At present, DP_STATS_XXX and DP_HIST_XXX can be disabled
or enabled at the same time using macro DISABLE_DP_STATS.
Make DP_STATS_XXX and DP_HIST_XXX under different macro
so that both can be enabled/disabled separately.
HIST_STATS are by default disabled and can be enabled by
enabling ENABLE_DP_HIST_STATS macro.
Change-Id: I4e7b817afef040407a496e268f2fd680791fc47b
CRs-fixed: 2449710
1. Reduce trace level of stats from fatal to info_high
2. Move stats APIs to dp_stats.c
Change-Id: I0b27a254075610fbbafcc8b09b72403ccb83473a
CRs-Fixed: 2446189
Count of MSDUs Tx with AMPDU aggregation and
MSDUs without AMPDU aggregation is maintained. This
count is obtained from per ppdu stats.
Change-Id: I7c38846534bbe5f2fd0a9b3602a9d453e1c1f449
Do not print rate statistics on the console or kernel logs. Excessive
logging in kernel messages can lead to kernel panic.
Change DP_PRINT_STATS to not print in kernel logs.
Note that this is an interim solution. Ideally these prints from DP
module should be QDF_TRACE_LEVEL_DEBUG and logged to QXDM. Currently
DEBUG trace level is disabled for DP module.
Change-Id: I54af98eda0dd4ea53ae20f25ced6b03287d8b4e4
CRs-Fixed: 2414635
For low mem config, use user configured max tx descriptors to limit the
allocation of software tx descriptors.
Use dp_txrx_pflow_update_pdev_params function to print stats and to update
pdev param.
Change-Id: I8fa6f0bb8841de68e8dc205ffcb0fde264f1b0e0
CRs-Fixed: 2414452
Delay counters per TID have been implemented for following types:
1. Linux stack to hw enqueue delay
2. HW enqueue delay to tx completion delay
3. TX interframe delay
4. RX interframe delay
5. RX frame delay from ring reap to networking stack
Change-Id: I836596cbd878a43955c18b4981cb5b7b43d4df5e
dp_soc_reinit is a flag to check if the
Rx descriptor memory can be reused across
WiFi up/down
Provide an API which checks the flag and
returns either true or false based on the
value set
CRs-Fixed: 2354186
Change-Id: I8c1afbfe0f743d7c9ab37a42a9ef0c6ac1fbf39c
The last_ack_rssi value is made to get updated with the
correct value and the code fragment to reset it to 0 has
been removed.
Change-Id: I87f9ca788c92ae6ffc05b10faeb82e03024050ce
Maintain SG/TSO desc_cnt at pdev stats instead of ingress
stats to support legacy stats and change the fw_rem counter
to cdp_pkt_info to have packets and bytes information
for legacy platforms as part of convergence effort.
Change-Id: Ib908e8d1c1d78d191418d3884f41f981ba002b54
MultiVap if no sta associated or monitor mode,
data packets do not carry any rx rssi
or rate values while aggregating pdev or vdev stats.
Do not update for vap in if rx rssi or
rx rate value is zero.
Do not attach monitor vdev to vdev list
Change-Id: Ie64a05d795660d557d928cb9b874fa5e702f4f55
As multicast is supreset for mcast and bcast,
derive pdev unicast stats only from to_stack and multicast.
Change-Id: I207e1e1d1950b52e0758aac539c79c1865192371
CRs-Fixed: 2323824
Currently peer reference is used with out taking any ref count.
In parallel context execution on different core peer reference may
be cleaned up in peer unmap event. So take ref count while using
the peer reference and decrement after done with it.
Change-Id: I02ca172cbdc4309fabd3bbbad00940826662bbd3
CRs-Fixed: 2301963
Currently aggregate vdev/pdev is missing Rx nawds mcast drop
counter, add nawds mcast drop counter from peer
Change-Id: I10650639bf5c56410c0f5311090c8a544df89d5d
1) This reverts commit
I7025fdd7540f47bb4d3f95ef6d9f2ef92af5f1f1
2) Reverted changes have been taken care through:
Idd7617782e71ee187eef7fcb3523c05b49f82094
CRs-Fixed: 2300055
Change-Id: Icc47ded9a585e356b7eae1ad53ffea6668510308
Upon receiving 2k jump exception, send delba
and track delba tx status and retries.
Change-Id: Ida35256233869dfa390c40030c9296b9c48481ce
Crs-fixed: 2239856
Add change for disconnected peer stats ,
will remove from bss_peer
and will store in vdev, bss peer will have only multicast
stats for connected and disconnected peer.
Change-Id: Id294d1f3218dbfabcc252bac04f1a3e5f543a247
CRs-Fixed: 2290723
Currently aggregate vdev/pdev is missing nawds mcast drop
counter, add nawds mcast drop counter from peer
Change-Id: If1e2296c30cfcb5689449c8e23317282e5dce1c6
Move the state to in_progress when we process addba
request and upon tx comletion of addba response, move
the state to active. Any addba request received during
in_progress is ignored and reo queue is updated with
window size 1 and set to inactive.
Change-Id: I69cfbc162d873f9e6842ca3e7971146dafba2695
Crs-fixed: 2188927
Add cdp ops for timestamp setter/getter function for peer based on
mac address.
Change-Id: I7025fdd7540f47bb4d3f95ef6d9f2ef92af5f1f1
CRs-Fixed: 2275985
Remove pre processor directives for platform specific
dp peer functions and have stubs for them.
