Few NAN/NDP logs are redundant in the current logging infra.
Optimize the same and add few necessary logs.
Change-Id: Ie261db317af48955a16269539948ff1596c4bbcb
CRs-Fixed: 2644418
The max ini params for mws_coex_pcc_channel_avoid_delay and
mws_coex_scc_channel_avoid_delay are set to be at 0xFF. This max value
doesnot correspond with the actual max value needed by the firmware.
Change the max value to include upto 0xFFFFFFFF
Change-Id: If88d7866c584abf43a41b0c6b9f63b21a0a4a2f2
CRs-Fixed: 2632517
Check the supported bandwidth capability bits to set the
160MHz and 80p80MHz mcs map in HE capabilities that are
configured to FW.
Change-Id: If7ff882a99650f9771b77dc28adf9ebcbf64a00c
CRs-Fixed: 2625166
Currently the hotspot fail happens if the roaming is in
progress because of the check in start bss.
Ignore it and just do disable roaming to the FW.
If the roaming was in progress, it would disable it,
or it would do a disconnect if the EAPOL was in progress.
This is done to enable the hotspot as connect would be
taken care by the supplicant automatically, but the hotspot
needs user intervention.
Change-Id: I0030f9affe60c064d490795be92ae035923738aa
CRs-Fixed: 2640136
Presently in the driver, the function __cfg80211_stop_sched_scan
clears rdev->sched_scan_req only when the sched_scan_stop returns
success. If it returns a failure, then its next invocation due to the
clean up of the second interface will have the dev pointer corresponding
to the first one leading to incorrect memory access.
To resolve this issue, return 0 for stop_sched_scan irrespective of the
return status.
Change-Id: I129e3e9c6d9f6a688d0aa97be120ba9731e8df37
CRs-Fixed: 2623160
When AP rejects assoc request based on poor rssi
host will put the AP in blacklist mgr list, only when
rssi value improves by threshold value,should the
STA try to connect to AP.
Change-Id: I78009b89ea07afdd5f3381973a9eb7ec1f73d1b5
CRs-Fixed: 2632015
If there is no STA/P2P CLI on same MAC of SAP/P2P GO,
SAP/P2P Go needn't switch channel to force scc.
Change-Id: I529a57f73f529e41b8c0097fccabbe3e0e516993
CRs-Fixed: 2643106
Check if any interface is up and if no interface is up
do not add monitor mode.
Change-Id: I2e1218a14881f597885334c0a195758ed35c5e5b
CRs-Fixed: 2644285
mibstats_lock is a global variable, current it init
per adapter, so it will fail when init at 2nd time.
Make sure it only create once.
Change-Id: Ia8a57d049fabe311d5b353b5aa612ffa225cbc61
CRs-Fixed: 2643396
In pe_disconnect_callback(), while processing deauth/disassoc
frame received after emergency deauth roaming failure, the
reason code is extracted before stripping the ccmp iv, mic trailer
from the unicast frame and mmie is not stripped in case of broadcast
deauth frame. This results in incorrect reason code passed to
userspace.
Strip the ccmp iv, mic trailer from unicast deauthentication/
disassociation frame and strip the mmie from the broadcast
deauthentication/disassociation frame.
Change-Id: I07d7b4515471150d74d796ed6da2f87a928e6e35
CRs-Fixed: 2634822
sap_ctx->csr_roamProfile.op_freq is already channel frequency.
Do not call wlan_reg_legacy_chan_to_freq for it.
Change-Id: I20ce4eb8852087175c0fae4a7a9dd5e3168e1f24
CRs-Fixed: 2643218
Enable IPA SMMU S1 translation feature flag for
Lahaina target.
asm/dma-iommu.h file is removed in latest 5.4 kernel,
resulting in include failure. Remove as it is unused
for version 5.4 and above.
Change-Id: Ie2147f2fc2debad4d700fae5414d1d3becb28f13
CRs-Fixed: 2638580
To specify interface index in vendor event for sub command
QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO_INDEX, pass wdev pointer
to cfg80211_vendor_event_alloc().
Change-id: Ied973df111359bbab44e2c1de0888a67e1497034
CRs-Fixed: 2644349
Currently there is no check to not start unsolicited timer
if its callback is already in process. If once this timer
expires and callback is invoked, and if this timer again
tries to start before the callback completes there is no
check to prevent this timer from starting.
As the callback of the previous timer expiry is already in
progress, there is no need to start the unsolicited timer
again. To address this issue a check is added before starting
the unsolicited timer to validate if the callback is still
in progress.
CRs-Fixed: 2635740
Change-Id: Ib008562be22356c3a286fab49a61f99d6867c54e
Currently, In function hdd_get_roam_scan_ch_cb memory
is allocated for event response buffer for invalid len.
Fix is to add a validation check for len before alloction
of memory to avoid memory allocation for invalid len.
Change-Id: I14cffdace868fc19358322c36dd2589d7845b8fa
CRs-Fixed: 2640114
PMF capability information is not available in NAN peer station
data structure as host does not get full capability information
of NAN peer hence WEP bit is not set in addba response frame for
received addba request frames with WEP set.
Set the WEP bit in addba response frame if the received addba request
frame has WEP bit and it is from NAN peer station.
Change-Id: I9f0a02492b3087d0fd53a7bdde273601913ee2ca
CRs-Fixed: 2638789
Kernel 5.2+ is checking vendor policy attribute even for GET commands.
Add dummy policy attribute to following GET vendor commands:
QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS
QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET
QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI
QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS
QCA_NL80211_VENDOR_SUBCMD_GET_FW_STATE
Change-Id: I354b2de86909142ed3db0fb4a4d1545ac2b37d55
CRs-Fixed: 2639687
Host uses target_resource_config structure's "nan_separate_iface_support"
while copying resource configs in WMI_INIT_CMD.
Value of "nan_separate_iface_support" is set to 1, if firmware capability
"vdev creation allowed = 1" and "ini gEnableNanSupport = 1".
Host updates "nan_separate_iface_support" while processing an event
"WMI_READY_EVENTID" which comes after WMI_INIT_CMD send to firmware.
To update proper value of "nan_separate_iface_support" in resource
configs of WMI_INIT_CMD, host updates "nan_separate_iface_support"
while processing an event "WMI_SERVICE_READY_EXT_EVENTID".
Change-Id: I677d9e39e20646dd4ce945f166b86947d82751e2
CRs-Fixed: 2642139
Currently in the driver there are places from where recovery is
initiated. Some of those are not required as logic around them has
changed.
Remove those cds_trigger_recovery from places where it is not needed.
Change-Id: Ia5a0fa60101e1c9f44077daa83c4a20d18893c0a
CRs-Fixed: 2628691
Currently MAX values of INIs gSarSafetyReqRespTimeout
and gSarSafetyReqRespRetry leads the callback api
to execute for more than 10 seconds which is not as per
driver's scheduler design.
To avoid above issue update above INI values to limit
the execution of the callback api to execute for less
then 10 seconds.
Change-Id: Icdeaf360754b2e86119251cd66c4e8f107f08d98
CRs-Fixed: 2637653
