Reduce log level for few prints to debug to avoid flooding
of prints to console.
Change-Id: I514585cc87d51ead15fb1f40d45f62023628d9bb
CRs-Fixed: 2295815
Do sap_ctx release for all DFS "Ignore" case.
Otherwise, the ref count may mismatch.
Change-Id: Ib3d7c416ec3942f4d0317825fa504bc2b5abd968
CRs-Fixed: 2297787
Make changes to the Kbuild and config files to
enable and compile crypto common component
Change-Id: Ie16acd71d7794aa8ffaf6e48596bc6f46294a1df
CRs-Fixed: 2294394
Remaining may be greater than its original value when
(remaining & 0x3)!=0, then OOB occurs when memcpy.To address
this, align the remaining after doing memcpy.
Change-Id: I3e39a791a76a272e82beb6561375e26ca84ec0f4
CRs-Fixed: 2259721
lim_process_ap_ecsa_timeout() contains a misleading indent. Reduce the
indentation of the affected code.
Change-Id: Ic18ebf88b0a754c8088005d22a9cec94313fa550
CRs-Fixed: 2297513
Currently, hdd_update_tgt_cfg() continues execution if allocation of the
pdev object fails. Unsurprisingly, this leads to numerous access issues.
Abort hdd_update_tgt_cfg() if allocation of the pdev fails.
Change-Id: I1c820994510a10949ef546cac06a8eb97ca0adf1
CRs-Fixed: 2297412
For SAP (2.4G) + SAP (5g dfs chan), the radar event
will be posted to all vdevs. 2.4 SAP will run into
failure in random chan selection.
Fix by ignoring radar event for Non dfs channel SAP.
Change-Id: I739f2a84f17941e501dfe52c9cd12afc6a42425f
CRs-Fixed: 2294077
The hosts sends the beacon template to firmware through the
command WMI_BCN_TMPL_CMDID. The firmware sends a TX complete
indication via the WMI_OFFLOAD_BCN_TX_STATUS_EVENT and upon
receiving this host decrements the CSA count.
The hosts waits until the csa count becomes zero and then sends
vdev restart to firmware. There are some issues with this
implementation when 10 beacons with CSA are taking more time
than 1 sec. This is because in STA+SAP case sometime the
WMI_OFFLOAD_BCN_TX_STATUS_EVENT is received after in 200-300ms.
If the host doesn't receive the channel change event, it gets
struck in the channel change.
To avoid this scenario, send the beacon template to the firmware
for every beacon interval without waiting for the beacon TX
complete indication from FW except for the first beacon template
updation. Introduced a new timer (ap_ecsa_timer) to update the
firmware with the beacon template.
Change-Id: I377768b87c96fd5064aa04d1ed5434a475e656ef
CRs-Fixed: 2294661
Revert I457c20f6ba908cac32cfc9b27fbaf980f1ec174d, which removes the
check to ensure recovery has been enabled via configuration before
starting the recovery process. This is a critical feature for internal
debugging. The check was moved into cds_trigger_recovery() to prevent
callers from bypassing this configuration and unconditionally asserting
the target firmware. Restore that check now.
Change-Id: Ieb347cfcd0eecd24f005d374c0fead07c34f3705
CRs-Fixed: 2296038
cds_trigger_recovery() already checks for various conditions before
actually triggering recovery. One of these checks ensures that recovery
is enabled, but some callers are checking to see if recovery is enabled
before calling cds_trigger_recovery() as well. Because of this, some
important checks are skipped, and crashes can occur when they should
not. Remove the redundant checks at the call sites for
cds_trigger_recovery() so that all of the recovery conditions are
properly handled, and the wlan driver avoids crashing when it should
not.
Change-Id: I8c26a002b66496a1eb06263f3f8b91ead739e3ac
CRs-Fixed: 2296008
When channel 4 is unsafe channel in 2.4g LTE coex ACS case,
the weight for channel 4 will be calculated as 0 by function
sap_sort_chl_weight_ht40_24_g, it's wrong because weight_copy
doesn't be initialized in this case, so acs channel select
may choose wrong channel to start sap.
