Currently, wmi_service_bitmap field in WMI_SERVICE_READY_EVENT is
exhausted. WMI_SERVICE_AVAILABLE_EVENT is available for upcoming
capability intimations.
Add service_available_event handler in host driver to extract
FILS roaming capability of fw. Based on this capability only,
send RSO, update connect params, HLP IE commands, GTK offload
are sent to fw.
Change-Id: I320ba86d29109d8cba23830ef9cb5e159792f19a
CRs-Fixed: 2094229
This change adds support for configuring voltage corner mode
thorugh INI parameter. User will provide a bitmap which will
be passed on to the FW during initialization. In this bitmap,
each pair of bits till BIT27 correspond to different phymode,
bw combination. Bit values signify voltage corner configuration.
Change-Id: I9e86d43079225b6f08fdd281c8f424b18abcffe9
CRs-Fixed: 2109884
Add sanity check for num_hw_modes and num_phy in wma_populate_soc_caps()
for WMI_SERVICE_READY_EXT_EVENTID.
Change-Id: I023d737449283f9ac092d278bde016b208b2c891
CRs-Fixed: 2119887
1) Currently all the parameter to decide best candidate are chosen
as by default.
Add INI support for those parameters to change values on basis
of performance.
2) At the time of calculating best candidate score, rssi consider
bucket size, good rssi, bad rssi, good rssi percentage from total
rssi percentage, bad rssi percentage from total percentage.
Configure these all params from ini.
Change-Id: I808a40486473fcbb161c12fbd369b3b846beb8c2
CRs-Fixed: 2121735
STA is roaming to 2G AP even though 5G
only is configured through ini.
Set weightage of the 2G social channels
to zero so that firmware will not roam
to 2G channels.
Change-Id: I7dea8413618265e0f1fe353da4b858583c1921af
CRs-Fixed: 2117614
Add 1 second wake lock for 4 way handshake to avoid APPS
power collapse in middle of eapol exchange which can delay
the association process.
Change-Id: Ife73dc00aa05b5a80d0a90afd18468bd033ebdd9
CRs-Fixed: 2118533
The current driver strategy is to converge on unified APIs, and the
unified WMI struct flashing_req_params conveys the same information as
typedef tSirLedFlashingReq, therefore replace tSirLedFlashingReq with
struct flashing_req_params.
Change-Id: I4ef75ee3bff7c83dbf8197bba0802569282a414f
CRs-Fixed: 2121335
Current driver forming a unit test command within HDD layer and uses
message passing method to deliver it to WMA layer which
requires HDD layer to have a knowledge of how to form a unit test command.
User SME API to send params to WMA layer and let WMA form a unit test
command and send it directly to FW through WMI layer instead of HDD
forming and passing it down.
CRs-Fixed: 2118725
Change-Id: Id1838939813e6cd2d52cee8720a1f4e0ca34329b
Host should keep the wake lock from the time it sends
WMI_PDEV_SET_MAC_CONFIG_CMDID to FW till it receives the
WMI_PDEV_SET_MAC_CONFIG_RESP_EVENTID. This will avoid any fatal
crash condition.
Change-Id: Id16a1957b38acee6cf45c123ea9dbab25aae9b39
CRs-Fixed: 2070779
Implementation to change BmissFinalBcnt dynamically.
User can set totalBcnt using the new command
QCA_WLAN_VENDOR_ATTR_CONFIG_TOTAL_BMISS_CNT.
BmissFirstBcnt will retain its default value or from ini.
BmissFinalBcnt will be configured as (totalBcnt - BmissFirstBcnt).
Change-Id: Ie3c3895d48248d349400e755f07edc807e335b44
CRs-Fixed: 2081906
During host invoked roaming, set WMI_ROAM_INVOKE_FLAG_NO_NULL_FRAME_TO_AP
flag so that FW will not send NULL data frame while doing transition to
same bssid.
CRs-Fixed: 2046964
Change-Id: I043c3d2431e4da5af36fb710bd36a520550abbd3
Change-id Iafd5666179d079c7bcc950277092cef3046356bf was added to remove
antenna sharing support from SAP and STA case but customer needs those
changes for SAP case only.
