Donot advertise TB and NTB ranging support as kernel
doesn't support that flags.
Change-Id: I43ba16a7130dfc570c371db8474bbc136e576173
CRs-Fixed: 3233041
Define QCA vendor interface for PASN offload to userspace from the driver.
The driver can send this command as an event to a userspace component to
perform PASN authentication with a list of peers with which the driver
needs to do ranging. The userspace component, if capable of performing
PASN handshake, can perform PASN handshake with all the peer devices and
set the relevant keys by sending the
QCA_NL80211_VENDOR_SUBCMD_SECURE_RANGING_CONTEXT command for each peer
to the driver.
Once PASN handshake is completed with all requested peers, the userspace
component sends consolidated status for all the peers to the driver. The
consolidated report is required for the driver to understand that the
PASN handshake process is complete and whether it succeeded/failed for
each of the peers it was requested for. The secure ranging context is
configured only for the peers with which the PASN handshake succeeded.
When the driver requests PASN keys, the userspace component can set the
keys from its cache if those keys have not already expired and were
derived with the same source MAC address that is requested by the driver
instead of doing the full PASN handshake again.
If the driver detects that current keys of a peer are not valid anymore,
it sends a notification to userspace using the
QCA_NL80211_VENDOR_SUBCMD_PASN command and setting the action to
QCA_WLAN_VENDOR_PASN_ACTION_DELETE_SECURE_RANGING_CONTEXT. The userspace
component should delete the corresponding keys from its cache.
Change-Id: Ib6e2c7baf7728dacf0303513c5a41412dae40b8b
CRs-Fixed: 3224160
Vendor command to get the WLAN radio combinations matrix supported by
the device which provides the device simultaneous radio configurations
such as standalone, dual band simultaneous, and single band
simultaneous.
Change-Id: Ic3fb07ede1b716a08c476292446dae3d6ad73ee5
CRs-Fixed: 3214052
Add a new QCA vendor attribute
QCA_WLAN_VENDOR_ATTR_ACS_LAST_SCAN_AGEOUT_TIME to
QCA_NL80211_VENDOR_SUBCMD_DO_ACS and opportunistically optimize time
taken for ACS scan. Avoid scanning the channels which were scanned
within last QCA_WLAN_VENDOR_ATTR_ACS_LAST_SCAN_AGEOUT_TIME milliseconds
and use scan results from scan results cache for ACS scoring. For other
channels, perform ACS scan and use the received scan results.
Change-Id: I5f57002566870fea7444358711205392e5e84053
CRs-Fixed: 3226134
Register OSIF callbacks with Wifi_pos module to initiate PASN
authentication request.
Call cfg80211_pasn_auth_request() to initiate PASN authentication
from wpa_supplicant for the list of secure peers.
Change-Id: I52b9518526f1b04ad520f2f19c7a4caa9b62b6b0
CRs-Fixed: 3149968
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_CMDID: Add support
for a new roam command to get vendor control parameters
from FW. Host needs to send proper param ID in command
(from enum WMI_ROAM_GET_VENDOR_CONTROL_PARAM_ID)
to get corresponding INI value from FW.
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_EVENTID:
Add support for a new roam event to get param value
from FW. FW sends this event upon receiving
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_CMDID command.
Change-Id: Ic7b3badb14daff183dd36927b4dae6bbc036e6cd
CRs-Fixed: 3225166
Update the connect request crypto parameters based
on the new kernel changes to increase the size of the
akm_suites array in connect request
Change-Id: I6e9cecdb6fa02da5f2b2e238780d3f0fb389c8a2
CRs-Fixed: 3214567
Add QCA vendor event to indicate user space that the driver
recovery is completed after the internal failure.
Change-Id: Ib65c9773dd64fab36ba10493c27bd670c2bb6d08
CRs-Fixed: 3226415
Add attributes to indicate reassociation request and response events from
driver/firmware.
Introduce new attribute for Association ID.
Add support to listen for BT Coex for SCAN DONE diag event.
Change-Id: Ieedd0d154cd3287aca23c03ca573b87e8127726e
CRs-Fixed: 3221625
When the SSR and interface down happen in parallel,
the driver rejects the interface down since the
recovery is in progress. Kernel ignores the -EAGAIN
request from the driver and as part of NET_DOWN notification
in cfg80211_netdown_notifer the kernel invokes the
___cfg80211_scan_done to free the request but doesn't not send
scan_result indication, since it expects the scan_done work to
get scheduled and then broadcast the request to upperlayer.
