Image session should run as fast as possible mode and dynamic
framerate detection is not applicable for image session. So
added change to disable that feature for image decode session.
Change-Id: Ifcfeb24d1f70009ba48e9ade77bd765c1b0e8fd7
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Increase vpp cycles to bump frequency to 366MHz
for encoder 960fps use case.
Change-Id: If0f9d0f084dfcefa9f8614ec6774588dec6b7007
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Signed-off-by: Priyanka Gujjula <pgujjula@codeaurora.org>
As per vperf sheet, VSP FW Overhead factor(1.05) needs
to be applied to both entropy mode CABAC & CAVLC.
Change-Id: I93dc00137e0633ac2a79862c58970ba43b515ad6
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Signed-off-by: Priyanka Gujjula <pgujjula@codeaurora.org>
Decoder base cycle requirement of B frames has increased to 80.
Also, updated cycle count requirement for Encoder HIER B usecase.
Pulled from CL: 3302650.
Change-Id: I0f56166b7261e161630feeb8793473491dacccd7
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Accessing vcodec subsystem registers without video core clock enabled
will result in register access errors. Core clock might have been
already disabled by video firmware as part of inter frame power collapse.
So do not read vcodec noc error log registers from video driver.
Change-Id: I19a32c377c661aa848fbd463ae59159cca4cfe04
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
1. Calculate framerate based on buffer timestamp
2. If framerate changed and stable for 2 frames,
update it to firmware and in driver internally.
Change-Id: I7feda86dec8fcfc1dff6defac8c15a97c1b8393e
Signed-off-by: Priyanka Gujjula <pgujjula@codeaurora.org>
Client can choose to run an encode session to acheive maximum
performance rather than maximum quality.
Add the handling to configure video core accordingly for the
configured video session.
Such configuration is only applicable for non-realtime session.
Change-Id: Ife290b377c844e5b1d3be93b2509c787f8e05c59
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Amend power on and off sequences for iris2 video hardware.
Change-Id: Icada0b95ba5990a6911803ee9fa650a296c357db
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
- To determine if session is admissible, check only the
decoder input width/height and encoder crop width/height.
- Update session MBPF Calculations.
- Amend work mode setting to consider decoder input width,
height and GOP size.
Change-Id: If4053c222de2a55ad5b85a8ab96c12c47b145aa3
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Priority level was not determined at few sequences.
Determine the priority level and set to firmware, if
there is a change in driver and firmware priority.
Change-Id: I97861fd4ce8cfb7cf828a8da9a5ce8ba900280ef
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Currently driver prints hex values for codec type, pixel
format and port number. So added change to print strings
instead of hex values.
Removed unnecessary logs to avoid overlogging timeout
issues.
Change-Id: Ia44401990797dc20eae0a35631e9ed6a0b094c20
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Encoder supports downscale with scaling ratio upto 1/8 of width
and 1/8 of height. So added necessary scaling checks at streamon.
Change-Id: I3a29b43c79cf4e693ba2c0d9f98ec24410d50fbd
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Use bitstream fps in clock and bus vote calculation, if
bitstream detected fps is higher than client set rate.
Change-Id: I58fa1a8725086c112796b3ce5172a39f322e178e
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
adjust MAX_MAP_OUTPUT_COUNT based on resolution
to enhance performance and reduce memory pressure.
- For 8K session: count = 20
- For 4K session: count = 32
- For 1080p session: count = 48
- For all remaining sessions: count = 64
reduce MAX_DPB_COUNT to 32.
reduce DEFAULT_MAX_HOST_BUF_COUNT to 64.
Change-Id: I0e6d25121947524b843e9cce96b75871aba174af
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
[1] Added return type to strict_check() api and bail out if
strict_check fails.
[2] Fix all the failures with #1.
[3] Added WARN_ON() for strict_check failure.
[4] Ensured &core->lock is acquired before calling below api's.
- __write_register
- __write_register_masked
- __iface_cmdq_write_relaxed
- __suspend
- __resume
- venus_hfi_core_init
- venus_hfi_core_deinit.
Change-Id: I7f0a3ca6c2aec2758220c90bff9260367f10820b
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
In low latency mode, for a decode session, low latency
is being configured properly. But the log still indicates
that low latency is not enabled. The change fixes the same.
Change-Id: I65a88fb6dff639dd78522316e839fc05d43ec39c
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Added change to address below 2 issues.
[1] buffer_counter is not getting incremented for batching usecase,
it always runs with max clk and bus votes. So moved buffer_counter
increment logic to msm_vidc_queue_buffer, so that it will be used
for all usecases.
[2] iris2 clock calculations were using core->capabilities but all
needed infos were present in inst->capabilities. So junk values from
core->capabilities was used in clock calculations and values always
shooting to highest corner.
Change-Id: I0927899244b5de2bd46d238100fdaecd78c6fe28
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
- enable conditional compilation based on defconfig
- compile only needed files based target & vpu variant
- enabled stubs to avoid compilation issues, for all
target variant and vpu types
- add support for qcv(same lunch combo) for different
PT & VT chipsets.
Change-Id: Ic446349fd1532885d7a2e94895d807c62f1ab6e4
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Handled below items as part of this change.
- print buffer_name instead of hex value.
- enable dcvs only for realtime sessions.
- enhanced max_input_data_size handling at
msm_vidc_scale_power.
Change-Id: If5ac810f4e020bee54364161596c5547af94161a
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Following changes are added with this:
1. Handle and adjust session priority.
2. Session addmission based on priority.
3. Power (clock and bus) scaling based on priority.
4. Handle s_parm influence on priority.
Change-Id: I12dec5fb03d733f07b0b0a24b4d74d1ccd4bf791
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Remove separate fault_work_handler and print all needed
debug info as part of smmu_fault_handler callback itself,
to avoid race between fault handler invocation and core
deinit sequence.
Change-Id: Ib47e3d457a5a3e33497c71d5920382cb43baed79
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Initialize subscribe parameters before input port settings
change event from firmware to avoid uninitialized subscribe
params usage in video driver.
Change-Id: I39a1e6646a845836a406193ace7a5fb71edee192
Depends-On: I07c7c8b4faaccc896249b2da84148ec05c2047da
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
As per HFI_PROP_CODED_FRAMES details, 0x0 is field interlace,
0x1 is progressive and 0x2 is adaptive frame field bitstream.
Treat 0x1 as progressive and both 0x0 and 0x2 as interlace in
driver.
Change-Id: I07c7c8b4faaccc896249b2da84148ec05c2047da
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