Change-Id: Ibdb9114918bbec86cc4be411f730da5777204226
CRs-Fixed: 2262603
1. Add CDP API to set encryption key in datapath.
Used to perform RX TKIP demic.
2. Fixes to RX TKIP demic function.
Change-Id: Ia14caeb71a320b4746f4303cf6611f1b6e4947ae
CRs-Fixed: 2214749
Address the following issues in the dp folder:
CHECK: 'availble' may be misspelled - perhaps 'available'?
CHECK: 'catagory' may be misspelled - perhaps 'category'?
CHECK: 'endianess' may be misspelled - perhaps 'endianness'?
CHECK: 'exceded' may be misspelled - perhaps 'exceeded'?
CHECK: 'explicitely' may be misspelled - perhaps 'explicitly'?
CHECK: 'Inteface' may be misspelled - perhaps 'Interface'?
CHECK: 'lengh' may be misspelled - perhaps 'length'?
CHECK: 'messsages' may be misspelled - perhaps 'messages'?
CHECK: 'miscelleneous' may be misspelled - perhaps 'miscellaneous'?
CHECK: 'Ouput' may be misspelled - perhaps 'Output'?
CHECK: 'poiter' may be misspelled - perhaps 'pointer'?
CHECK: 'Poiter' may be misspelled - perhaps 'Pointer'?
CHECK: 'psuedo' may be misspelled - perhaps 'pseudo'?
CHECK: 'registerd' may be misspelled - perhaps 'registered'?
CHECK: 'requred' may be misspelled - perhaps 'required'?
CHECK: 'retreive' may be misspelled - perhaps 'retrieve'?
CHECK: 'succesfully' may be misspelled - perhaps 'successfully'?
CHECK: 'vaild' may be misspelled - perhaps 'valid'?
CHECK: 'virtaul' may be misspelled - perhaps 'virtual'?
Change-Id: I66b9cdc6115dd133b385e60c9d02cefd1bd0bac3
CRs-Fixed: 2241574
In VHT case, for some packets SGI value is 3, which
represent 3.2us value. Which is not applicable for VHT.
So if value 3 received from HW for SGI, than convert that
to default value, which is 0.4us.
Change-Id: I92716f8041f0db20b60dcd5e5d6681fa1bfa708f
Set pdev mask in the HTT Stats request based on
mac id number provided from the user.
Change-Id: Ie8f1208fd3598efd2ea3736719c8b444ef86881a
CRs-Fixed: 2237467
Update function prototype of dp_ppdu_stats_ind_handler. It should be
same when WDI_EVENT_ENABLE is defined and not defined.
Change-Id: I390d35b3b9f5f283fc3b960f00563fb997ef7f95
CRs-Fixed: 2230955
Add option to ignore vdev_id match to peer hash lookup API
when vdev_id is passed as 0xff to the API, it ignores vdev_id
argument
This option is needed for usecases like peer level statistics
display where only MAC address is known and vdev_id is not known
Also add the missing accounting of rx broadcast frames in the
overall statistics
Change-Id: I9939ac8bf30f6be3d216f9aa28d52560bf445e06
If peer with given MAC Address
already exists, just increment the refcnt
instead of allocating a new peer and deleting older
peer object. This avoids unnecessary memory fragmentation.
Change-Id: I76a3ffca4e907fccfdfd1b6857de721623f455d5
CRs-Fixed: 2209045
peer rssi and rx rate stats counters aggregated
to vdev/pdev level so that athstats shows proper values
Change-Id: I4d4a28006c30b1f2eba77bbeaddb9723626166db
Stats counters for BW were not printed correctly due to difference in
mapping of BW on host and FW.
Also added Tx NSS stats during aggregate vdev stats
Change-Id: I348a5f9f974544ffe17ba403cd64769eff05c9b5
CRs-Fixed: 2203582
Initialize MAC1 along with MAC0. 2.4GHz monitor mode operates on
MAC1 so initialize MAC1 and reap both MAC0 and MAC1.
Change-Id: Id281def37d460b224f5f571893266f193846fd0c
CRs-Fixed: 2176848
Add htt tx and rx structs from HTT to cdp_pdev_stats.
These Fw tx and rx stats are obtained through HTT events.
athstats application uses cdp_pdev_stats that contains host stats
and fw stats.
Change-Id: Ia063f406bdc6d32a684c4026b8425ecc96faa3db
CRs-Fixed: 2190793
Tx completion success counters are not being updated correctly.
Accumulate successful completions in tx_success variable.
Change-Id: I290e581e93e03ad23e349c9df7834174d6d3a787
CRs-Fixed: 2191599
Inactivity timer initialization is moved from dp
attach to soc attach as the timer is being
initialized multiple times in case of multiple
radios
Change-Id: I85d1d8710ccc7531c43ec82378c3ca0b65d26cf9
Addba recieve/response logic has been implemented in
host for HE instead of in FW like VHT. setaddbaresp
is not hooked to the dp module yet to set the addba
response from userspace. Implement the required logic
for HE to support this command.
Change-Id: I49cceca299db06d41f2cafa690f5ba59e01f1f4a
CRs-fixed: 2163475
vdev stats are getting reset to zero when a peer disassoc
with the AP. the fix is basically update peer stats to
bss_peer just before we delete the peer.
Change-Id: Ibada4ab82fbb68f32df89bdbae8b172bc8973fe7
