After receiving WMI service ready ext2 event and htt msdu index to
qtype map is derived, call CDP API to evaluate whether TX ILP can be
supported or not, update the TX ILP capability to DP, also send WMI
INIT CMD to FW to notify if host has enabled the TX ILP support or
not.
Change-Id: I472ebc5c7fa4b2996b790b58274fa3c048f6d7f9
CRs-Fixed: 3447519
New TLVs for MLO link state information is introduced for
get link info command. Add WMI changes to add these TLV in
get link info command
Change-Id: Ib8d12a727ac6f59257dcce69174271330a065c77
CRs-Fixed: 3431076
This change is to populate wmi service for 11az TBR rsta.
Also, this adds host based enum id for corresponding wmi service.
Change-Id: I9687855651bff222616adb3a8cf346e6264688ee
CRs-Fixed: 3437035
Since special vendor roam log is not need for common roam,
add flag to filter the log.
Change-Id: Ide67de16ae68c507a7b4e81672cbf5e0fc0e4c5d
CRs-Fixed: 3442621
Add support for WMI_CSA_IE_RECEIVED_EVENTID as:
1. Register the handler
2. Handler to extract the event
Change-Id: I9f476c7fbc51d9686d05fbdb5f46dec3bcd3c29e
CRs-Fixed: 3431363
Read the new service capability:
WMI_SERVICE_TDLS_CONCURRENCY_SUPPORT for TDLS concurrencies
support. With this service capability below concurrencies are
supported:
STA+TDLS+P2P
STA+TDLS+P2P+P2P
STA+TDLS+P2P+SAP
Host driver will check this capability to disable TDLS
off channel when concurrent interface comes up. If this
service cap is not advertised by the firmware then
existing TDLS connection will be teared down when concurrent
interface is started.
Change-Id: I744775080a22ca8f3bc88894c349916eea27fd3a
CRs-Fixed: 3414266
Added change,
1. Define new DBR module DBR_MODULE_CBF to handle TxBF
standalone sounding CV data and corresponding ring
initialization.
2. API to extract new meta data TLV added for CV data.
3. API to handle standalone sounding complete.
Change-Id: Id28c5561bb8b3bf08de7ddd9aa2365e2ae99f1c2
CRs-Fixed: 3415627
1. Make changes to selectively send the Link control WMI to the
FW with out including the T2LM TLV.
2. Modify the TLV definitions for Link preference to use the newer
Link control TLV.
Change-Id: Id8beae8376ee5d2fb3434367530a0a6bb976597d
CRs-Fixed: 3422692
As part of 'SAP PS with TWT enabled' new
requirement add new vdev set param
wmi_vdev_param_set_sap_ps_with_twt to map host vdev
param with firmware interface new vdev set param
WMI_VDEV_PARAM_SET_SAP_PS_WITH_TWT.
Change-Id: Ia8b45ddb35657e0293cda5821b8ddc92bf68bccc
CRs-Fixed: 3421621
Add API extract_tgtr2p_table_event_tlv to extract TLVs from the response
event of rate2power table update cmd. Add a wrapper function
wmi_extract_tgtr2p_table_event and call extract_tgtr2p_table_event_tlv
from it.
Add the host event id wmi_pdev_set_tgtr2p_table_eventid corresponding to
the target id WMI_PDEV_SET_TGTR2P_TABLE_EVENTID. Also add this mapping
to populate_tlv_events_id function.
Change-Id: I0a870125120f1f92ee50002953e114b27d597ae6
CRs-Fixed: 3405417
Add 160 MHz and 320 MHz BW support for Smart Antenna.
Peer connect gets rate codes for all supported BW on connecting peer
as part of wmi_peer_ratecode_list_event. This changes add 320 MHz and
160 MHz BW support.
Change-Id: I715dd5a64c38114fef6e17c2e2f6a526e1a716c2
CRs-Fixed: 3381648
Host and FW have agreement about using fixed pdev id for CFR on HMT,
which required changes on both sides. In case only picked host
change with old FW, which will case device broken during booting up,
add this change to set pdev id base on FW capability for CFR request.
