Add helper routines to extract TLV params in WMI EXT service ready
event. These helper routines abstracts all TLV related information
providing APIs to extract ext serivce ready params.
Change-Id: Ic989331856ed2f9376965bdec4b658328f9e470b
CRs-Fixed: 1079237
qcacld-2.0 to qcacmn propagation
To debug the fwr stuck issue as early as possibile,
reduce the wmi max pending command threshold to 256
from 1024.
Change-Id: Ic3cbe26cca979dcaa68fca03e6fe1af397cf0c4f
CRs-FIXED: 1080761
Add TLV changes to pass DISA parameters received from
WMA and pass them to firmware for firmware
to encrypt data and send back to driver.
Change-Id: Ic6928a93f799c47518fbbad96564062f595287dd
CRs-Fixed: 1072545
qcacld-2.0 to qcacmn propagation
As Current WMI interface need both the ARP/NS configuration
in single command. To support active offload host need to
cache the ARP/NS at wma layer so host can fill the other
request and configure down to firmware complete request
(ARP+NS).
Change-Id: Ie0a57d216379817ff0ae48f4f582c9108e8ecca1
CRs-Fixed: 1067683
These fixes are made during qca8074 VP control path bringup.
Add fixes in tlv.c and enable TLV helper routines for WIN.
Fixed some inconsistencies in wmi API params by adding compiler flags.
This needs to be cleaned up so that API and params have common interface
between WIN and MCL.
Change-Id: I0821daa58df86ad0b394a7846a982a9e3577cd14
CRs-Fixed: 1063252
This change implements the Non-TLV WMI API for setting bandwidth
fairness. This WMI command was implemented as part of the recent WIN SW
release. This change ensures it is adapted to convergence code structure.
Change-Id: Ib9984c43b91b105bfb4687a7591f4fab509febc4
CRs-Fixed: 1060577
Add changes to allow coexistence of WIN/ MCL TLV implementation
through use of CONFIG_MCL flag and change of MACRO names.
Change-Id: I6868c288a43fd3afb19c84b8a9d4ef0dfbee5c94
Acked-by: prgandhi@qti.qualcomm.com
CRs-Fixed: 1008872
Compilation fixes made to compile TLV on WIN code base.
Also, Previous gerrits used WMI_NON_TLV_SUPPORT for all
compilation fixes of WIN vs MCL, using CONFIG_MCL and
CONFIG_WIN wherever it is found appropriate to keep it
consistent with other modules.
Change-Id: I1c129d736746556210c46f3122e2739d233e1d6b
Acked-by: prgandhi@qti.qualcomm.com
CRs-Fixed: 1008872
qcacld-2.0 to qcacmn propagation.
oem data request len size should be of 4 byte instead of
1 byte.
Add changes to correct len size in wmi unified API.
Change-Id: I9b377420c50ff1160964f94be5eaa0072df0f63d
CRs-Fixed: 1013488
Fix the occupied channel list that is being passed from CSR to
WMA to WMI to firmware.There is a conversion happening in
WMA from channel number to frequency which is the root of the
issue.
Change-Id: I8a2f8c9d31897b38086df26ebd386ec59d0f3540
CRs-Fixed: 1039020
More detailed logging needed for mgmt frames
Add vdev_id, frame type, subtype, and channel to logs by defining wrapper
function around logging macro and calling it from send_mgmt_cmd_tlv
Change-Id: I0c8c26e3194d97be7d903f64c5c5909c2d4b9799
CRs-Fixed: 1011346
Initialize bad peer tx control data structure in WMA,
send down the initial configuration info to fw and
configure the peer status update setting in the tx_rx module.
CRs-Fixed: 975526
Change-Id: Ib380e10a0b343b6a8f9c2c0bf6d6dd602d2601c5
Dwell time can be modify based on channel congestion per scan
request.
Add changes to enable firmware to use scan control flag and select
dwell time optimization algorithm based on ini values.
Change-Id: Iea3de57c1b7d087442e4b8984b4184d24bb8c930
CRs-Fixed: 994443
1.Logging of all WMI activities(commands, tx complete, events)
is adapted for WIN.
2. WIN and MCL continues to use existing approach of memory
allocation and it is managed using feature flag in common code.
3. Use debugfs for WMI event debugging.
example to read buffer through debugfs interface -
- Navigate to WMI directory under debugfs (/sys/kernel/debug/WMIx)
- It will display elements/files for all command/event buffers
- "cat wmi_command_log" (desired buffer name)
- Output will display something like this:
CMD ID = 16001
CMD = d 0 d8c6de24 e1cf
CMD ID = 16001
CMD = 8 0 0 0
CMD ID = 16001
CMD = d 0 d8c6de24 e1cf
CMD ID = 16001
Change-Id: I26895b480b9eaa400183c4667b9ac6980939cab9
Acked-by: Pratik Gandhi <prgandhi@qti.qualcomm.com>
CRs-Fixed: 1019979
Add host support for WMI POWER DEBUG command to control mac_core power features
for run time debugging.