So bringing back changes for STA case.
CRs-Fixed: 2117829
Change-Id: I79f7c5ae1fd642f0b26170f066a5409638cdd873
While DUT is in SAP or GO mode, due to LTE antenna sharing mechanism,
DUT is associating in 2x1 chains to HT clients.
As per new requirement, remove dependency of number of chains on antenna
sharing. If HT client supports 2 chains, and due to DBS/LTE antenna
sharing SAP/GO drops down a chain then rate adaptation at peer takes
care of dropping down chains at peer side
Change-Id: Iafd5666179d079c7bcc950277092cef3046356bf
CRs-Fixed: 2108484
Currently HDD sends a FW memory dump request to firmware without
checking support for this feature. This can lead to a crash as firmware
doesn't send the command response if feature is not supported.
Add a check in HDD so that the request is only sent when FW memory dump
capability is advertised by the firmware.
Change-Id: I73b980f50910e13aa5f2d2434f07b6f985dd5010
CRs-fixed: 1090806
Add support to send rate information for mgmt frames.
Currently default rates are used by target for the mgmt frames before
association. If the AP does not support the default rates (1 Mbps for
2.4G and 6Mbps for 5G), STA would still send AUTH, ASSOC frames with
the default rates. Add support to send the minimum rate supported by
the AP as part of the MGMT Tx WMI command.
Change-Id: I38d832818bbbd5fe3dec5660bd01dd08798bf0be
CRs-Fixed: 2085006
Current method for calculating LISTEN INTERVAL are static
configuration a.ka. ini based. Now OEM / USER want to take
control of setting LISTEN INTERVAL as per their applications
need. Once if USER configure the LISTEN INTERVAL value using
vendor command then host should avoid changing the LI value
during each suspend/resume. User LI value will be override
configuration. Once USER will Disable the LI using vendor
command then host can fallback to current default method.
Change-Id: Ia9b412b073c059df0cdff7bcda8198f7581e796d
CRs-Fixed: 2040298
iface->del_staself_req is used to check if del sta self was defered
and if it is set vdev detatch is called. iface->del_staself_req is
also set in case del sta self was not defered and thus del sta self
resp may get called twice, assuming it was differed and this result
in double free of del_sta_session_req.
To fix this added a bool to check if the del sta self was defered.
Change-Id: If4c2bc2a5bb6b8761f4130119a96602055d45b77
CRs-Fixed: 2116888
When kernel panic happen, if WiFi FW is still active,
it may cause NOC errors/memory corruption, to avoid
this, inject a fw crash first.
Propagated from qcacld-2.0
Change-Id: I97a696a02dfd73aaca212ef1bca9f3597df1e382
CRs-Fixed: 2052332
Set the limit off-channel command parameters and conc_system_pref
according to active tos indication from application.
CRs-Fixed: 2066088
Change-Id: I896999adb59aa468daf33364c708d95ef3062018
Currently the mpdu_data_len in Rx pkt meta is not checked for
upper bound in wma_form_rx_packet.
Add sanity check to drop the packet if mpdu_data_len is
greater than 2000 bytes. Also add upper bound check for
frame_len in lim_process_auth_frame function.
Change-Id: I7ab454045e2f6d278351dcabde6da556f9f741e0
CRs-Fixed: 2093392
Add data structures to save beacon tx rate.
The beacon data rate is multiples of 100 Kbps.
Firmware expects the data rate in the form of hw rate codes.
So convert the data rates to hw rate code.
And send it to firmware.
Change-Id: Ia39fd4c14defa729f75f2c45748fe5b04b909647
CRs-Fixed: 2099052
Introduce the following items in WCNSS_qcom_cfg.ini for
user to modify them for MAWC based roaming.
mawc_roam_enabled
mawc_roam_traffic_threshold
mawc_roam_ap_rssi_threshold
mawc_roam_rssi_high_adjust
mawc_roam_rssi_low_adjust
Change-Id: Ief51e3e91603bfd7f6c6deed3ca48bc717b2b6fb
CRs-Fixed: 2081413
Currently wma_open() takes a cds_ctx parameter. All of the other WMA
functions which previously took a cds_ctx no longer use that
parameter, and those functions have been modified to remove the unused
parameter. wma_open() still needs the cds_ctx, but it can get that
context by calling cds_get_global_context(), so remove the cds_ctx
parameter to be consistent with the other WMA functions.
