Add DP API to evaluate if TX ILP needs to be enabled,
it is only enabled if following two conditions are met,
(1) INI for TX ILP is enabled
(2) htt msdu index to qtype mapping table index 3 value is
HTT_MSDU_QTYPE_LATENCY_TOLERANT
Change-Id: I4d0c1103941b8b12b8441762dc6b45d28ee1df21
CRs-Fixed: 3447096
Arrays are not initialize and due to which
elements in array might be used uninitialized.
To avoid this case, arrays are initialized to NULL.
Change-Id: Ib83c8f512369f877b9c39d9e6eb431e9bdca7ad9
CRs-Fixed: 3449024
With pcie 1 and pcie slot 2, if ipa updates the 40th bit then
access to pcie memory region is going in pcie_0 memory region.
IPA is not allowed to update 40th bit for any address given
from pcie_1 and pcie_2 memory region.
Fix is do not send the pcie update status as true to IPA for DB address,
so that IPA will take long path of mapping the address in smmu context and
then it will access the pcie region.
Change-Id: Ieeaf1262cef927ca89cded3714c6e37550b8f197
CRs-Fixed: 3448895
FW sends ppdu_id for every TLV in Tx HTT PPDU completion path.
This ppdu_id has 8 MSB bits filled with FW metadata which is different
for every TLV. Host uses this ppdu_id for list maintenance.
Presence of the FW metadata results in ppdu_id mismatch for different
TLVs even when they belong to the same PPDU.
Consider only LSB 24 bits for ppdu_id on host side.
Change-Id: Ic6ec780fe97f0597fcd841b33ac0dce33ad986c9
CRs-Fixed: 3445603
CUrrently if IPA offload is enabled in SAP mode
the default Rx routing is to IPA serviced REO rings.
With this change the default raouting is set to
WLAN HOST serviced REO rings.
Change-Id: Ibf9dead063c9d9fbc6b1fd502342ea13456b2473
CRs-Fixed: 3421879
Move fail_cnt and abort_count to soc->stats
struct, so that we can retrieve stats
during a crash. Also fix few other errors
found during initial tests.
Change-Id: Ieaee10b2dd2b5e589c21aa50c83dcf352623275d
CRs-Fixed: 3428501
Buffer was freed before processing the TLVs
(while flushing) leading to use after free access.
CRs-Fixed: 3425044
Change-Id: Ida3bcf9add95041c43b2b1e8e3450853bd0ed88c
IPA_OFFLOAD will be enabled by default for MSM.
This is a WAR to disable IPA offload during compile
time, based on the IPA_WDI_OPT_DPATH feature flag from IPA.
If the flag is not defined in the IPA test
module file, IPA offload path will be disabled.
This is a WAR, and will be fixed once a Kernel config is
available to enable or disable the optional wifi datapath
feature.
Change-Id: I7aad275f4d86a2ffc239f1fe343de31ec2988fad
CRs-Fixed: 3431972
If the ingress net device is NULL, return gracefully
from the API to check if the skb is from rmnet
Change-Id: I81b8cea7f311fe581e83f2310155b83b28f2fd32
CRs-Fixed: 3445050
Fix the function name dp_ipa_opt_wifi_dp_cleanup()
for IPA_OPT_WIFI_DP not defined case.
Change-Id: Ie8d7db76add281025fd654d8a3e0017eddd6fbc4
CRs-Fixed: 3446301
Inorder to keep the PCIe link up during
optional wifi dp transfer the
hif_force_wake_request() is called during
filter addition. This increments the rtpm_get counter.
Now if Wifi is disconnected before releasing the
filters, the corresponding hif_force_wake_release()
call is not made. This causes a mismatch in RTPM GET and
PUT calls and triggers an assert during hdd_wlan_stop_modules().
This change adds a cleanup call to release the force wake
and reduce the rtpm_put counter to prevent the assert.
Change-Id: Idd778275a015922376cf7eb0a7c3d92e75881fe8
CRs-Fixed: 3441186
ppe2tcl and Umac reset interrupts need dedicated irq lines.
Hence, group some of the existing dp groups togeather
to share MSI lines to make space for ppe2tcl and Umac reset
dedicated irqs.
