Move prealloc DP descriptor types to QDF so that
the macros can be used in HIF layer.
Change-Id: I3de60876735e5aa37d80e9e698a86503b18574c1
CRs-Fixed: 3502615
Currently the CMEM allocation code is duplicated
for Cookie conversion and FISA.
Cleanup the CMEM allocation code.
Change-Id: Ifdb912fe464abaa7be0ab8b2294155984dbd662e
CRs-Fixed: 3504668
In WBM2SW Rx Error path for BE
specific functionality
1) HAL API's/Function pointers are replaced
with specific function calls.
2) Efficient read/write of WBM Error Info
from HAL Rx desc.
3) Minimize reading data from Nbuf TLV.
4) Peer_id fix for MLO clients with security
Change-Id: I1c9e6e767bbf6565567d998ae8e1357398de5803
CRs-Fixed: 3486304
For both Unified Bonding and Non bonding mld mode,
add Support to get VDEV Stats for MLD Interface on
STA mode for ifconfig and wifitelemetry tool.
Change-Id: Icb528d8738fd932d3f2c057af49fc7af141299e9
CRs-Fixed: 3502731
1. Adding cmn dev APIs to support FSE block rule add from
ECM for SFE UL flows
2. Send SFE flows to stack post FSE match
Change-Id: I37563592a03e28373ef3e2520a771082c629ccf5
CRs-Fixed: 3499382
Logs without meaningful message or values serves no purpose in debugging.
Hence, add more context to the logs.
Change-Id: Ia463d239a9bf26f292a11bcc71cb1379374c45e4
CRs-Fixed: 3492593
With Single Netdev Unified and Hybrid Mode,
the calculation of vdev stats is changed as
per the mode. For LI platforms the path
to get vdev stats is still same while for
BE the vdev stats config path is different.
Introduced Arch ops to handle this diversion.
Change-Id: If4f0f49e78d35126942cd3f1872a5856e4d0f5ba
CRs-Fixed: 3482567
Add vdev stats support for DP MLO Unified
and Hybrid Mode.
Add new CDP API for getting vdev stats for
NON_MLD interface.
Add support to get vdev stats for specific
vdev which is a part of MLO.
Change-Id: I72c8b25958649d473e1b65cee21810cd86951187
CRs-Fixed: 3455607
In extap mode if the received packet matches with mld mac address drop it.
for non IP packets conversion might not be possible,
due to that MEC entry will not be updated, resulting loopback.
Change-Id: Ibec080b619e9b0a8068e1c90acbcc144d44d8f54
CRs-Fixed: 3485362
Currently QCA_MONITOR_2_0_SUPPORT macro is used for both TX and RX 2.0.
but on MCC side, only RX 1.0 is supported and as part of this feature
TX 2.0 need to be supported.
Enabling QCA_MONITOR_2_0_SUPPORT will enable both RX 2.0 and TX 2.0, but
to support RX 1.0 and TX 2.0, we need to separate out code under
QCA_MONITOR_2_0_SUPPORT to TX and RX 2.0 macro.
As part of this change, introduce separate macros for TX 2.0 and RX 2.0
and move the common code under both macros.
Change-Id: I7ef7e488800934291538a0bca9acd21e28901214
CRs-Fixed: 3415740
-Support to route IGMP packet to correct netdev coming from
legacy and mld sta.
-Support to detect mld model based on ini setting
Change-Id: I10ea5af9a4315642b262c8404d7bebd88ee06ab1
CRs-Fixed: 3467808
Make sure the Umac reset state is updated when
the trigger is received only after checking
Umac reset in progress flag.
Change-Id: I2c6ac68bee5b69b1f083a109646cb6bf61d8cdd6
CRs-Fixed: 3487388
As ppe_ds is not supported on QCA5332 platform, in
case of MLO peer always setup ppe peer using primary
peer
Change-Id: Icd05b69c07c05fe2fc793f49fcf28b5d58bc8bb6
CRs-Fixed: 3480359
handling multicast packets in the case of proxy arp
along with MLO MCAST.
1. stamp the host inspected bit for GSN based packets.
2. trigger dp_tx_proxy_arp from the reinject handler.
Change-Id: I8aea1e4fd4e61f4cc6a5dd6d8b5151c1a9bf2fac
CRs-Fixed: 3465975
Free the tx descriptors borrowed by direct switch
back to regulartx desc pools.
Change-Id: I2898e57ce5eff54c1787dbebd166482d9fbfc585
CRs-Fixed: 3444334
In extap mode if the received packet matches with mld mac address drop it.
for non IP packets conversion might not be possible,
due to that MEC entry will not be updated, resulting loopback.
Change-Id: I382cb2d525caa8bc23dc6bbadd0575e579645659
CRs-Fixed: 3470318
Set the Umac reset trigger action after checking if
Umac reset is already in progress.
Change-Id: Ifb4d9523d9f746eef657ef81e934ffe5c2800a6f
CRs-Fixed: 3472090
In WBM2SW Rx Error path for BE
specific functionality
1) HAL API's/Function pointers are replaced
with specific function calls.
