA without assertion.
Change-Id: Ib146072c7cd0543ea82122702d6585d1d2a2e2d1
CRs-Fixed: 2493122
Add op_freq in csr_roam_profile. Finally remove
operationChannel from csr_roam_profile in next
few changes.
Change-Id: I7a3d7fe7e77b18424f487429aaa19ca1a97b8aba
CRs-Fixed: 2489914
Prepare to replace channel id with channel frequency of struct
bss_description, first cleanup reference of channel id of struct
bss_description in lim_api.c csr_api_scan.c csr_host_scan_roam.c
csr_roam_preauth.c csr_util.c, use channel frequency instead.
Change-Id: I86864c73c429c52399819532cd9b957f66ed94f0
CRs-Fixed: 2491406
Currently, QDF_STATUS_SUCCESS is always sent for MGMT
Tx frames to packetdump.
Send the proper Tx status for MGMT Tx frames which is
mapped to packetdump tx status.
Change-Id: I7a780777910a5b9220ebb77cda1e0c4acd9f45b2
CRs-Fixed: 2490243
When wifi is turned off, system suspend might occur during the timer delay,
which would stop the timer and prevent wifi from being turned off, leading
to battery drain. To fix this issue, prevent the suspend and turn off the
wifi before allowing suspend to happen.
Change-Id: Id4fbb13f3ab350b4e2545f65e38d9baaba5ed7ab
CRs-Fixed: 2493487
There is no need to do DRV suspend if gPreventLinkDown ini flag is
set. PCIe link will be always up.
Change-Id: Ie6344514486634e1b6ae3b4a4e416853f8d46e5a
CRs-Fixed: 2492053
As a part of the change I3cd617e52e86e2a890e35edb33b37ba3df8f4f6e
the max value of the ini gEnableDynamicDTIM was changed from 9 to 5.
This change causes regression where DUT is not entering in to DTIM9.
Restore back the max value of the ini to 9.
Change-Id: Ifea0c5199951a0dffc5cd116ec4c065f1563fe94
CRs-Fixed: 2489494
Enter and exit prints are called everytime, causing excessive logging.
To reduce the amount of logs printed, remove the enter and exit print
statements from dsc _dsc_psoc_op_start and _dsc_psoc_op_stop.
Change-Id: Iec53285d0c39243edd6577c57c9d0b15769e1230
CRs-Fixed: 2491091
Enable macro DP_RX_PKT_NO_PEER_DELIVER to deliver some RX pakcets
like Eapol even if there is no related peer found, this is
needed for the LFR roaming case.
Change-Id: Ia732c6448319bca122d405d25f2af410df0f4d68
CRs-Fixed: 2491507
New added header file target_if_pub.h is introduced due
to remove void usage for objmgr module, add include path
for this header file to compile.
Change-Id: I4f79e6d3213941b86fbadd42934cd355bcd0a511
CRs-Fixed: 2488101
Add curr_op_freq in pe_session. And finally remove
currentOperChannel from pe_session in next few changes.
Change-Id: I2529a1637299b8dacf7fa6e2a81db851584453ee
CRs-Fixed: 2489613
Kernel maintains a list of bss and it adds/updates the bss
entries whenever driver informs it. When driver receives
beacon or probe response from any ap it informs kernel to
update the bss list and whenever it disconnects with the
AP driver unlink the bss in the kernel.
If the AP is hidden, when driver gets beacon from this
hidden AP it informs the kernel to update the bss list.
kernel add this entry to it's bss list with NULL SSID.
Now when driver receives probe response from this hidden
AP it again informs the kernel to update the bss list,
as this is probe response and ssid is not hidden,
kernel treats this entry as new entry and adds it to
its bss list and links this entry to the older hidden
AP entry (But still these are two entries for hidden AP).
When driver gets disconnect from the AP it unlink the
bss entry corresponding to this AP from kernel's bss
list, but since there are two entries for the same AP
as the AP is a hidden AP, driver should clear hidden AP
entry (Which was added as part of beacon) which is
not happening currently.
Now when AP moves from hidden to broadcasting SSID
in it's beacon, kernel drops this beacon entry as its
confusing because there is already a beacon entry with
hidden bss for this AP. During connection driver tries
to update the entry in the kernel and it fails as kernel
drops the beacon resulting into the connection failure.
To resolve this issue, whenever driver unlink the bss
entries from the kernel bss list unlink the hidden bss
entries also from the kernel's bss list.
Change-Id: I03a8517878b3db769bf28a157579179e1dd762e2
CRs-Fixed: 2488887
For some branches, we disabled BUILD_DEBUG_VERSION, to avoid compile
issues, add macro for new function which only will be used at
QDF_TRACE().
Change-Id: Idd0bb3a98ef92b837e14bd4e8e3c374b1b6a7e58
CRs-Fixed: 2492501
