The target advertises adaptive 11r service capability over
WMI_SERVICE_ADAPTIVE_11R_ROAM. Enable RSO for adaptive 11r
connection only if firmware advertises this service capability.
Change-Id: Iea78b63d19d1177fe092fc9916ddc5280d00de4b
CRs-Fixed: 2441975
Adaptive 11r is a feature by which the network supports 11r
even though the bss doesn't advertise 11r. This is done with the
help of advertising vendor specific adaptive 11r IE and MD IE
in the beacon/probe. When vendor specific adaptive 11r
IE (oui 0x00 40 96 type 0x2C) is present in the beacon/probe,
and 1st bit of the IE data is set to 1, then the BSS supports
adaptive 11r.
The BSS advertises, non-11r akm in RSN IE and user space will
send the 11r akm in the connect start. So the scan module
shouldn't filter out the candidate adaptive 11r supported BSS
with AKM mismatch reason.
Add changes in scan module to parse the Vendor specific adaptive
11r IE and copy it to the scan_entry ie_list. Check if
negotiated akm is non-11r akm, and the filter akm sent from csr
is a 11r akm (which is received from user space), then mark the
bss as matching.
Change-Id: I65f32c67016ad634f1592a7453e77aaf0c5a327c
CRs-Fixed: 2431074
Peer stats struct members initial value 0, so when other functions call
to update peer stats have 0 rssi value which updates mininum
rssi since its the least value. So initialize the rssi with invalid
value initially
Change-Id: Ife033598c7ac47a9a26595f97bff058570d3e91f
CRs-Fixed: 2403735
Add target specific HW header for ipq6018 compilation.
Remove the 8074 header dependencies for 6018 compilation.
Change-Id: I8e45e3e039a4596c6722538405dcd381918fa6b1
Adrastea compile flag is not needed for wlan log to user
time stamp add API because current day of time is expected
to be logged in driver log for all cases.
Change-Id: If04dc54ef35db6d66da9a69a1c7d502873009553
CRs-Fixed: 2444852
wlan_vdev_get_bsspeer() return bss peer without taking the ref count
of the peer and thus if peer is deleted after wlan_vdev_get_bsspeer()
returns a valid peer, the caller will have stale entry of the peer.
Thus add an API to get the BSS peer and increment the refcount if
peer is valid. With this the peer won't be deleted till the caller
release the ref count of the peer.
Change-Id: Ifb3b4de54f3aace359a35a821265c80119df1f50
CRs-Fixed: 2444996
CCE stats are reported across rings today. Since HKv2 is a SMP, it
creates the possibility of missing stats when two or more CPUs are
updating the counters for the same protocol type. In order to avoid
this, we can either use locks or store stats on a per-CPU basis.
Since tagging happens on the core data path, locks are not preferred.
Instead, we use a per-ring counter, since each CPU operates on a REO
ring. Exception packets today go to Ring-0 (also normal rx Reo-0
go to Ring-0). Hence tags are maintained separately for exception
ring as well.
Change-Id: Ib01934619fb026bf64a8ac998eaec2d4df7f5a6e
CRs-Fixed: 2438143
Today Driver and applications maintain a separate copy of
spectral config definitions, which is error prone. Solution is to
expose the definitions via a header file from driver and include
them in all applications using Spectral.
CRs-Fixed: 2432011
Change-Id: I107c2db05e1cb71b379d6f15a282a889882da2f8
The file cds_if_upperproto.h is now removed from qcacld-3.0
project and hence remove from including this file.
Change-Id: I8a9974e70bf71916911b994e058b9892c4b5725d
CRs-Fixed: 2436678
Today Driver and applications maintain a separate copy of SAMP
message definitions, which is error prone. Solution is to
expose the definitions via a header file from driver and include
them in all applications using Spectral.
CRs-Fixed: 2431820
Change-Id: Icf7e6d6bfa1e7bfaa1f2cb4756e69edbac6bfb33
Observed that when IPA offload is enabled, RX packets
are not routed correctly to IPA ring. Currently only
IX0 of REO_DESTINATION_CTRL_IX registers are remapped,
which only covers 3-bit reo_destination_indication of
range 0 to 7.
Fix is to remap REO_DESTINATION_CTRL_IX2|3 registers
so that reo_destination_indication of range 16 to
31 can also be routed REO2IPA ring when IPA offload
is enabled. Upon IPA offload is disabled, save values
of IX2 and IX3 are reset back to HW.
