Currently the compression ratio is hard-coded to either 2:1 or
3:1 in several places. This is not sufficient for new compression
algorithms as they can support higher compression ratios.
Add support for calculating the compression ratios from the source
and target bpp thereby eliminating hard-coding.
Change-Id: I6383f3d0c781193d0a9ed74df5a95d8e856edb3d
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Add support to configure the DPU pipeline to support VDC-m
topologies.
Change-Id: Ib8ce9a0eaeaa838759fb09cb2ee164d4765e4989
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
This snapshot change adds downstream support
for drm 5.x+(msm_lahaina branch) linux kernel.
Change-Id: Ia691c95da155a00e449c91a2f1a5b20a8e71aed4
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Reject composition if any seamless transition such as
VRR, dynclk is requested during power on/off commits.
Change-Id: I731bfc06b3bd1e7ae920c12cbc68f95f5cc01687
Signed-off-by: Kalyan Thota <kalyant@codeaurora.org>
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
Change overrides the panel physical dimensions with correct
value upto a precision of millimeter, which was getting
truncated to centimeter as drm structures maintain it in
centimeters.
Change-Id: I035357596ed42154b657b791846aee6f940f2e53
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Add changes to support avr mode config update during
prepare commit which happens before gpu fence wait
for the input buffers.
Change-Id: Ib2cb5b7e1f10501914c003f6cf066b85048f79d4
Signed-off-by: Kalyan Thota <kalyant@codeaurora.org>
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
Add support to enable one-shot mode during qsync
update. This feature ensures the frame drops can be
reduced due to delayed software flush for the
current commit. Also, add changes to disable the qsync
feature post commit.
Change-Id: Icb158853f52284bcf8fa641e5f62200c5460b660
Signed-off-by: Kalyan Thota <kalyant@codeaurora.org>
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
ESD check is disabled while switching panel operating mode.
This change enables ESD check after panel operating
mode switch is done.
Change-Id: I421d70d9be4c14107a7b51470801157d28874ffb
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
Adding debug, info and error prefix for log messages
in dsi files. To enable debug logs
run "echo 0x1 > /sys/module/drm/parameters/debug"
Change-Id: I438ac16954bd1d39450f8adeb7fb17f9ea6f8140
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Unpaired trace "sde_power_resource_enable" caused tracer parse
incorrect trace points and display weird state on Chrome. Make
trace "sde_power_resource_enable" pair to fix it.
Bug: 122510119
Test: Checked sde trace can be displayed correctly on Chrome
Change-Id: I938b5648a09e00eaea59070af31a2e6469763087
Signed-off-by: Midas Chien <midaschieh@google.com>
(cherry picked from commit 3a335059bf7a200977e8f4e0a4aa5c6ceca3863a)
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Change updates connector edid node with proper panel physical
dimensions based on panel device tree file.
Change-Id: I36db9c3e5b5aee926a0d029ae742166fc8c7591c
Signed-off-by: Vara Reddy <varar@codeaurora.org>
The drm_panel defined in sde_connector was not used, so
removed it.
Change-Id: I70a94f11ebd60362d25e37a256f46d3d4942089d
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Current mode fixup validates mode against both state mode and crtc mode
which causes mismatch between validation and drm_mode_equal check.
Perform validation against the same mode (crtc->state->mode) to avoid
mismatch and reflect proper state.
Change-Id: If5647f2df0275cc14dd8d761d16e58fd0aa775f7
Signed-off-by: Adrian Salido <salidoa@google.com>
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
Create a data structure to maintain available hardware resources
and track capabilities. This data structure is used to send
the current available resources and caps information to
connector ops get_mode_info, get_modes and validate_mode to
process the display mode.
Change-Id: If38fc628ee5ab4729821f88c0050ab45375187b8
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Currently the dynamic bit clock switch trigger for command mode
is supported via sysfs node. This might lead to unnecessary
race conditions, when dsi driver is enabling the dsi bit clock
as part of commit and at the same time if bit rate change via
sysfs happens. So make the trigger happens via kernel mode set
call as done for video mode.
Change-Id: I17acb408d2b6dbd6fa41994e56262e31e43d088b
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Yujun Zhang <yujunzhang@codeaurora.org>
This change adds support for dynamic switching of dsi clocks
to avoid RF interference issues. Also with dynamic dsi clock
switch feature coming into picture, now populate the supported
refresh rate as list instead of providing a range. Modify the
logic to enumerate all the modes in dsi driver, taking dynamic
bit clocks, resolutions and refresh rates into account.
Change-Id: I5b6e62bc935cf2234bdd96fcb3c7537b4e735fff
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Yujun Zhang <yujunzhang@codeaurora.org>
This change updates the checks needed before setting the flag
to enable panel switching between command and video mode.
New crtc active state remains disabled and it causes a failure
in the previous case.
Change-Id: I059731d2faa0f7844d3784fcf7694509fbba3ff7
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
DSI display may support video mode and command mode both and it may
support transition between these two modes.
This change adds seamless transition between these two modes for DSI
display by avoiding crtc enable/disable and panel power on/off
during modeset.
Change-Id: Id7ddaef7d1f0f7cc7d52283755bad53a246adec6
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