The scan done checks currently only if the interface is up replace
it with driver specific internal driver state.
Change-Id: I0e5ac319783b9c1a69e7e19674f76f20da1d1590
CRs-Fixed: 3202812
Add QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_11BE_EMLSR_MODE
value to allow or disallow eMLSR hardware mode for 802.11be
MLO capable devices. If this attribute is set to 1, and if
the FW supports this capability too, then the STA host
advertises this capability to AP over assoc request frame.
This attribute will not have any effect on legacy devices
with no 802.11be support.
Reference - https://w1.fi/cgit/hostap/commit/
?id=563162a5f521965e582acc32d7ce3034fa8fb32e
Change-Id: I4ae2cbbc6adcfef8fbc225bef60b3597771786f7
CRs-Fixed: 3185027
Need to indicate which Linux Kernel contains support for this feature.
Add logic to set back port flag based on linux kernel version.
Change-Id: Icea20b82c0d6c2d546711214c5b268bee864fc72
CRs-Fixed: 3194602
Extend the peer queue flush command with following attributes
1. Enable to flush per TID peer queue
2. Enable to configure when to flush the peer/TID queue
Change-Id: I1c8a9ca82cdfdd67eaf69b73a8a7076ca9c02dab
CRs-Fixed: 3130761
Currently 6 GHz channel flags are not set for channels
present in the list from PNO scan request but are set for
all other 6 GHz channels which are added when either of the
two below conditions are satisfied
1. Userspace sets NL80211_SCAN_FLAG_COLOCATED_6GHZ flag
in PNO scan request.
2. At least one 6 GHz channel is present in the PNO scan req.
Add flags for channels in the PNO scan request based on the
scan_mode_6g ini configured similar to active scan request.
Add changes to remove the RNR flag for the channel if the
corresponding short SSID entry is present in the RNR db
Cache since if colocated SSID is different userspace doesn't
include corresponding 2.4/5 GHz channel information in PNO
request.
Change-Id: I22c4f7ecf65d4ab09dfbbe126aefe02f9145de42
CRs-Fixed: 3119113
Count the MLO vdevs in a pdev. WLAN_VDEV_FEXT2_MLO feature
flag in vdev object is set for all MLO vdevs. Simple solution is
to increment/decrement the count on every set/clear of
WLAN_VDEV_FEXT2_MLO feature flag. Since this feature flag will be
set/clear at multiple places for a given vdev, this approach
will lead to wrong MLO vdev count. To fix this we need to
increment/decrement the count on first set/first clear of
WLAN_VDEV_FEXT2_MLO flag. Add a lock also to prevent the race
conditions.
CRs-Fixed: 3106235
Change-Id: Ice7edde04553088fbb7c9b769508d441ccd6e4bf
This change is to vendor attribute for peer TID flush vendor
cmd QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING.
Change-Id: If112ec288a64622b9bf7fe625f7ac9e127d0ecbe
CRs-Fixed: 3170381
Add support to reset eLNA bypass configuration to default behavior.
If value of 2 is configured, the driver can choose either to
disable/enable eLNA bypass control and there is no enforcement
from userspace.
Change-Id: I813abe5beda49e394ff381aae57c78069ca28784
CRs-Fixed: 3172147
Add a QCA_WLAN_VENDOR_FEATURE_USE_ADD_DEL_VIRTUAL_INTF_FOR_NDI
flag to indicate that the driver requires add/del virtual interface
path using the generic nl80211 commands for NDP interface create/delete
and to register/unregister of netdev instead of creating/deleting
the NDP interface using vendor commands.
With the latest Linux kernel (5.12 version onward), interface
creation/deletion is not allowed using vendor commands as it leads to a
deadlock while acquiring the RTNL_LOCK during the register/unregister of
netdev. Create and delete NDP interface using NL80211_CMD_NEW_INTERFACE
and NL80211_CMD_DEL_INTERFACE commands respectively if the driver
advertises this capability.