Change-Id: I3428b450ab10076d27c7628a3729e8cec088bd94
CRs-Fixed: 2434331
Revert change "Limit maxinum nss number as 2 for MCL platform" and
align with WIN function: hal_rx_msdu_start_nss_get_8074v2().
besides, only increase rx.nss[NSS - 1] when NSS is > 0 and rx packet
type is 11N/AC/AX.
Change-Id: I0a64f00a3d252c806216cc3196e71290f111c88a
CRs-Fixed: 2429329
Currenlty RX buffer mappings to IPA domain are released when
REO2IPA ring are disabled but before IPA pipes are disabled.
There will be chances that IPA still accessing buffers with
mappings released, which could lead to SMMU fault.
Fix is to release SMMU mappings to IPA domain until IPA pipes
are disabled.
Change-Id: I62ac99e6a9b83cfd1e70a17ffacdea3ca3720a5c
CRs-Fixed: 2436812
Currently 1024+ is the number of peers, increase it to be 1536+,
(512*3) as the three radio soc supports 512 clients per radio.
Change-Id: I5f1d69206c536bb706825fbd70736dce21b64161
CRs-Fixed: 2436434
Deadlock happens when control path takes scn_lock and calls
cdp_peer_delete() which in turn tries to acquire vdev_list_lock.
If other core starts handling peer_unmap and holds vdev_list_lock
and tries to releases reference of control peer, which in turn
tries to acquire scn_lock leading to deadlock.
Pass vdev object intead of vdev id to dp_reset_and_release_peer_mem
which will avoid need for vdev_list_lock and fix thhis deadlock.
Change-Id: I805bb4958b9b5ec4b29d70ba67e7410572201a60
CRs-Fixed: 2426717
Replace qdf_bug by error log becasue when using wow unit test
framework its very common for higher layer components to send wmi
commands and in this case WMI should fail the request rather than
asserting.
Change-Id: Ie09e4b6014468bcd6b5d75e7f64a78d069855f4f
CRs-Fixed: 2442275
Add dummy implementation of CP stats PMO handler in case
QCA_SUPPORT_CP_STATS is not defined.
Change-Id: Ibe6fe863b0aa31bfda4431887a4f9dae5e74ae69
CRs-Fixed: 2439858
The packet logs show in console logs which are redundant.
Change the log level from qdf_print to qdf_debug to avoid
excessive logging.
Change-Id: I2a43a0072bb7f940df007a590013e500ddda5e8a
CRs-Fixed: 2437278
In send_log_supported_evt_cmd_tlv, events_logs_list in
wma handle is freed if previously allocated. If the
num_of_diag_events_logs exceeds the max size, we exit
from the function early without allocating memory for
events_logs_list. This can result in potential double
free scenario if we receive another DIAG_EVENT_LOG_SUPPORTED
event from firmware.
Fix is to set events_logs_list pointer to NULL after
freeing memory.
Change-Id: I9d6148dfc064d87e2947d1b5ec4492c08913dd4c
CRs-Fixed: 2433802
Update the commment sections in function
scm_req_update_concurrency_params and
wlan_util_get_mode_specific_peer_count.
Change-Id: I076beddacb6efa10f78a1d850f9b74886e9cdcdc
CRs-Fixed: 2439552
Add stop_th and start_th for QCA_LL_TX_FLOW_CONTROL_V2 disabled
platform, which is pdev based tx_desc pool. Change pdev tx_desc pool
size from 1056 to 900, default stop_th is 15% start_th is 25%, this
setting is exactly same as QCA_LL_TX_FLOW_CONTROL_V2. Pause netif tx
queues for all vdevs when stop_th reached instead of dropping frames.
Reduce pdev pool size could significantly reduce firmware wmm drop. Both
of host and firmware frame dropps lead to bad TCP throughput.
Change-Id: I77daf8c9fdef624f8ec479885b7705deb1fef142
CRs-Fixed: 2437471
Add a sanity check to avoid sending a htt
txrx_stats request with an invalid mac_id
parameter to firmware.
Change-Id: Iae980bbffdcf6759b6d467849c5ebc65628f17ba
Crs-Fixed: 2438693
Rate limit sig/tag mismatch related Spectral logs
so that it doesn't effect the stability of the system.
