If INI is enabled don't derive first link's MAC address
and directly use MLD address in that place and derive
next link addresses.
Change-Id: I3c2b9f64df3f75799adf8718ee83d157f6dd9097
CRs-Fixed: 3584062
At present, the link removal flag is in vdev object, but vdev may
repurpose to other link, the link removal flag has to be in link
info struct.
Add link removal flag in link info data struct and remove
it from vdev struct.
Change-Id: I6116e89f2bb065979f4e405ef0fac386abebcf17
CRs-Fixed: 3572836
Supplicant sends SET_MAX_BANDWIDTH driver command to update
connected channel width dynamically.
Host should update connected bss rate flags so that host
can send proper cp stats as per updated channel bandwidth.
Change-Id: I676635b108f91f4fd8471fbe66352aa471dd9a9f
CRs-Fixed: 3519930
Extract aux device capability and store it in wma/hdd/mlme.
current only 1 aux supported so only save info
for aux0.
Change-Id: Ib19bad6cf3c0bda5a31ea4993a2f7e587b2043e2
CRs-Fixed: 3549751
Add support to dynamic enabling the TDLS.
Vendor subcmd: QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE
Change-Id: I3b9164ba04a4d9c23d7f580020966c222f8bd359
CRs-Fixed: 3562148
Add support to send whether currently TDLS is available or not.
Vendor subcmd: QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS
Vendor attr: QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_AVAILABLE
Also add support to get the TDLS number of active sessions
using below vendor attr.
Vendor subcmd: QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS
Vendor attr: QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_NUM_SESSIONS
Change-Id: Ie9ad09de9593559c4d57599a9af58a95af99e60f
CRs-Fixed: 3554429
During VDEV creation, vdev parameter "DISABLE_2G_TWT"
is populated in accordance to the value of ini
"enable_twt_24ghz" in order to indicate FW
to support TWT for 2.4GHz band.
Change-Id: I610bbaad3c5d12a8303939488ed2d7486dda404f
CRs-Fixed: 3560288
With these APIs, vdev connection is effected by the
WIFI standard version. For example, if wifi_std is
wifi6, then the connection will not use 11be feature.
Change-Id: I8f762f9cf16d876d5cf2847561b61c11a23e97b5
CRs-Fixed: 3554305
Add API to restore or clear user set link num when SSR or
interface down happens.
Change-Id: I955937817481740dc3dd75b51d669ed36b5f74d2
CRs-Fixed: 3531260
As 320 MHz wideband scan is not supported host splits 320 MHz
bandwidth into two 160 MHz scans. Currently, none of these
two 160 MHz wideband scan requests carry the pri20 sub-band
frequency of the connected 6 GHz ML link.
Due to this, DUT is not able to receive beacons sent by 6 GHz
AP (AP sends beacons only on primary 20 MHz freq).
The fix is to fill the pri20 sub-band freq of the connected
6 GHz ML link as one frequency in the wide band scan list
request.
CRs-Fixed: 3552131
Change-Id: I3da18d5801fb7af84b6e20b8134af2d738cc57e1
Save EPCS Capability in psoc instead of vdev to avoid the value
lost when random MAC setting happends.
Change-Id: I35299da59156dc1197adaa3350b0d11255b76c2e
CRs-Fixed: 3551773
Add support to inform peer enable/disable UL_MU
support in STA mode using OMI frame.
Change-Id: Ie12f4991654f7504802b4ae0fbdd26aecda1ee63
CRs-Fixed: 3546176
Extends the wmi_service_ready_ext2_event_fixed_param
structure with a new field to support N-link MLO
connections.
The host will now calculate the maximum number of
links per MLD value by intersecting the firmware
capability and the ini value present in MLME component.
And this calculated value will be stored in the MLME
component.
Change-Id: I89bf3553781cd809cdb5496fbf0f68e59569033a
CRs-Fixed: 3512343
Move SR changes from WMA to Target_if and remove
WMA api's which was previously using to update
SR threshold.
Change-Id: I219cd56195471df561a5789fb235e375a14e756c
CRs-Fixed: 3374674
Add vendor command API to set EPCS (Emergency Preparedness
Communications Service) capability and trigger EPCS
function enable or disable.
Change-Id: I2ffe4d268731c57dd6e3ddfe0586d4dcb77dc611
CRs-Fixed: 3511170
The issue is host always uses assoc link channel width
to calculate the list of the channel(s) to trigger
wide band scan for both links.
In the case of N link MLO connection, the associated
channel and associated channel width may be different
for assoc link and non-assoc link(s).
