Currently cdp ops are given pdev/vdev handle
as its arguments, which is directly accessed
in those APIs. This can cause a race-condition
in access of the respective handles if it has
been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id/vdev_id which will be used to get the
respective handles, and hence avoiding unwanted
access of the handles if it has been deleted.
Also deleting few ops which stores and retrieves
such handles and adding ops to set/get pdev params.
- txrx_get_psoc_param
- wdi_event_sub
- wdi_event_unsub
Change-Id: Id089d9b6b4737d700d2436e2081291a3741affb5
CRs-Fixed: 2541658
Change set 2 of ctrl_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I3f180c9c360d564f0b229b447074ad23b7c0a737
Change set 1 of the ctrl_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: Iedf6dea2215d3d04b2212c71c8ec8c7328c559e8
multipass_rx_pkt_drop is peer level stats counter
used to count multipass rx packet dropped frame.
Accumulate this counter at vdev and pdev level.
It also initializes multipass_en flag to false at
vdev attach.
Change-Id: Idaa85a71c80eefb9359abb026402b71aa28ad6a2
CRs-Fixed: 2595551
1. Move all LMAC rings to SOC from pDEV
2. Dynamically obtain lmac->pdev mapping while handling LMAC interrupts
Change-Id: Ib017d49243405b62fc34099c01a2b898b25341d0
Change cmn_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I5716a87cad56b1dfe8dd56f193bbb6ff923a6af1
Currently in dp_rx_wbm_err_process, we donot handle
HAL_REO_ERR_BAR_FRAME_2K_JUMP and HAL_REO_ERR_BAR_FRAME_OOR REO errors.
Add support for the same.
Change-Id: I22147fcd2d531c1e08214626796994593ffeb3a6
CRs-Fixed: 2580876
Local peer_id is being cleaned up across DP, HDD and PS/WMA.
So, any references to local peer_id/sta_id will be replaced
by peer mac address and all interactions between the layers
will be based on peer mac address.
Cleanup local peer id usage from DP APIs.
Change-Id: I930e1c6a09092a373c093239632d6f310fee18e2
CRs-Fixed: 2529041
Local peer_id is being cleaned up across DP, HDD and PS/WMA.
So, any references to local peer_id/sta_id will be replaced
by peer mac address and all interactions between the layers
will be based on peer mac address.
Cleanup unusued DP APIs which are based on local peer_id.
Change-Id: Idd95bc640ca7e36a427be7202935034d4ed58979
CRs-Fixed: 2529026
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles, if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles, if
it has been deleted.
Converged misc_ops
- tx_non_std
- get_opmode
- get_tx_ack_stats
- set_ibss_vdev_heart_beat_timer
- hl_tdls_flag_reset
- set_wisa_mode
- txrx_post_data_stall_event
- update_mac_id
- pkt_log_init
- pkt_log_con_service
- get_num_rx_contexts
- set_wmm_param
- flush_rx_frames
- bad_peer_txctl_set_setting
- bad_peer_txctl_update_threshold
- txrx_data_stall_cb_register
- txrx_data_stall_cb_deregister
- vdev_set_driver_del_ack_enable
- get_intra_bss_fwd_pkts_count
- mark_first_wakeup_packet
- register_pktdump_cb
- unregister_pktdump_cb
- pdev_reset_driver_del_ack
- runtime_suspend
- runtime_resume
CRs-Fixed: 2539811
Change-Id: I3080df033d6411d7078a322224b914bda2fddc0e
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged flowctl_ops
- flow_pool_map_handler
- flow_pool_unmap_handler
- dump_flow_pool_info
- tx_desc_thresh_reached
CRs-Fixed: 2539812
Change-Id: I084d3878df84778622340e87bddf90acd3e669d6
Add support to account for TSO jumbo packets on the
Tx path and print the statistics using dumpStats 3.
Change-Id: I6cc446df5c84e3ac436d922935fcd559e0704ec5
CRs-Fixed: 2356244
Add the soc context for ol_txrx,
The soc layer is used to hold the ol_pdev context.
CRs-Fixed: 2539807
Change-Id: I751ad61de55db9d86624b8b5e18b0981ffb0338d
Pass pdev to dp_peer_stats_notify API instead of de-referencing
this from peer structure.
Change-Id: I5dc679283f5822f44b4140aefb3aee44a826c720
CRs-Fixed: 2500647
Cleanup dp_get_vdev_by_sta_id to be peer mac address based
from local peer id based.
Also, modify the API cdp_peer_get_vdev_by_sta_id with additional
argument for peer mac address.
Rename cdp_peer_get_vdev_by_sta_id to cdp_peer_get_vdev_by_peer_addr.
Change-Id: I889538b5ea7ebac8973dcaaa5ebdad1ac495e791
CRs-Fixed: 2504569
Cleanup dp_clear_peer to be peer mac address based
from local peer id based.
Also, modify the API cdp_clear_peer with addition argument
for peer mac address.
Change-Id: I1bd3fab1b9510b5f1d4476e11b617fcb6417f2c4
CRs-Fixed: 2503774
In case of peer reuse case rx_tid locks are destroyed as
part of peer cleanup and are not initialized again. So while
deleting this peer as part of unref delete peer cleanup is done
which again tries to destroy the rx_tid locks which were already
destroyed. This leads to assert complaining destroying lock with
out initialization. So dont destroy the rx tid locks in case of
peer reference reuse.