Change-Id: I5181caeaeb4d0107b62e7ac812c2f829fd8215a2
CRs-Fixed: 3423553
MC/BC frames are routed to FW ring based on routing config for MC/BC
data as SRC: FW2RXDMA and DST: RXDMA2DFW.
Data offload features in FW will take care of routing the MC/BC frames
to FW in both active and low power modes.
Change-Id: I09395978f890d9a23564bef4f974971f6de175df
CRs-Fixed: 3427204
Reduce log level to debug from error to avoid console flooding
when low mem condition is hit.
Change-Id: I0341beed9059c4db2eba2cc481a797d67dd35b25
CRs-Fixed: 3442503
Consider 4 address repeaters also for vdev stats when operating in
WDS Extended mode.
Change-Id: I91d9bbeb2b917154da730b22b46645e76fa55c6f
CRs-Fixed: 3437803
Add support to send RX stats when Direct switch is
enabled. For WDS extended mode get the stats from
peer object, else take it from vdev object. These will
be accumulated by PPEDS module
Change-Id: I1f73c50679c416536cfc1ebaaeaec9b307e8bf56
CRs-Fixed: 3421251
Get peer_id from peer structure to a local variable and pass to hal api
in order to avoid race condition between peer delete and peer unmap.
Change-Id: Ib6a89f1defcfc8f66c1146a330a373a760520aa7
CRs-Fixed: 3444998
done the following changes to improve the RX path KPI
1. remove the extra invalidate in RX path as
we no longer dirty the RX TLV cache lines.
we now store the rx error codes in nbuf cb instead
of RX TLVs reserved memory bytes.
2. with features like flow tag and wds extended mode
enabled by default, the rx_fast_flag is always set
to false, this resulted in lot more instructions
being executed in RX path.
Now we ensured this flag is at least set for other
features which are not enabled by default.
Change-Id: I04c6bdc52a2b3f1248b822a108d8bd1a70abcc7c
CRs-Fixed: 3406505
As of now, RX PPDU START USER INFO TLV is not subscribed as
part of pktlog. Since enable_ol_stats is set by default and
it subscribes RX PPDU START USER INFO TLV, we can see
RX PPDU START USER INFO TLV being available as part of pktlog
data. But recently, with all the automation testing scripts
it is decided to set enable_ol_stats to 0, hence subscription
of RX PPDU START USER INFO TLV is taken care during the filter
set up for all the pktlog modes.
Change-Id: Ib8c7e668a17fcb8e791784d29ef6f00fbdd2df34
CRs-Fixed: 3440721
Change monitor print to debug level as this print causes flooding
and could potentially lead to CPU flooding.
Change-Id: I76cda51c9d3d0658ebd02b2112fba5310d8eb22c
CRs-Fixed: 3439802
As of today, dp_peer.c has the peer management and rx_tid
functionality(create/setup/remove) which is used by the REO HW.
WCN6450 does not have REO HW and dp_rx_tid functionality is not
required for WCN6450. Hence, separate out dp rx tid functionality
from dp_peer.c so that we can avoid compiling unnecessary code
for WCN6450.
Change-Id: I322823704f38ff72e485f050941be6b1254bad09
CRs-Fixed: 3383330
Move cfr monitor filter cdp func ptr to cdp mon ops structure.
cfr monitor filter cdp function is different for 1.0 and 2.0
hence moving the func ptr to mon ops structure ensures that
func ptr is initialized appropriately.
Change-Id: I82b9c85e96f2f219521ae6ed908ade120081c748
CRs-Fixed: 3428791
In the case of WCN6450, WBM HW block is removed in the UMAC.
TX completions come via HTT messages. Add logic to handle
HTT TX completion messages from the firmware.
Changes are specific to WCN6450 and hence implement the logic
in the arch specific code.
Change-Id: I447020354ce26e8948e4b49648c434fb2ed302cd
CRs-Fixed: 3381814
If only a single filter is installed,
then the ip version of the second filter
param will not be set. Hence fix the check
for ip version in htt layer as it is already
verified when received from the IPA layer.
Change-Id: I05dff71aa27a254023599df0cbab51bafd0c4f82
CRs-Fixed: 3441760
This code helps to initialize and deinitialize new SOFTUMAC
based Rhine architecture.
Change-Id: I374140ccb3b31e9351c6e683c77d81a5a876472a
CRs-Fixed: 3382913
Currently dp_soc_init/deinit API's are called first for
common soc initialization/deinitialization and then architecture
level init/deinit APIs are called from base dp_soc_init/deinit.