CRs-Fixed: 2433581
Change-Id: I860089419836f1a6203abe0be5df62eab9dd546b
Add the rate limited variants of the QDF trace based logging functions
for Spectral. These include the sub-variants with and without
file/line information.
Change-Id: I56be5dcdfb070e8212c4e9a7e1c1140bfdfaae05
CRs-Fixed: 2426985
Currently frames will be dropped if it arrives before
peer is registered with data path module by control path.
So cache rx frames and flush them to the upper layer when
peer is registered at data path.
Change-Id: I086122fffdcf33e25ba57774ef944550cdd2fa20
CRs-Fixed: 2329308
Increase response timer timeout for Vdev delete response and
Vdev stop response as these take longer when KASAN is enabled.
Value is being increased from 2 secs to 3 secs after it passed
wifi up/down, load/unload for a period of ~10hrs.
Change-Id: I1884370bbc214683a238d0028c4fc26bba6c2ccb
CRs-Fixed: 2441815
This patchset fixes following build errors with
CONFIG_SLUB_DEBUG_ON=y on sdxprairie.
qdf_types_test.c:111:2: error: this decimal constant is
unsigned only in ISO C90 [-Werror]
qdf_types_test.c:199:2: error: this decimal constant is
unsigned only in ISO C90 [-Werror]
Change-Id: I9379eb2754b95ef3a03ed2369d972fdf3ea46322
CRs-Fixed: 2433430
Currently in the case of concurrent sessions running,
the driver updates the active dwell time for the scan
request to the default value, overwriting the already
filled active dwell time which the DUT got from the
AP as part of RRM request, which results in violation
of protocol.
Fix is to not update the concurrency params if the scan
request is of type RRM.
Change-Id: Ifbb4b45fc111851f544fd39187e4113bda5f7348
CRs-Fixed: 2436893
With this feature, using appropriate commands, link layer, network layer,
transport layer and some of the application protocols can be tagged with
the user provided tag values for easier identification of protocols. The
supported protocols today are as follows.
ARP, DHCPv4, DHCPv6, DNS over TCP (v4), DNS over TCP (v6), DNS over UDP
(v4), DNS over UDP (v6), ICMPv4, ICMPv6, TCPv4, TCPv6, UDPv4,
UDPv6, IPv4, IPv6, EAP.
Receive packets are tagged by hardware. Tags are applied after the first
matching rule. Hence it is recommended that the rules are
programmed in such a way that tags are configured from application layer
to data link layer to get expected results.
Change-Id: Ibdc2bd2b78234f482074955e89fb93f05988eaca
Currently there is no support to update tx stats for
non-qos frame. Update tx stats for non-qos data frames
Change-Id: Ib61dd6e3b0c676b5af806c4b1e5cca22ea6ffaa5
CRs-Fixed: 2421925
When polling mode is enabled, send completions for a
CE(host->target, ULpipe) for a particular service(WMI/HTC/HTT) are handled
only when recv happens in CE(target->host, DLpipe) for the same service.
Since for services like WMI there are multiple ULpipes(Eg. CE3 for
WMI<WMAC1> and CE7 for WMI<WMAC2>) and single DLpipe(CE2). Receive on a
DLpipe is the right time to poll for send completions on all ULpipes for
that service.
Change-Id: Ie2ac30d3db1bc85c888d714b782a894539e399ff
Memory optimize for QCS403 platform, 1x1 chip. Reduce CE1 htt data
dest ring buffer from 512 to 256, reduce CE2 wmi dest ring buffer from
128 to 64, reduce CE9 & CE10 desg ring buffer from 512 to 64, disable
CE11 pktlog. Note: this change only affect specific WLAN build config for
extremely saving memory, for debug purose, there is another build
selecting default WLAN config for reference HW.
Change-Id: I868e74b09cdb11df3dccaa3f9e051da55724983d
CRs-Fixed: 2432632
FW assigns the pdev_id to lmac_id mapping for each platform(HK, CYP, etc).
This information is passed on to host via WMI_MAC_PHY_CAPABILITIES tlv.
Instead of hard-coding the mapping again in host, use the info sent by FW.
Change-Id: I01ad81e97a1b4aa1f0fea3951f6e8285a0f0c039
Host driver sends pmk key over psk_msk buffer on the
wmi_roam_11r_offload_tlv_param fixed param.