Change-Id: Iac82074228d42c6f51ea2024defdb0272e5cb396
CRs-Fixed: 3409616
The FW needs mlo_flags of partner links as well during Assoc,
to handle more than 2-link MLO Association.
Extend the peer_assoc_ml_partner_links struct to pass them.
CRs-Fixed: 3403848
Change-Id: I543442ded6b5bc55c278b32f3d449eabacc49919
Add support for vdev_param_set_profile to indicate
AP profile to FW. VDEV_PARAM_XPAN_PROFILE can be used
as bit map to support other AP profiles. So, rename vdev
param VDEV_PARAM_XPAN_PROFILE to VDEV_PARAM_SET_PROFILE
to support multiple ap profiles. Bit 0 indicates XR SAP
profile is enabled or disabled and BIT 1 indicates XPAN
profile is enabled or disabled.
Change-Id: I61c434c7a4bbba013690011c0a777af199207630
CRs-Fixed: 3401468
Add changes to read R-TWT svc bit from FW and update capabilities on
host accordingly. Update add twt session command to include new
params required for R-TWT.
Change-Id: I91cea65ef737b6fa445cb3680dac15e0f1063446
CRs-Fixed: 3399205
Extend WMI_ROAM_STATS_EVENTID event information for
requirement of:
1.Roam trigger related information, include timestamp,
trigger reason, trigger condition, abort reason,
scan type, roam status and fail reason.
2.Roam scan related information, include scan channel
number, dwell type, max dwell time of each channel
and total scan time.
3.all types of roam related frame information, include
timestamp and successful or failed status for Preauth,
Reassoc, EAPOL-M1/M2/M3/M4.
Change-Id: I1f54bc04d7cb8b083f1394989746c57c66fa29f6
CRs-Fixed: 3381545
Due to 11KV feature version update, add new enum
"WMI_HOST_VENDOR1_REQ1_VERSION_3_40" in WMI_HOST_VENDOR1_REQ1_VERSION
and convert the host enum to target.
Change-Id: Ibcd52b93b9caf3a8bbfc7fa9028664a2d3666197
CRs-Fixed: 3381254
Currently, firmware sends WMI_WLAN_FREQ_AVOID_EVENTID with set
of frequency ranges to be avoided when it finds LTE operating
around those frequencies. Host driver marks these frequencies
as unsafe and doesn't operate in SAP/P2P-GO mode.
There is a new requirement where SAP can be allowed to operate
in unsafe channels when below conditions are met,
1. Firmware advertises the capability fix_channel_priority in
WMI_COEX_FIX_CHANNEL_CAPABILITIES through ext2 event.
2. SAP is started in a fixed channel.
Fetch the capability fix_channel_priority sent by firmware and
cache it in wlan_psoc_host_service_ext2_param to support
this feature. Add APIs to cache value received from firmware in
psoc_info->info.service_ext2_param.sap_coex_fixed_chan_support
and to fetch the same.
Change-Id: I8ceb501240bc86d6b004446f9927f4402c487203
CRs-Fixed: 3381399
In api extract_roam_11kv_stats_tlv(), request token,
response token and report number are not extracted
for neighbor report.
Add support for request token, response token and
report number for neighbor report.
Change-Id: Iefe384fe760f25d6ce1870e52817c72577f0d5a9
CRs-Fixed: 3370856
Update MVR handlers and init to setup/use MVR bitmap
depending on bitmap MVR support by FW.
Change-Id: I3a73ddefeae85d8f6b4fc31f9c1f1164fa5346c7
CRs-Fixed: 3355001
This change is to allow other modules to register for
link disablement.
It includes below functions:
1- Notify link update
2- Register to handler to get link update notification
3- Unregister T2LM handlers
Added the below changes as well,
- Move T2LM related data structures to wlan_mlo_t2lm.h file
- Host receives the expected duration from FW for multiple vdevs.
Hence, add support to extract the expected duration for multiple vdevs.