But with RHINE architecture dp_soc_init/deinit API's are not common,
so we cannot call these APIs as base. To handle this scenario
routing all the soc level init/deinit from arch ops APIs and
arch ops APIs will take care of calling common soc_init/deinit.
Change-Id: Ibb10d452931630c917088b4d222c7fbd82621f6a
CRs-Fixed: 3404205
Currently we have a 850ms timeout threshold not to
block upper APPs, but this could contribute to some
query timeout. To address this issue, this change
changes the timeout threshold from 850ms to 100ms.
Change-Id: Ibb39609000972d09713a0435b4884454b331fe4f
CRs-Fixed: 3436517
Remove wapi frames from is_eapol check in dp_rx_null_q_desc.
This change is to address the below issue:
First wapi packet received in dp_rx_nll_q_desc,
before TID setup does not reach stack since it is
treated as an eapol frame and gets dropped in
dp_rx_eapol_deliver_to_stack.
Change-Id: Ibcad786eb1a1cec1c082ec630ea38cc582627dfa
CRs-Fixed: 3413689
Remove DP_MLO_LINK_STATS_SUPPORT macro from per
packet RX Path to enable Link Peer Stats support
Change-Id: Ie4b7ac70db3ba3a8cc20a53de320c0eb1720d08b
CRs-Fixed: 3443161
in case of DS pkts the same pkt which is received
in RX path (REO2PPE) can be refilled back to wifi
rxdma
CRs-Fixed: 3381462
Change-Id: I3762c91110ffcc95162bf068b7a1ed3e41904824
Changes to allocate correct number of buffers for monitor during boot
time and allocate remaining buffers only when monitor vap is created.
Change-Id: I8a2cd7b6a20a281934c47ca0418904b426d17a4d
CRs-Fixed: 3432525
Move smart monitor cdp func ptrs to cdp mon ops structure.
Smart monitor cdp functions are different for 1.0 and 2.0
hence moving the func ptrs to mon ops structure ensures that
func ptrs are initialized appropriately.
Change-Id: Ic827b44f36d76349f397e5b72dec0a127f90aa7a
CRs-Fixed: 3428778
1) Enable MLO Link Stats Support
2) Add Stats counter to capture Invalid Link ID
3) Fix the FW Recovery crash while ol_stats
disable.
Change-Id: I1b5263ae024579c5ec2018f8082f0d03ffdf0030
CRs-Fixed: 3431319
Currently, HW cookie conversion is enabled
for the WBM ring dedicated to IPA during
optional wifi datapath feature. IPA does
not need HW cookie conversion hence disable
it for this ring when the feature is enabled.
Change-Id: I84ecfa54c87f41f1be5202280c450bdfaeebd4ac
CRs-Fixed: 3437556
With the current implementation of tlv parsing for rx_evm and
rx_antenna, there is a flood in printing the higher pilot
evm count error. Update the debug level of the print to
prevent the RCU stall due to excessive printing.
CRs-Fixed: 3435849
Change-Id: I8f1eb0c133a4d8b70494639d90b04de23b276fc2
To support MLO on 4 chips, update the maximum number of chips that
can participate in MLO to 4
CRs-Fixed: 3426681
Change-Id: I1281eed9720d5a5f17bbb6a5e3c7f9e56842a33f
As IPV6 version number 0xdd86 is 16 bit integer
change the type from uint8_t to uint16_t.
Change-Id: I82c2c0c5bac0632351ee41873b4dd83b2eeae8be
CRs-Fixed: 3429726
Refactor DP rings related code to different files, such that
both hardware UMAC based and Software UMAC based platforms
can use required code effectively.
Change-Id: Ie58eae34a2da77c2d63870fab74b9d2d9d49c14a
CRs-Fixed: 3382905
Clear the target assert seen SOC from partner_map to disengage it from
umac reset process.
Change-Id: I588ae15977b1fd989b6dccb16c5fa3a5269f5f6c
CRs-Fixed: 3433794
Add CDP api support to notify asserted soc info to DP
umac reset module, to disengage a asserted soc from
umac reset process.
Change-Id: I92ee07ed90243567dab83d0686022c8327efe1b6
CRs-Fixed: 3428265