Change-Id: Icb1782b147cf7ef7fed7bb4ba28ece23d4b0dc21
CRs-Fixed: 3167119
Add support for new QCA nested attributes to pass the AFC channel
information as part of the external ACS request command,
EXTERNAL_ACS_EVENT_CHAN_INFO.
Change-Id: I9ab4b8bfce64ea31226dad90f39bee22086b94d9
CRs-Fixed: 3152230
Currently, host supports max 2 number of AKMs in connect req.
Add support for max 5 number of AKMs in connect req from
userspace.
Change-Id: I889124257c374092128e92f0f1eca1e1d0711f49
CRs-Fixed: 3151412
Use NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE instead of
NL80211_EXT_FEATURE_PROTECTION_OF_RANGING_NEGOTIATION.
Also remove NL80211_EXT_FEATURE_SECURE_RTT advertisement
which is not required.
Change-Id: I5ba3da86125719f410c925ef40441acddc40ab9a
CRs-Fixed: 3154060
Add support to set 11az ext feature flags
Read the firmware capability for 11az features and
advertise the corresponding wiphy flags.
Change-Id: I85f6cc2f65a5d9892830f66a726cffc823093bca
CRs-Fixed: 3150584
Add kernel timestamp attribute in enum qca_wlan_vendor_attr_diag
for subcmd QCA_NL80211_VENDOR_SUBCMD_DIAG_DATA to send it from
driver to userspace. Also, QCA_WLAN_VENDOR_ATTR_DIAG_HOST_TIMESTAMP
attribute indicates the system timestamp but is documented as kernel
timestamp wrongly. So correct the documentation of this attribute to
reflect the correct behavior.
Change-Id: I9559345185cb75ae6adc6792126fc6679b089e5d
CRs-Fixed: 3150783
Add QCA_WLAN_TWT_NOTIFY command type to send event to userspace when AP
changes TWT required bit field in its capabilities.
Change-Id: I6333213f4e8ca4fe9ca637db287759fd6c6622f4
CRs-Fixed: 3143525
Add support to receive the fft_recapture arg value
from spectraltool, handle the FFT recapture config and
pass this to FW. The recapture feature must be
enabled only for spectral scan period > 52 us and
Normal Spectral scans.
Change-Id: Ied637704d25bb15bff2139a215da7481d4f80e4f
CRs-Fixed: 3140890
Currently driver is doing unlink BSS when there is a connect failure.
This will cause an issue, for 2G+5G ML connection.
1) Connect on 5G link failed due to Auth failure
2) Connect on next candidate (2G) is success and FW is in SMM
3) Partner link(5G) connect will fail due to 5G scan entry won't
be found in SMM mode.
To avoid this, don't unlink the BSS for ML VDEV connect failure.
Change-Id: Icaa8c736d9038c971b5c3d459fd4af5a833bdc80
CRs-Fixed: 3129726
Add a new wrapper wlan_cfg80211_register_netdevice() that calls
cfg80211_register_netdevice for Kernel 5.12+.
Change-Id: I17655f1e3123d663d25b9dfc82e7c6f737486391
CRs-Fixed: 3133310
Introduce a new vendor command QCA_NL80211_VENDOR_SUBCMD_RATEMASK_CONFIG.
This is used to set the rate mask config to be used in mcs rate selection
per PHY type.
Change-Id: I013a547be89dac187bc48531a674f3dde8a3f6e9
CRs-Fixed: 3137604
Add support for the QCA_WLAN_VENDOR_ATTR_PEER_NDPE_SUPPORT
and QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_ID vendor attributes
in the driver.
Change-Id: I8835f363f8327315c9ec91acfb3770cd3313f572
CRs-Fixed: 3128863
While notifying the ML connection status to the supplicant, partner vdev
information will be filled in the connect response. This partner vdev info
is populated using partner link IDs. This may cause issues since it is
not guaranteed that link id information in the partner vdev is valid while
notifying the connection status to the supplicant.
To address this, get partner vdev information using vdev ID instead of
link ID.
Change-Id: I5e45b038b1fe5b6ab9c6bbb514eefb0ad4c39e66
CRs-Fixed: 3117702
Add QCA_NL80211_VENDOR_SUBCMD_MCC_QUOTA. When two or more interfaces are
active on the same band and two different home channels (MCC), the
target may allocate quota of "on channel" time for each home channel.
