Add new APIs to set/reset power mode along with
island config before afe_port_start.
Change-Id: Ibd9487b04b691be5ab829cfa32c89953838f3192
Signed-off-by: Kunlei Zhang <kunleiz@codeaurora.org>
Use EOS V2 to avoid time out for EOS when afe port
is closed before EOS
Change-Id: I3be0aa33384d2015354b8f9a307f3e0cb200c040
Signed-off-by: Satish Babu Patakokila <sbpata@codeaurora.org>
Add change to support BE DAI link based on proxy
ports.
Change-Id: Id7ca274e330f025ac015567de86403fb14781cd0
Signed-off-by: Saurav Kumar <sauravk@codeaurora.org>
Add variable bit rate mode support for aac codec.
Change-Id: Iedd9fe0df2d3a12e3d4e6c2916305399da10873f
Signed-off-by: Manisha Agarwal <maniagar@codeaurora.org>
QCS405 can group data lines of several MI2S interfaces.
This feature is used with new META MI2S ports.
Change-Id: I0d8c2de742e04d7348e40e1026b1640c3f987479
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Direction of Arrival param ids are modified in ADSP Fluence Version9
as currently used params overlap with CVD range values.
Update DOA param id values to avoid mismatch.
Change-Id: I70c779c5a7fc3da3ccdf3ddcd988a20a4908ca81
Signed-off-by: Chaithanya Krishna Bacharaju <chaithan@codeaurora.org>
In a stream we need to add support for downmixed stereo channel
along with the left and right channels. Add custom channel map
to support downmixed stereo channels.
Change-Id: Icb7fa226a6f07ee4f7d00b8f55fe578c27719c86
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Add support to switch tws channel mode for aptx adaptive
encoder.
Change-Id: Ife4170be56b152d34758a1cfd20fa4ec203742db
Signed-off-by: Zhou Song <zhous@codeaurora.org>
Add interface for userspace to control FFECNS effect.
Change-Id: I78010899e6c193726a79d74e86f13a1546106eff
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
Configuration added to support stereo DSD over PCM
for csra66x0 codec via I2S interface.
Change-Id: Ibed333e44961a9eb87ef69bfb1e302f5837357d9
Signed-off-by: Romed Schur <rschur@codeaurora.org>
Extend the encoder configuration to support aptx
adaptive R2.
Change-Id: I17d7adb62539d9f59222fd0c992424ba98395383
Signed-off-by: Zhou Song <zhous@codeaurora.org>
Add MI2S/TDM AFE senary port IDs for Kona target.
Change-Id: I8dafa4516c31040aad0bca30cfdc9acbdf460bf1
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add check for mfc channel count before issuing mfc
media format command.
Change-Id: I0541d6651ecfcc90562ec0d9a632d039e34658cf
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
Add mixer control to configure multi channel map for
each backend separately.
Change-Id: Ie114fa38ee5ce47841cda4cd7f31349905f5c2c7
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Add support for speech codec which is similar to a2dp aptx adaptive.
Change-Id: Ibfbcf086f009fdb561e26aaf92cefc92f1bd16ca
Signed-off-by: Zhou Song <zhous@codeaurora.org>
Support group tdm multi lane configuration for TDM interface.
With valid lane mask tdm interface support delivery audio channels
through different data lines.
Change-Id: I63e8ba1106b89c6bcaca0a8359a1def696c334ad
Signed-off-by: Cong Tang <congt@codeaurora.org>
Implement get param for AFE_PARAM_ID_SP_RX_TMAX_XMAX_LOGGING
in order to get excursion params from DSP.
Change-Id: I5129938c51c6f6ede9d4703d13be60d04d26f5e3
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
With speaker protection in v-validation mode, speaker
samples can be tested in early factory mode. Add
support for v-validation feature from driver.
Change-Id: I92493d6d2784cf4dd58021746bffe01180f89d23
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support to process ec at channel count other than the
playback channel count by providing ability to set downmixed
channel count and downmixing weights to be used to downmix
ec ref data obtained from playback path.
These configs would be used to explicitly configure MFC module
present in ec ref path, for usecases where ec processing cannot
be done at playback channel count due to algorithmic or resource
limitations.
Change-Id: Iaa80a0f0da3697c55751b2201578252d6466d3b5
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
Handle media format update events from ADSP in case of DSP loopback.
Change-Id: I4004759cc77a05f46106d359417f97f0326af19d
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Allow to mark entries in a channel map as unused to prevent mixing other
channels in that slot.
Change-Id: I06f7de932dec4d30b2d6cfe04460d07ddad89049
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Add support for Aptx Adaptive decoder. Introduce flag
to indicate ABR feedback decoder configuration to
differentiate from regular decoder configuration.
Change-Id: I272e0a9572a56e878f7ad1385514b3be7010145a
Signed-off-by: Chaithanya Krishna Bacharaju <chaithan@codeaurora.org>
FLUENCE_EF module in COPreP topology doesn't support
44.1Khz sample rate. Set sample rate to 16Khz for
VPM_TX_DM_FLUENCE_EF_COPP_TOPOLOGY, which contains
FLUENCE_EF module.
Change-Id: I527da1a70cacba1014b2a706216172d12066b909
Signed-off-by: kunleiz <kunleiz@codeaurora.org>
VA macro in Kona has three DMA TX ports. Add a new VA
DMA TX CPU DAI in the DSP DAI driver to use it on Kona.
Change-Id: Ic144dbed1bd63af6f0150f854fdb74d57e156839
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
BT sink devices have a limitation on the packet sizes
they can receive and handle from BT sources. AAC encoder
can produce output frames which can vary in size based on
content being encoded. If frame size exceeds MTU size of
BT sink device, it will lead to incorrect decoding of
frames in BT sink.
Add a frame configuration parameter (MTU/Peak bitrate)
for AAC encoder to solve this problem.
Change-Id: Ia7795049e982400b0b3657b0b3a8990fc6920e38
Signed-off-by: Aniket Kumar Lata <alata@codeaurora.org>
Add support to get DOA tracking monitor data.
This is required to support SVA LED display feature with
FFECNS/FFNS enabled.
Change-Id: I7e39c2f3998fcc3f9ed0767c0090f862e1ba7539
Signed-off-by: Chaithanya Krishna Bacharaju <chaithan@codeaurora.org>
Add dai driver and routing driver changes for
afe loopback BE. This BE is used to capture
EC reference data.
Change-Id: Ia57f335bde5f8a47de0030fbf1cdb784c8821e17
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Add support to enable mono mode when one TWS+ earbud is
connected. Change the encoder config when device switches from two
earbuds to single earbud.
CRs-Fixed: 2341876
Change-Id: I880aa6a2767d88e99be2d80afff0e5fbec94b8a4
Signed-off-by: Manisha Agarwal <maniagar@codeaurora.org>