Fix is to add initialization for weight_copy when weight is
SAP_ACS_WEIGHT_MAX.
Change-Id: I4aa0fb133774d9980146a9ceae9b91154bd15bbc
CRs-Fixed: 2282371
Scheduled scan (a.k.a Preferred Network Offload, PNO) is intended to be
used only for station interfaces. However, it has been observed that
userspace will send scheduled scan requests for non-station interfaces.
Reject requests to start or stop a scheduled scan on non-station
interfaces.
Change-Id: If5abd242f134518ac4e3d942c1513c66b5c50ff3
CRs-Fixed: 2295101
In wma_vdev_resp_timer(), while handling WMA_DEL_STA_SELF_REQ if
wma_crash_on_fw_timeout() is true, then wma_vdev_resp_timer initiate
SSR and memset iface structure without freeing iface->del_staself_req.
This results mem leak in wma_vdev_resp_timer().
Free all the dynamic memory from iface structure in wma_vdev_deinit()
instead of handling them separately.
Change-Id: I7b16ddc9dfb70638c6f895bd97cd9c106bfad595
CRs-Fixed: 2293099
Clean up the WMA context structure which currently has the following
issues:
1) Fields are defined that are unused
2) Fields are defined that are missing documentation
3) Fields are defined with documentation inline rather than in the
documentation block
4) Documentation exists for fields that are no longer present
Change-Id: Ia9fb52c3967818c0a12ade7a15f0c353494f56de
CRs-Fixed: 2296105
pe session_id should not be used as vdev_id.
Add a vdevId field to tAggrAddTsParams struct
and fill smeSessionId as vdevId and pass this
down.
Change-Id: Id021dda35a32f7870277d405c85a0878d7baa3f3
CRs-fixed: 2272126
Do not required to print function and line number
for data path statistics function which is invoked
by ioctl.
Change data path statistics to info print so
that it can be printed in dmesg as well.
Change-Id: I4b5ea4202255ace71dbb6f9a4bbff6f93e496425
CRs-Fixed: 2278885
When peer creation fails in wma_set_link_state, wma sends the
WMA_SET_LINK_STATE_RSP msg to LIM and Lim frees the msg->bodyptr
But there is a situation occurs where after this wma_peer_create
fails, mc thread stop sys event also occurs where the mac_stop
is invoked which calls the pe_free_msg -> pe_free_nested_messages
In pe_free_nested_messages, if the msg type is
WMA_SET_LINK_STATE_RSP, we free the msg->bodyptr->callbackArg.
This callbackArg points to the PE session. Trying to free the
PE session results in memory corruption.
Just pass the session id as callback argument when the callback
is lim_post_join_set_link_state_callback.
Change-Id: I27f9127685ac7ef8d215b135f1625e8e2f225fc0
CRs-Fixed: 2287827
Peer assoc command expects a response from firmware so peer
assoc timer is started at wma once command sent to firmware.
In the failure scenario peer assoc command is dropped at wma due to
unavilable 11b rates but timer was not stopped. So at later point of
time timer got expired and it triggered timeout error handling.
Dont start the timer in failure scenario and send failure response to LIM
if the peer assoc command failed to send command to firmware.
Change-Id: Iaa644fbe7940502fc07b5110787c2dc5b58f4612
CRs-Fixed: 2292610
After bring up SAP(2G)+SAP(5G) DBS mode, initiate CSA on SAP2
from 5G to 2G (DBS mode to SCC mode) with cmd:
iwpriv wlan1 setChanChange X
assert will happen.
Fix: SAP+SAP on same band on Helium is not PORed case yet,
Do concurrency check for path: iwpriv wlan0 setChanChange X.
Change-Id: Iacd6f2b4c49f4bb52739f602e7ba1e8cd9be04bc
CRs-Fixed: 2289366
Remove the debug assert added in wlan_ipa_uc_disable_pipes when
the check for IPA pipes disabled is true. Anyway logging is in
place to give information about the scenario.
Change-Id: If2906f0ee827e84df4594693702064cd249c564c
CRs-Fixed: 2295461