For SHA 384 based FT AKMs, the xx_key length will be higher than
32 bytes. So new psk_msk_ext array is introduced at interface
to sent the remaining 16 bytes.
Fill the last 16 bytes of xx_key to psk_msk_ext for FT
sha384 based AKMs.
Also add support for FT-SAE, FT-SuiteB and FT-FILS firmware
service capability also. If the firmware doesn't advertise
support for FT-SAE or FT-SuiteB or FT-FILS, firmware roaming to
that AP will not be enabled.
Change-Id: Ibe64fb346a24962e59ca461c3099270d8766adc5
CRs-Fixed: 2400773
Currently we are upadting sojourn stats for all tid.
but rate stats maintains stats for only data tids 0-7.
updating stats for tid value exceeding 7 is leading it to
assert.
Update correct tx rate, rx rate and sojourn stats.
Change-Id: Ib2f5791aa7b8e85aac6283c46f58ce7e821a559b
CRs-Fixed: 2428648 2429575 2429575
Refactor the code to move the serialization of
rx reorder queue setup wmi command to target-if
layer.
CRs-Fixed: 2431099
Change-Id: I6b383f5e875fec55c3586dfee576894f6eb35f73
qca6018 support max 80MHz.
Skipping the check to return success for 160 and 80_80.
So, these values can be updated from fw capabilities.
Change-Id: I3c846a343b74251521b978c4569204ad2f4aadcc
After NOL timeout, if ETSI PreCAC is supported, add the HT20 Channel
to ETSI PreCAC Required List. Also, move NOL detach after ETSI PreCAC
detach to avoid channels being added to ETSI PreCAC Required List when
NOL expiry happens after ETSI PreCAC detach.
Change-Id: I9cdb359eb6905f4f4cfb9d1c784865af0bf39119
CRs-Fixed: 2403489
Add command support for NAV register update and
configuration of the threshold value.
Change-Id: Idbdb030f75dc98db652e6b53604a3ceaaff1106b
CRs-fixed: 2389803
Presently even when the ready event legacy callback fails in
creation of the pdev, the error is not propagated correctly. This
can result in accessing the invalid memory.
Check the legacy cb return status and update wmi ready status to
false in case pdev creation fails.
Change-Id: Ia4f94154357debedc94b4b20e789bff80a4047f7
CRs-Fixed: 2426611
Support WDI 3.0 SW path intra-bss forwarding. Major
difference for WDI 3.0 is the metadata info passed
from ipa driver in skb->cb[].
Previously intra-bss fwd decision is done by FW and
it passes fw_desc to IPA where IPA driver passes onto
WLAN driver. Now for WDI 3.0, FW is not involved in RX
path and SW path intra-bss fwd decision has to be done
in wlan driver.
Change-Id: Ibc2246620490905fd992a2df31cc6f241cc63592
CRs-Fixed: 2432831
Currently when an RRM scan is issued for beacon report request from the
connected AP, we use the current scan country code to get the op class
table for the country.
However, the AP can specify which table to use in the country IE's 3rd
byte of the country field which is not parsed and stored in the scan
country code.
For RRM Scan for beacon report request, use the 3rd byte to get the table
number from the connected AP's beacon and if no table number is present,
then use the op class table based on the country code.
Change-Id: I0911ac908d1c71676f7c1450ab260eaa732ddcb9
CRs-Fixed: 2432662
Currently vdev deletion happens as a part of last
peer's unma and vdev creation happens in a different context invoked
by the upper layer in dp_vdev_attach_wifi3.
In a scenario when the old vdev is being deleted and a new one is being
created, with the same vdev id (e.g. P2p -> SAP transition), its
possible that the old and new vdevs co-exist in the pdev->vdev_list
at the same time. In such a case, the API (get_vdev_from_vdev_id) can
return the old stale vdev, even when a new vdev has been created. This
is not the expected behaviour.
Check for "delete.pending" flag before returning the vdev. If the flag
is set, skip that vdev.
Change some logging to dp_ logging functions.
CRs-Fixed: 2432430
Change-Id: Icadd84059dfbab12910678e5b24007010c15b6a8
Print OFDMA tx and rx rate stats received
from firmware as part of txrx_stats 9.
Change-Id: I081016480bdb0d161e33be7ee789497c43ad6cc0
CRs-Fixed: 2415731