Note: the fact that wma_open() needs the cds_ctx, and then
dereferences it, is a layering violation that needs to be addressed in
the future.
Change-Id: I176e2ac68cc2e8081645a4ce3c158b41d3018587
CRs-Fixed: 2109263
Currently wma_wmi_service_close() takes a cds_ctx parameter. All of
the other WMA functions which previously took a cds_ctx no longer use
that parameter, and those functions have been modified to remove the
unused parameter. wma_wmi_service_close() still needs the cds_ctx, but
it can get that context by calling cds_get_global_context(), so remove
the cds_ctx parameter to be consistent with the other WMA functions.
Note: the fact that wma_wmi_service_close() needs the cds_ctx, and
then dereferences it, is a layering violation that needs to be
addressed in the future.
Change-Id: I02564bae87077314fea58c1509b3a50b8d567a7a
CRs-Fixed: 2109262
Currently wma_wmi_work_close() takes a cds_ctx parameter. At one time
this was needed for the call to cds_get_context(), but that is no
longer the case, so remove this unused parameter.
Change-Id: Ibc64cd1398babc899c21a1ee4c0fc280769c4d9e
CRs-Fixed: 2109261
Currently wma_close() takes a cds_ctx parameter. At one time this was
needed for the call to cds_get_context(), but that is no longer the
case, so remove this unused parameter.
Change-Id: I31d1016cff580f9330027f8104348466df9f01dd
CRs-Fixed: 2109259
Currently wma_mc_process_msg() takes a cds_context parameter. At one
time this parameter was needed, but that is no longer the case, so
remove this now unused parameter.
Change-Id: Ia460afc5db932274cd960485af93fc48e899ff35
CRs-Fixed: 2109258
Currently cds_wma_complete_cback() takes a parameter that is a pointer
to the CDS context. However CDS already maintains its own context,
hence this param introduces an unnecessary coupling, so remove it.
Change-Id: I1b4588f18f807008fd212a8e5d04e3895a12922c
CRs-Fixed: 2109257
Currently wma_pre_start() takes a cds_ctx parameter. At one time this
was needed for the call to cds_get_context(), but that is no longer
the case, so remove this unused parameter.
Change-Id: Ic4582ecafbee6fc1d0f8ebbf3c62ed8c7b47a179
CRs-Fixed: 2109255
Currently wma_stop() takes a cds_ctx parameter. At one time this was
needed for the call to cds_get_context(), but that is no longer the
case, so remove this unused parameter.
Change-Id: Iba40ac86e5916be3b8c2a62cf5483c9b7a242be5
CRs-Fixed: 2109254
Currently wma_start() takes a cds_ctx parameter. At one time this was
needed for the call to cds_get_context(), but that is no longer the
case, so remove this unused parameter.
Change-Id: If6756ca37a7e4ec4ade1c72eea080f3bc89ad7e4
CRs-Fixed: 2109253
Currently wma_setneedshutdown() takes a cds_ctx parameter. At one time
this was needed for the call to cds_get_context(), but that is no
longer the case, so remove this unused parameter.
Change-Id: I65f2af2e97b09523f5cf00369b5cf95ad01194d9
CRs-Fixed: 2109252
Currently wma_needshutdown() takes a cds_ctx parameter. At one time
this was needed for the call to cds_get_context(), but that is no
longer the case, so remove this unused parameter.
Change-Id: I31fd07480719bf3401ed52b57951e19ccb4d143c
CRs-Fixed: 2109251
qcacld-2.0 to qcacld-3.0 propagation
Before this change the ACS calc process only consider the
channel's rssi and bss count in this channel, in this change
add noise floor, channel free statistics and tx power in the
ACS calc process.
