Enable FEATURE_WLAN_DOWOW for pcie.
This is for backward compatible with rome fw.
Change-Id: I41b9628179e81da682e6c6a9100d08ba7268f1a0
CRs-Fixed: 2070433
Request and process Beacon frames from FW using WMI command and event.
WMI_HOST_REQUEST_BCN_STAT is for beacon stats request and event processing.
Change-Id: I99250384868d62089a0f7d2acf94dd6e29ef67b9
CRs-Fixed: 2139393
Beacon offload control WMI command is used to control beacon tx in
beacon offload enabled mode. Add WMI API to send this command to FW.
Change-Id: I8b340b69ff508aaf80b9a80de044b0189b947a66
CRs-Fixed: 2140255
WMI ready event provides num_dscp_tid, num_total_peers and other
information that is used. Add API to extract these params.
Change-Id: I85ffc43f20935d84de133591020468c5e5f102de
CRs-Fixed: 2141667
Add support for configuring aggregate size for A-MSDU and A-MPDU
aggregations.
Add support for rate dropdown vdev param to dropdown rates for SU, MU
and MGMT packets.
Change-Id: I033693e1c21c05d06acd7df36eac580be19fe20b
CRs-Fixed: 2138655
Acked-by: Aditya Sathish <asathish@qti.qualcomm.com>
Firmware sends beacon/probe response, reassoc request and
reassoc response using new event WMI_ROAM_SYNCH_FRAME_EVENTID
when the data that it wants to send via WMI_ROAM_SYNCH_EVENTID
exceeds max length 2k in firmware. Add common changes to handle
WMI_ROAM_SYNCH_FRAME_EVENTID in such a scenario.
Change-Id: I62755dfa3c2a4b0ff9ee48fd5f24cc2e300b374f
CRs-Fixed: 2122432
Currently, WMI is exposing two command ops
(send_init_cmd and init_send_cmd) for init
command purpose which is leading to data/code
redundeancy. Perform clenaup for send_init_cmd.
Change-Id: I8f31ab45392cf2afb3cc34c633ba83ea42a3a835
CRs-Fixed: 2138507
Host enables thermal throttle depending on FW capability.
Add support to read this capability from ext service ready.
Change-Id: Ifafc24deac0bac228c98750f54e95fdfa3377a6a
CRs-Fixed: 2128049
SME module propagates KeyRSC to MAC/PE module but MAC/PE doesn't
pass this counter to WMA and due to which WMA is not able pass to
WMI module.
Add a fix to propagate KeyRSC field from MAC to WMA module and
WMA to WMI module.
CRs-Fixed: 2130765
Change-Id: I0de6907bf8aa159eccb1d8310e7027f8fdf19fff
Add support for sending periodic chan stats config command to target. Once
configured, host will receive the channel stats periodically as per the
configured period
Change-Id: Ic2b4692d0e2662ca590b925732f6cb33aac7a6de
CRs-Fixed: 2136759
RCPI is measure of received RF power in the selected channel for a
received frame and is measured at the antenna connector and shall be
measured over an entire frame. It is a monotonically increasing,
logarithmic function of received power level.
Wlan firmware computes RCPI.
Add host support to query firmware for RCPI information of
peer mac address in sta, p2p client, softap and p2p go modes.
Change-Id: I27fe45e993bd9b157fe33ca08a56330c1c950d16
CRs-Fixed: 1093187
Setting Gratious ARP request through iwpriv command is
not supported.
Add condition to set Gratious ARP request as method in
Keep Alive functionality
CRs-Fixed: 1114602
Change-Id: I299d39131e7ab0ebae6bd10f41bc4549debda048
It is required to send vdev-param HEOP to the target with
updated bss-color to enable HE BSS Color feature. Add
necessary code to support this.
Change-Id: I826bc5387dad8d044abcbc9cbdf69e93b59beb39
CRs-fixed: 2126605
fw_abi_version is used in WMI to check compatabilty of host and target
WMI interface. Cleanup handling to fw_abi_version.
Change-Id: Ia78c4683b9eff06d3c052df3921c024962abd828
CRs-Fixed: 2131311
Log the necessary debug information before freeing the dynamically
allocated memory while sending WMI commands
WMI_ROAM_CONFIGURE_MAWC_CMDID and WMI_NLO_CONFIGURE_MAWC_CMDID.
Change-Id: I10c8a96f8bb1a6cb661501f9ae9b9b21560980de
CRs-Fixed: 2094763
Currently, driver sends add/delete pmksa entry to fw
whenever supplicant sends set/delete pmksa to driver.
Add support to flush all PMKSA entries as well.
Change-Id: Iace843cdf26bf06f3e70703f87c082997a78b894
CRs-Fixed: 2094234
Both the unified DHCP offload struct dhcp_offload_info_params and all
of the function prototypes use "camelCase" which is frowned upon by
the Linux Coding Style. Replace the camelCase.
Change-Id: I3f2ce74bc150668b96b1946ef7b2d556c23dad94
CRs-Fixed: 2121485
Add cmn support for the following:
- Update ERP info in RSO Start
- Update HLP info in a new command WMI_PDEV_UPDATE_FILS_HLP_PKT_CMDID
- Set/Delete PMK cache info with WMI_PDEV_UPDATE_PMK_CACHE_CMDID
- Process FILS TLV in Roam Synch Indication and update the FILS info
[seq number,PMK, KEK, realm] to Supplicant.