Change-Id: I860de558950009cae6f62385dd665badfe9964e0
CRs-Fixed: 2504973
Tags are programmed using wlanconfig commands. Rx IPv4/v6
TCP/UDP packets matching a 5-tuple are tagged using HawkeyeV2 hardware.
Tags are populated in the skb->cb in the REO/exception/monitor data
path and sent to upper stack
CRs-Fixed: 2502311
Change-Id: I7c999e75fab43b6ecb6f9d9fd4b0351f0b9cfda8
Do not send the WMI command WMI_PEER_REORDER_QUEUE_SETUP_CMDID
to target if roaming is in progress, as there is a discrepancy
in peer information between the host and firmware when roaming
is in progress
Change-Id: I8e91635b56257bb29972898a29c454123f7cdb8e
CRs-Fixed: 2490238
Add code to remove void pointer usage for hif_handle
and use opaque pointer hif_opaque_softc and also use
cdp_soc for opaque DP soc handle
Change-Id: I2896f7704ffb809214c5b08756c4b8673307fd9e
CRs-Fixed: 2487247
Make change to remove void pointer usage in DP cal client
instead use cdp opaque pointers.
Change-Id: Ie966ebb7b6bb937d4ee1d6dce3b040804e61ac37
Crs-Fixed: 2484412
Add code to remove void pointer usage for dp_soc
and use original dp_soc structure inside htt_soc
Change-Id: Icdc26ecdb33d565c43dbc101584069808b31c1a0
CRs-Fixed: 2484403
Add code to remove void pointer usage for hal_srng
and use opaque pointer dp_hal_ring_t instead.
Change-Id: I6907f7376d7fe3c9180b8795bd96f49fead2ec64
CRs-Fixed: 2484404
Add code to use cdp_vdev instead of void pointer for
API dp_tx_send_exception and dp_tx_send_mesh
Change-Id: I63ca5a62c2a8cd6feb906181702888814650dfce
CRs-Fixed: 2480836
dp_reo_cmdlist_destroy frees any pending reo_cmds.
Each reo_cmd is associated with a handler which takes
reo_cmd->data as an input. This reo_cmd->data is a pdev
for dp_rx_bar_stats_cb. So validate pdev before
accessing it further.
Change-Id: I1c2d46d3e3f5ede4491500978153f501ebdeee87
CRs-Fixed: 2478910
Add feature flags DP_FLOW_CTL for DP flowctl ops,
DP_PEER_SUPPORT_OPS to support peer handling in DP,
DP_POWER_SAVE for power saving ops in DP, DP_CON_MON DP_MOB_DEFS
DP_INVALID_PEER_ASSERT DP_PRINT_NO_CONSOLE and DP_INTR_POLL_BOTH.
Change-Id: I01dafadf6578c0b5f36ab3ef56624912fb66b100
CRs-Fixed: 2467170
Add support to log the important events in
datapath, which will help in debugging the
datapath issues.
IRQ handler, Napi poll and srng access start/end
are the events which are currently logged.
CRs-Fixed: 2457854
Change-Id: Iba105b0e79443b670a01a929f999f94e00ea92f2
Read rssi_chain per nss per bw and from rx status TLVs
and update to host data structures.
CRs-Fixed: 2445933
Change-Id: I275e9e502a0a724410fc189ac293cadc8f2981e0
Add callback to get the roaming status and do not honor addba
response Tx failure.
Change-Id: I148542fc3c629749fc08623f5041f6ca76fee298
CRs-Fixed: 2439721
Tx completion stats should be counted per wbm ring on tx completion
and not globally. Similarly, rx stats should be counter per reo ring.
Change-Id: I1e4af0d38b23e60de78ca03316861db08ff0811a
Packets sent/received at fixed rate were also considered to
update the client rates as displayed in wlanconfig command output.
An idle client transmits NULL packets at basic rate and hence
rx rate shows up the basic rate when an idle client is connected.
Consider only data packets to update rates. Do not consider
NULL packets for rate update.
CRs-Fixed: 2435447
Change-Id: Icbf9f2a656bb0d36e16d953952c529185c119f17
1. Move statistics API's to dp_stats.c
2. Move DP_TRACE_STATS to DP_PRINT_STATS
as it is implemented based on target.
Change-Id: I62f3076a51ca35f0e12cdb0ff0230ea87c2baaf7
CRs-Fixed: 2453443
The following changes are made
-Yield dp_rx_process if poll time exceeds
-Yield dp_tx_comp_handler if poll time exceeds
-Interrupt statistics to track various interrupt contexts and
corresponding interrupt masks
-Add poll times histogram buckets to NAPI stats
Change-Id: I8c7a6bbbb97c7b3dd1dde6ac3a97113c433086a2
CRs-Fixed: 2423879
At present, DP_STATS_XXX and DP_HIST_XXX can be disabled
or enabled at the same time using macro DISABLE_DP_STATS.
Make DP_STATS_XXX and DP_HIST_XXX under different macro
so that both can be enabled/disabled separately.
HIST_STATS are by default disabled and can be enabled by
enabling ENABLE_DP_HIST_STATS macro.
Change-Id: I4e7b817afef040407a496e268f2fd680791fc47b
CRs-fixed: 2449710