Change-Id: I654e53fa2441e03723f150d973c124985c67f2b4
CRs-fixed: 1050316
Currently wma_register_roaming_callbacks() has a cds_ctx parameter. At
one time this was necessary since the global context was required to
get the module-specific context. However the global context is no
longer required for this purpose, so remove the unused parameter.
Change-Id: Ida681fb20dd98a46f385f1e04662f72a334c68bf
CRs-Fixed: 2103626
Currently wma_get_wcnss_software_version() takes a p_cds_gctx
parameter which it does not use, so remove it.
Change-Id: I86a5893a9407bad034a32c105aec92d4e6054744
CRs-Fixed: 2102549
qcacld-2.0 to qcacld-3.0 propagation
FW has limitation to support old WMI_REQUEST_STATS_CMDID and
WMI_UPDATE_STATS_EVENTID interface on AP vDev. FW suggest to use new
WMI_REQUEST_PEER_STATS_INFO_CMDID and WMI_PEER_STATS_INFO_EVENTID to
get tx/rx rate.
This checkin is about HDD layer, provide APIs/callbacks to upper layer
to query rssi/tx/rx statistics of peer station associated with SAP,
and provide a default disabled ini setting and checking FW's
WMI_SERVICE_PEER_STATS_INFO capability to control this get peer info
interface. Add/change iwpriv/QCA_NL80211_VENDOR_SUBCMD_GET_STATION/
cfg80211_ops.get_station interfaces to upper layer.
Change-Id: Ib1571219faa16e3bc8c3eb1260137ae08b8b6016
CRs-Fixed: 2059507
If a OCE AP is found in previous scan cache in fw, fw need to defer
sending probe for sometime to check for broadcast probe response
from OCE AP.
Send the probe deferral time and the time gaps between the two probes
from host for STA vdev.
Change-Id: I973fc1e2ea43950bd4e2168083644a240a298c22
CRs-Fixed: 2068490
WMA layer needs to use host defined target params as
direct access of wmi target definition is not allowed.
Use host defined wmm params in wma layer.
Change-Id: I8af9c7802c20ce88a6fa158db5acab018807506e
CRs-Fixed: 2072166
As beacon and probe rsp are not deferred in LIM the non-deferable
LIM msgs from WMA may get delayed due to processing of beacons and
probe responses.
To Avoid this post the non-deferable LIM msg from WMA with
high priority so that they can be processed before beacons and probes.
Change-Id: Ida7cb86be397a415893142a318b75b41c13578b5
CRs-Fixed: 2090173
Remove the channel avoid event processing in wma as the
event processing handled by regulatory component
Change-Id: Ifa0e340c6341b21c192066c8c6eb14418b041062
CRs-Fixed: 2080241
Currently, a wakelock is acquired before vdev start is sent to firmware
and released after a vdev stop response is received. In some cases, this
can cause a race condition where the device will power collapse before
the association process is complete. Instead, release the wakelock after
either vdev up or vdev down is sent to firmware, ensuring the entire
association process is protected.
Change-Id: Iab1a241f1c5810d9f71bfd86e1e8036847ebf602
CRs-Fixed: 2082928
Currently there is no support to configure SMPS parameter
from host, add support to configure SMPS parameters using ini.
Change-Id: I6f8273ffed39a0b95c31f1647e86406b870165f2
CRs-Fixed: 2080571
warning: implicit conversion from enumeration type 'tDriverType'
to different enumeration type 'enum driver_type' [-Wenum-conversion].
Move enum driver_type to QDF.
Change-Id: Ic89e4ee512a2d70c27324446257286aaafd49839
CRs-Fixed: 2055487
Link stats memory is not freed in case of driver
unload happens before more results is received
from firmware.
Fix is to free link stats memory on wma close.
Change-Id: I3c54a0bc4951c70b2ca7116e37e0b62a5c6b7a2f
CRs-Fixed: 2083603
Currently, a hard-coded enhanced multicast filter configuration is being
sent to firmware. Instead, create a set of enable/disable APIs, and
configure enhanced multicast filter based on advertised firmware
capability.
Change-Id: I488b4a921612e1081266be8831be098d755375f9
CRs-Fixed: 2078615