Fix is to choose the proper associated channel width
and prepare the channel list for each link(s).
Change-Id: I2fce5d1153d396f1bfc9575572d90d2cfec0ac8a
CRs-Fixed: 3539444
In api mlme_connected_chan_stats_request(), dereferencing
of freed pointer is observed by static analysis tool.
Remove dereferencing of the freed pointer in the api
mlme_connected_chan_stats_request().
Change-Id: Ic09b68395a9c3c67aab4a704a915b0d92a00e16d
CRs-Fixed: 3530020
Add vendor command support to configure MLO and EMLSR mode
capability configuration for EHT testbed and DUT STA. It
includes EHT OM control support, EMLSR padding delay
configuration, enabling STR MLMR mode, forcing power save
on active MLO links for a defined number of beacon periods,
forcing active MLO links, and invoking EMLSR mode entry or
exit.
Change-Id: If4fb2c576b789aa2e28d6742a02ebdc01eb6e994
CRs-Fixed: 3507770
Disable BSS color collision detection for the following-
- Testbed STA for all modes
- STAUT if EHT mode is EMLSR.
As part of BSS color collision detection, scan is invoked in
FW after the defined detection period and as part of this,
EMLSR exit happens in the middle of tx/rx. Thus, disable the
capability for EMLSR mode.
Change-Id: I6417f7c081c1408372924b20d8985a597a536e27
CRs-Fixed: 3507796
Add check to determine whether FW support multipass
SAP before enabling multipass support
Change-Id: I7db5a7bad6b9ac89c8c4e7c4c177695671402657
CRs-Fixed: 3515310
Update Preamble Puncturing INI parameter "he_rx_pream_punc" to
default which gets from FW.
Also update the cfg HE 2 GHz and 5 GHz capabilities parameters
instead of memcpy.
Change-Id: If424ce4a4fe771a2817677a50a472a2c77529d90
CRs-Fixed: 3515585
Set MAX supported BW for STA so that the device can connect
to APs which are advertizing 20 MHz in beacons but increases
in association response and next beacon.
Change-Id: I8ed418382f696c7461235996c4e90201cafafcb3
CRs-Fixed: 3415718
Process GET_CU_FOR_EACH_SUB_BW request from the upper
layer in case DUT is connected with a channel width
of 40 MHz and the connected frequency is in the 2 GHz
band.
Change-Id: Idc748f83af72baed946340c61d5c6a0bba1baf00
CRs-Fixed: 3506871
When link removal TBTT expires, indicate the link removal
info to upper layer by vendor event.
Change-Id: Iccc13898f76648bfa2167669c966538d95df5fe3
CRs-Fixed: 3482159
Add support to boost or reduce MLO scoring with
mlo_tp_preference_percentage ini.
Change-Id: I0a1280fe259d9e65e5f0f991d456f650b9d1be69
CRs-Fixed: 3456412
Add function wlan_mlme_convert_he_op_bw_to_phy_ch_width, check 80+80 or
160 with ccfs0 and ccfs1.
Add 20M/40M check for vht bw with prim chan id and ccfs0.
Change-Id: I01a407358d7c310f92c8a69004ebb002b615438a
CRs-Fixed: 3511291
Chan width 1 in vht operation means >=80M, while chan width 1 in eht op or
he op means 40M, need be handled in different way.
Change-Id: Ib65dca6245c33f07df351b6ac7eed86f91b372c7
CRs-Fixed: 3506080
When ANI_LITTLE_BIT_ENDIAN is not defined, a compiler error is
flagged in the definition of struct mlme_ht_param_info due to a
misplaced #endif, so relocate it.
Change-Id: I72df79a1dfae84c2cd6797d1d112de6ef8ca7ef6
CRs-Fixed: 3498279
Host parse newely added vendor command
QCA_NL80211_VENDOR_SUBCMD_CONNECTED_CHANNEL_STATS and trigger
scan to get connected channel stats from FW in case of MLO
connection.
On scan done host sends scan done indication to upper layer
via QCA_NL80211_VENDOR_SUBCMD_CONNECTED_CHANNEL_STATS vendor
command.
Change-Id: Iff09b6dfe88b5f075a4c81d8f0bfff5bbb0fedaa
CRs-Fixed: 3491058
Add a new cfg item to drop connection request if
AP is operating in 6 GHz SP mode and STA doesn't
support SP mode but supports VLP mode.