2) Efficient read/write of WBM Error Info
from HAL Rx desc.
3) Minimize reading data from Nbuf TLV.
4) Peer_id fix for MLO clients with security
Change-Id: I760694073a06c1829f28e7e92cd1657560d8eb06
CRs-Fixed: 3472220
MC/BC frames are routed to FW ring based on routing config for MC/BC
data as SRC: FW2RXDMA and DST: RXDMA2DFW.
Data offload features in FW will take care of routing the MC/BC frames
to FW in both active and low power modes.
Make this change only for kiwi/peach using hal ops.
Change-Id: Id8665261a512c9db3e808f95082ff82b47f01ade
CRs-Fixed: 3464036
With the convergence of SCS and SAWF, do not override the TID
for legacy SCS case. Retain the value obtained using DSCP in
this case.
CRs-Fixed: 3460620
Change-Id: I19502d09f5f37376bac08eb05fcf770c71331e1c
As we are using index_look_up_overwrite field in TX
descriptor with WDS_EXT need to reset this field in
FAST TX API even in AP mode
Change-Id: I6027a2d99be715973af5f8091755f0a4a9256010
CRs-Fixed: 3450922
Fix intraBSS MCAST traffic issue between legacy and MLO
clients. Fix includes below changes
1. Change get_mcast_primary_vdev to return correct value
in case current VDEV is mcast primary
2. Avoid checking vdev->mlo_dev as it is set only for
mcast primary VDEV
3. In intraBSS ucast case use destination SOC to get the
destination peer with da_peer_id
Change-Id: I0d7a890bc62f703cd92e7c9edc20768a9a487d06
CRs-Fixed: 3456458
In WBM2SW Rx Error path for BE
specific functionality
1) HAL API's/Function pointers are replaced
with specific function calls.
2) Efficient read/write of WBM Error Info
from HAL Rx desc.
3) Minimize reading data from Nbuf TLV.
Change-Id: Ic8793ffcbeb2411c9b81fb32acae062e8a1f40cc
CRs-Fixed: 3362828
Add DP API to evaluate if TX ILP needs to be enabled,
it is only enabled if following two conditions are met,
(1) INI for TX ILP is enabled
(2) htt msdu index to qtype mapping table index 3 value is
HTT_MSDU_QTYPE_LATENCY_TOLERANT
Change-Id: I4d0c1103941b8b12b8441762dc6b45d28ee1df21
CRs-Fixed: 3447096
ppe2tcl and Umac reset interrupts need dedicated irq lines.
Hence, group some of the existing dp groups togeather
to share MSI lines to make space for ppe2tcl and Umac reset
dedicated irqs.
Change-Id: I5181caeaeb4d0107b62e7ac812c2f829fd8215a2
CRs-Fixed: 3423553
MC/BC frames are routed to FW ring based on routing config for MC/BC
data as SRC: FW2RXDMA and DST: RXDMA2DFW.
Data offload features in FW will take care of routing the MC/BC frames
to FW in both active and low power modes.
Change-Id: I09395978f890d9a23564bef4f974971f6de175df
CRs-Fixed: 3427204
Add support to send RX stats when Direct switch is
enabled. For WDS extended mode get the stats from
peer object, else take it from vdev object. These will
be accumulated by PPEDS module
Change-Id: I1f73c50679c416536cfc1ebaaeaec9b307e8bf56
CRs-Fixed: 3421251
done the following changes to improve the RX path KPI
1. remove the extra invalidate in RX path as
we no longer dirty the RX TLV cache lines.
we now store the rx error codes in nbuf cb instead
of RX TLVs reserved memory bytes.
2. with features like flow tag and wds extended mode
enabled by default, the rx_fast_flag is always set
to false, this resulted in lot more instructions
being executed in RX path.
Now we ensured this flag is at least set for other
features which are not enabled by default.
Change-Id: I04c6bdc52a2b3f1248b822a108d8bd1a70abcc7c
CRs-Fixed: 3406505
Currently dp_soc_init/deinit API's are called first for
common soc initialization/deinitialization and then architecture
level init/deinit APIs are called from base dp_soc_init/deinit.
But with RHINE architecture dp_soc_init/deinit API's are not common,
so we cannot call these APIs as base. To handle this scenario
routing all the soc level init/deinit from arch ops APIs and
arch ops APIs will take care of calling common soc_init/deinit.
Change-Id: Ibb10d452931630c917088b4d222c7fbd82621f6a
CRs-Fixed: 3404205
Remove wapi frames from is_eapol check in dp_rx_null_q_desc.
This change is to address the below issue:
First wapi packet received in dp_rx_nll_q_desc,
before TID setup does not reach stack since it is
treated as an eapol frame and gets dropped in
dp_rx_eapol_deliver_to_stack.
Change-Id: Ibcad786eb1a1cec1c082ec630ea38cc582627dfa
CRs-Fixed: 3413689
Remove DP_MLO_LINK_STATS_SUPPORT macro from per
packet RX Path to enable Link Peer Stats support
Change-Id: Ie4b7ac70db3ba3a8cc20a53de320c0eb1720d08b
CRs-Fixed: 3443161