Change-Id: I239bf5d6c4455d39181e335dbf73bcade16aee8e
CRs-Fixed: 2089128
FW reports build number in service ready and ext_service ready event.
Save these to display FW build version during brinup.
Change-Id: Ia86a392f826c5bb836be9353e3938ab1f811ab62
CRs-Fixed: 2125667
Adds support to dump dfs pulse information from firmware to host
for debug purpose.
Change-Id: I3b2042f8df6e077eed1a3847cd2d8550794bc6f7
CRs-fixed: 2121833
Add support to send BSS scoring params from INI to firmware.
Firmware will use these params to select best candidate during
roaming.
Change-Id: Iad0e71c770ac4f4c31ce3b19552f09fd27dc37bf
CRs-Fixed: 2121739
Currently, we do not have support for 'he_ltf' command. But we need
this command for certain IOP testcases. Add support for 'he_ltf'
command.
Change-Id: I296b18762aaa52da80a5755c5bcca8dbd12d9b13
CRs-fixed: 2118948
qcacld-2.0 to qca-wifi-host-cmn propagation
If no SSID are passed to NL80211_CMD_START_SCHED_SCAN cmd,
interface spec requires that an active scan is not needed.
Therefore a passive scan is now requested by cfg80211_sched_scan_request
for this case.
Change-Id: I1b1b9232ffb9d8d5c0bc9a1d75145d39c9fe9e6b
CRs-Fixed: 902092
Initialize pdev_id for PDEV stats request and response event.
Add param to set pdev stats request timer.
Change-Id: I11f648070cd39f026129d1cf3aa13bf296d25e6e
During host invoked roaming, set
WMI_ROAM_INVOKE_FLAG_NO_NULL_FRAME_TO_AP
flag so that FW will not send NULL data frame while doing transition.
CRs-Fixed: 2046964
Change-Id: I043c3d2431e4da5af36fb710bd36a520550abbd3
Populate tx frame count and mac clock frequency to the
wmi channel info event object.
CRs-Fixed: 2114541
Change-Id: I6180e377d576409705e57d7aa9172141965f79ad
Currently LCA Disallow (Last Connected AP) bitmap is hardcoded
to be enabled only for PER roam scan.
Add Background Roam Scan also to the LCA Disallow bitmap set from
host to fw.
Change-Id: I4878350ef772f168ba909fd8b30cf2aa31f68fcc
CRs-Fixed: 2109974
Extended service bitmap is used by FW to indicate supported services
bitmap for services excedding the current limitation of 128. Add support
to save and use this bitmap to check services supported in FW. Also,
change exisiting services bitmap to be dynamic allocated buffer to
optimize the buffer used to save the bitmap.
Change-Id: I24a0321bc1a06ee3aedf1c6acbc379e907bbd464
CRs-Fixed: 2103617
Add new Bad RSSI threshold offset for 2G to 5G roam and flags
to roam_offload_scan_rssi_params and fill them in the WMI cmd TLV
to pass it to the firmware.
Change-Id: I78876f5104e67280b1342ec0957d0162edbaf502
CRs-Fixed: 2105894
Fill the roaming parameters wmi_roam_bg_scan_roaming_param and
send them to firmware to be consumed for the background roaming
at bad RSSI
Change-Id: I08786141d28f8459aad27aaf53816ec4cdec7f08
CRs-Fixed: 2082906
Add support to fetch min and max tx power from target for
a given set of mcs, nss, chainmask, bw, and other rate flags.
Change-Id: Iafe082db81503a52bdc704d4b71d86d23788fddb
CRs-Fixed: 2061802
qcacld-2.0 to qcacmn propagation
Add changes to support PNO scan in connected state to find better Ap's
based on rssi threshold, band and rssi preference.
Change-Id: I0744297cc5269f0fe37613247c911102e293d8e9
CRs-Fixed: 2000342
For DBDC/DBS cases, each radio will have a separate MAC
address. FW will provide the list to host in ready
event. Handler has been added to extract the list.
Change-Id: I6da96ae02a1f30995e3953358677090b84fc57c4
Few pdev params are populated as unavailable param in the TLV layer.
Some of them are now enabled by the target. Populate the right pdev
param enum as per the definition in the converged WMI header.
Change-Id: Ia06498da9023f53035abde31c3aef2749f6b65b9
CRs-Fixed: 1115239
Add timestamp parameter in scan event received from FW to aid
in calculating dwell time and overall channel switch time in
off-channel operations.
Enable foreign channel exit event inorder to be notified
by FW through the scan event.
Change-Id: I4ba028756ee7db35f6528c0554b09c73087184a7
CRs-Fixed: 2056330
Add required WMI commands to communicate support of
EXT NSS Signaling between host and FW. Also, if
EXT NSS Signaling is supported the use new WMI to
communicate the required information between host and FW.
Change-Id: If3e1ef11a55f8fbdffddb3b10963878a6a2ca415
CRs-Fixed: 2089043
Currently only action category is specified to be dropped/allowed
by fw. Add support for action id bitmask per category.
Change-Id: I208af7827532740104afbb3d0e9b8dda3a8b2d47
CRs-Fixed: 2072125