Change-Id: Ifc810b24222507f1445a84a54caa8aee5e815b38
CRs-Fixed: 1007598
Replace the WMI command WMI_SOC_SET_DUAL_MAC_CONFIG_CMDID
and event WMI_SOC_SET_DUAL_MAC_CONFIG_RESP_EVENTID with
WMI_PDEV_SET_MAC_CONFIG_CMDID and
WMI_PDEV_SET_MAC_CONFIG_RESP_EVENTID respectively since
the former are obsolete. The new WMI commands and events
additionally carry the pdev id.
Change-Id: I77eab3ead005bbb7f951ce7e077cd661813cb628
CRs-Fixed: 989502
Replace the obsolete WMI command WMI_SOC_SET_HW_MODE_CMDID with
WMI_PDEV_SET_HW_MODE_CMDID and event WMI_SOC_SET_HW_MODE_RESP_EVENTID
with WMI_PDEV_SET_HW_MODE_RESP_EVENTID respectively. These new WMI
commands and events additionally carry the pdev id and all mac id
references are replaced with pdev id.
Change-Id: If2a3f93dcd1947eedce8d4eac8ed936166f7e078
CRs-Fixed: 989502
Replace mac_id with pdev_id for WMI pdev commands and
vdev start response handler to support multi-radio in
converged firmware. In order to maintain backward
compatibility with old fw, host needs to check
WMI_SERVICE_DEPRECATED_REPLACE service id in service
bitmap and needs to fill pdev id or mac id accordingly.
Change-Id: I7e6b40b4c0bd20e967dc0a383b480068e256486f
CRs-Fixed: 994415
WIN platform uses non-tlv implementation for host to
target wmi commands. Add support for non-tlv
implementation in common wmi layer.
Change-Id: I1f832695b0d41b521be6b18df0cad31aae11b6c9
Acked-by: Kiran Venkatappa <kiranv@qti.qualcomm.com>
CRs-Fixed: 1005778
Replace the obsolete WMI command WMI_SOC_SET_PCL_CMDID with
WMI_PDEV_SET_PCL_CMDID. WMI_PDEV_SET_PCL_CMDID carries the weightage
for all the channels (preferred and non-preferred) in the same order
and length as that of the command WMI_SCAN_CHAN_LIST_CMDID. This is
in contrast to the command WMI_SOC_SET_PCL_CMDID which carries only
the preferred channel list.
Change-Id: I040f4307491d3242d2e9409dbbe8005c4b307bf5
CRs-Fixed: 989502
Move tlv formation of wmi setup key installation commands from umac to
common wmi layer.
Change-Id: I51250a9b1b6bb5aed06657b9f88f4659430f4c74
CRs-Fixed: 987362
Move tlv formation of wmi vdev start/restart commands from umac to
common wmi layer.
Change-Id: Id040983068ff610e68880dd5f503edf9b9c8cff9
CRs-Fixed: 987362
Replace mac_id with pdev_id, add vdev_id to peer commands/events
and change reserved0 to pdev_id in PDEV commands.
Change-Id: I2f659159fa2f0d023650eae68b6d3115aac379b0
CRs-Fixed: 983619
wmi rx event context can be modified at runtime by
upper layers. Protect rx execution context for wmi events
to avoid race conditions.
Change-Id: I7eed7108d09f8f39432990b2ebfef29a41bfa9aa
CRs-Fixed: 983619
Adapt common wmi layer with converged os abstraction layer.
Remove references to non-converged header files from
wmi layer.
Change-Id: I3671a40604fa1a5f10a5a67106db33f382e0f335
CRs-Fixed: 983619
Move tlv formation of wmi scan roaming and management commands from umac to
common wmi layer.
Change-Id: I99b2651c0054d03e58da697ab7b902b5629eeb4a
CRs-Fixed: 983619
Remove hard-coded rx execution context of wmi event callbacks.
UMAC layer needs to register execution context while registering
events with wmi layer.
Execute wmi rx event callbacks in following context-
1) work queue context provided by wmi layer.
2) umac provided context, umac can choose to
execute in thread context or default tasklet context
based on umac implementation.
CRs-Fixed: 978619
Change-Id: Id9b1f1e5157e8a203f93a62791f85a8145cc1599
Add common unified API and tlv/non-tlv callback wrappers.
Add tlv implementation of common MCL/WIN API.
CRs-Fixed: 978603
Change-Id: I7e70b48ef5e1df0c0f81c639579e6eb1a6685dc3
Modify wmi handle and wmi unified interface API
for common wmi layer.
Register UMAC callbacks using opaque callbacks.
CRs-Fixed: 978579
Change-Id: I505fe4ac339213db30bb00695234c4cfea5a5908
Add new directory structure and new files for
tlv and non-tlv implementation.
wmi layer shall not use global context of other layer,
remove global context and unused methods.
CRs-Fixed: 978547
Change-Id: I230f59052d9db8e1660cc087b09e03641227f490