The target will indicate the quota information to application layer with
this event. Application may do TX bitrate control based on the
information. The user may also set the MCC quota for an interface by
using this command.
Change-Id: Ic8d8c5a5f2a6f0c55fd46394fa8e2062a37abefc
CRs-Fixed: 3101791
Currently the moderate latency level is not used. Rename the moderate
latency level to XR latency level to be used in XR (extended reality)
applications.
Change-Id: Ie5ca8983c17800131bb554dbb14f5cf94023aa1c
CRs-Fixed: 3128109
Add a QCA vendor netlink interface to start/stop periodic TSF sync
feature and also support configuration of interval value as part of TSF
sync start command. In addition, improve documentation for the related
attributes and values.
Change-Id: Ia39609a3cc72c0194fe4685e43f08f1c49f8b412
CRs-Fixed: 3108416
Currently wlan_cfg80211_mc_cp_stats.h file is present at
qca-wifi-host-cmn/cmn/os_if/linux/cp_stats/inc.
With this change, move file to qcacld-3.0/os_if/cp_stats/inc
as this file contain MCC specific code.
Change-Id: I6017e1f2b136da3a1de2965a37c56c9477941d79
CRs-Fixed: 3108258
First host checks below two things in PNO scan request:
1. Userspace sets NL80211_SCAN_FLAG_COLOCATED_6GHZ flag
in pno scan request.
2. At least one 6G channel is present in the pno scan req.
If any of above conditions satisfy, Host fills all remaining
(other than channel(s) present in pno scan req) valid 6 GHz
channel(s) to pno scan requests and set the flag
FLAG_SCAN_ONLY_IF_RNR_FOUND for each remaining channel(s).
Host sends this updated channel list via WMI command
WMI_START_SCAN_CMDID_param_tlvs->channel_list for pno scan
to firmware.
By this driver allows Firmware to scan 6G channels based on
RNR IEs only (for colocated APs reported by 2.4/5 GHz APs).
Change-Id: Ib6118c4525e9fbe233eb6a7e07a4a3345d486e8a
CRs-Fixed: 3103923
Currently driver just cancels the scan request and does not free
scan request memory if netdev is NULL or get vdev ref fails,
which leads to memleak.
To address abobve issue, free the scan request if netdev is NULL
or if get vdev ref fails.
Change-Id: Id6605e76a8c0977df93428f2aeb73c0bdfb84685
CRs-Fixed: 3107784
Add additional attributes in QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT
vendor sub command to avoid usage of unsafe frequencies on wifi
interfaces sent from userspace to the driver/firmware.
The driver/firmware shall use restrictions and power cap accordingly
to restrict the usage of these frequencies on operating interface(s).
Change-Id: Ib2234137e436f1ddfe1163aed6e1d4b291f19aa8
CRs-Fixed: 3098836
Add QCA_WLAN_VENDOR_ATTR_ACS_EHT_ENABLED flag attribute to conduct ACS
for EHT mode. The driver can consider EHT specific parameters such as
puncture pattern for ACS when this flag attribute is indicated by
userspace.
Change-Id: I9cb0b7a6bc830a5f4f01a7a7fa5212cc6b2c3a95
CRs-Fixed: 3108987
First host checks below two things in host scan request:
1. Userspace sets NL80211_SCAN_FLAG_COLOCATED_6GHZ flag
in host scan request.
2. At least one 6G channel is present in the host scan req.
If any of the above conditions satisfies, Host fills all
remaining (other than channel(s) present in host scan req)
valid 6 GHz channel(s) to scan requests and set the flag
FLAG_SCAN_ONLY_IF_RNR_FOUND for each remaining channel(s).
Host sends this updated channel list via WMI command
WMI_START_SCAN_CMDID_param_tlvs->channel_list for host scan
to firmware.
With this change, driver allows Firmware to scan 6G channels
based on RNR IEs only (for colocated APs reported by 2.4/5
GHz APs).
Change-Id: I2d9d2aac58bbc521b2476756d5919647bdc265cc
CRs-Fixed: 3103873
Add support for a new QCA attribute to pass the puncturing
bitmap as part of the DO_ACS vendor command.
CRs-Fixed: 3102366
Change-Id: Ic0e54d82e48bae695baf3be4fd388ec15f81a416