Change-Id: I0f20d63f68b2424390ca424188f95f26971c9ada
CRs-Fixed: 3470602
relaxed_6ghz_conn_policy cfg item is no longer needed
with new regulatory policy as there is no dependency
on STA, AP country code to find 6 GHz power mode for
connection and also connect request should be rejected
if AP is advertising VLP and STA doesn't support VLP.
Hence remove this cfg item and the related APIs.
Change-Id: I3a48a3c6343e57f4f2386ebbab1f88d5052af505
CRs-Fixed: 3470571
Roam background scan abort, driver print roam result
failed, but current ap is still connected.
Change roam abort background scan log instead of fail.
Change-Id: Ia10f010e8c353b12bdbbe0407c8e3d30b1ea45c2
CRs-Fixed: 3469290
As per requirement, for MLO connection host should reject
GET_CU_FOR_EACH_SUB_BW request and return failure to upper
layer as a response.
Change-Id: I8177d92982c832a17c1657239b69cc3712e1eaf4
CRs-Fixed: 3476349
If STA connected with MLO AP, don't process ch_width update
with notify request.
Change-Id: Id2e0d6357feac13787abcafe8b9d69a0c64dbedb
CRs-Fixed: 3472173
Host receives QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_WIDTH vendor
command indication to update STA adapter channel width.
On receiving channel width update indication from upper layer,
first host updates internally and send new channel width value
to FW via WMI_VDEV_PARAM_CHWIDTH_WITH_NOTIFY.
Target firmware should take care of notifying associated peers
(except TDLS) about change in bandwidth, through OMN/OMI
notification before performing bandwidth update internally.
Change-Id: I517ed1fbf8d074e511f8fb43c9c1dac824c9f084
CRs-Fixed: 3469473
To process get_cu_for_each_subbw request from upper layer,
host needs to trigger scan for initial connection ch width
on every get_cu request.
Change-Id: I2bbf20c9207f46983b14dcd95bf81f32cfd7c060
CRs-Fixed: 3466958
eMLSR + NAN concurrency is not supported currently, so handle it
as mentioned below
1. eMLSR+NAN: If NAN is coming up when eMLSR is active, disable
one ML link so that eMLSR gets disabled.
2. NAN+eMLSR: If eMLSR is coming up when NAN is already enabled,
disable one link so that eMLSR doesn't get enabled.
Also, cleanup the APIs to carry a generic flag to indicate that
a concurrent connection is coming up instead of mode specific flag
as there is no dependency on modes to handle concurrency.
Change-Id: I625f8b18f9d7e991922d22af53f3e8743a3727bd
CRs-Fixed: 3443900
Stub exist for functions that does not exist. Was introduced as
typo that was fixed. Remove the stub.
Change-Id: I59797783ddec41f2afc08bae49191c13500b02fa
CRs-Fixed: 3441916
Obsolete TWT functions are still called in driver. As part of
removal, Remove these functions and use component function.
Change-Id: I9f8b4186753ec9d446399be9e1cfc03a63a17391
CRs-Fixed: 3294868
Disconnection is logged even if keepalive indication is
sent to host after firmware sending final beacon miss
event.
Add two new roam failure reason code to indicate roam
failure and send final beacon miss.
ROAM_FAIL_REASON_NO_AP_FOUND_AND_FINAL_BMISS_SENT: Indicate
roam failure when no ap is found and final beacon miss
is sent.
ROAM_FAIL_REASON_NO_CAND_AP_FOUND_AND_FINAL_BMISS_SENT:
Indicate roam failure when no candidate ap is found and
final beacon miss is sent.
Change-Id: I6d7a6034f8be5388dd35dd3c05fecfd40a8d888d
CRs-Fixed: 3437060
In CFG_SAP_PS_WITH_TWT and CFG_DISABLE_SAP_BCN_PROT,
passing value as string instead of numeric.
Causes wrong value while macro expansion.
Passing enum value of false in CFG_SAP_PS_WITH_TWT and
CFG_DISABLE_SAP_BCN_PROT.
Change-Id: Ib8b297ef69cebb71c1e6645f49a75e79393b8c94
CRs-Fixed: 3440741
Currently, policy_mgr_is_ll_sap_present api is used to check if
ll sap is present or not but different operations may be required
for HT and LT LL AP policy example for LT policy i.e gaming/loss
less audio MCC is acceptable but for HT MCC is strictly prohibited.
So, wrapper functions are added to check HT, LT and any AP policy.
Change-Id: I93dbcd65b1a102d0f879366db26f3d2cf01e030e
CRs-Fixed: 3435203