Change-Id: Ie8e77d5d3b4351a8551ecd7da50786b58dad3b2e
CRs-Fixed: 3346432
Add WMI interface(WMI_VDEV_SET_TWT_EDCA_PARAMS_CMDID) to
configure EDCA/PIFS param for LL SAP.
This configuration depends on edca_param_type.
If edca_param_type is 0 then host will configure EDCA param and
send it to firmware via WMI interface.
If edca_param_type is 0 then host will configure PIFS param and
send it to firmware via WMI interface.
Change-Id: I4f2e4120a258cc4a20aabeed503709aa2ceb8ec9
CRs-Fixed: 3349467
WMI_MLO_LINK_REMOVAL_EVENTID will be sent by FW to update the Host on the
progress of the link removal operation. Add support to process this event.
Change-Id: I0c4d5b047cf062b421380f85717fac5a9bdea9c2
CRs-Fixed: 3334950
For SAE-EXT-KEY AKM with group-21 pwe, the PMK
length is 64bytes. Therefore, increase the max
size of the PMK to 64bytes in host to facilitate
PMK storage and PMK offloads.
Change-Id: I049cd14c1c71e1809b394199862409780a16371d
CRs-Fixed: 3353114
Add the service bit wmi_service_wpa3_sha384_roam_support
used by firmware to indicate the roaming support for
WPA3 SHA384.
Change-Id: I4bb4f9fd83085c48c646818124265486bae62c0c
CRs-Fixed: 3334343
Add API to parse the TID-to-link mapping event ID for the AP vaps.
As part of this event,
- Update the mapping switch time TSF value in host data structures.
- When mapping switch time or expected duration expires in the FW,
update the host data structure.
Change-Id: I93232429fe5c2aa12dc4bf9f6a2f014761b7df15
CRs-Fixed: 3350697
Add support for vdev level WMI Command and event to send
and receive t2lm ie info
CRs-Fixed: 3339695
Change-Id: I8b896a961cba8f1d8e11111f900a98da090b9513
Currently if ENABLE_HOST_TO_TARGET_CONVERSION is defined,
host pdev/vdev set params can be translated to
target pdev/vdev set params through APIs
convert_host_pdev_param_tlv,convert_host_vdev_param_tlv.
If ENABLE_HOST_TO_TARGET_CONVERSION is not defined,
host pdev/vdev set params in
common code is sent to firmware directly, which is incorrect.
Define pdev/vdev set params in such away they represents
host params on ENABLE_HOST_TO_TARGET_CONVERSION enabled and
target params on ENABLE_HOST_TO_TARGET_CONVERSION disabled.
Change-Id: I5718c76c351b2d7904d8bf8b603073ffcb0a039d
CRs-Fixed: 3321556
Add common code to configure target AFC flags:
enable_6ghz_sp_pwrmode_supp, afc_disable_timer_check,
afc_disable_request_id_check.
Remove cfg_get set is_afc_reg_noaction code, add it to psoc regulatory
private data.
Add APIs to set and get these AFC configures.
Change-Id: Idf74b245113eee18b071a7fbb92bb151cd535ce8
CRs-Fixed: 3154185
Critical update is the explicit signaling for STA to notify
any change in BSS param.
Present support is there for beacon, host notify to FW by
updating current link CU param in wmi_bcn_tmpl_ml_info TLV
of BCN TMPL CMD by setting the corresponding cu_vdev_map
for category 1 / category 2 based on change in critical
update params of ML VDEV.
The same Critical update signaling is extended to 20TU
unsolicited broadcast probe response.
In 6 GHz link host notify the same category 1 / category 2
cu_vdev_map critical update params of ML VDEVs in 20TU
enabled group wmi_prb_tmpl_ml_info TLV of WMI_PRB_TMPL_CMD.
CRs-Fixed: 3314429
Change-Id: I84dbd1901c5a3f2ef28f981c581fd7350d147829
Add WMI support for WMI_SERVICE_EIRP_PREFERRED_SUPPORT service bit,
which indicates that the target prefers EIRP in the
WMI_VDEV_SET_TPC_POWER_CMD_ID.
Change-Id: I1433bd698e124336082e12f509f271c9dd7df40a
CRs-Fixed: 3307372
