When SWR MIC is used, lpass-cdc doesn't know if it's amic
or dmic on WCD. Add new mixer control to indicate if
swr_dmic is used or not.
Change-Id: I2910053d1da9110edfe9b021df744f9d1662d158
Signed-off-by: Meng Wang <mengw@codeaurora.org>
retrieve clk attribute for tdm and mi2s from dtsi.
Change-Id: Ie00ac5cf7c2e1d7ca56e27d291dfd6af3feb8d8f
Signed-off-by: Prasad Kumpatla <pkumpatl@codeaurora.org>
Check if the interface index is either of TDM/MI2S/AUXPCM
to implement the common ops as the current index is valid
for other interfaces like CDC DMA as well.
Change-Id: I345a2b47185d6d56198061a17921fdfc2f5e3290
AGM might get initialized before sound card is populated
with all pcm nodes. This will lead to AGM parsing fewer
nodes and forms incomplete list of backends.
To avoid this, kernel module sets card status to ONLINE,
and AGM waits till the card status is ONLINE before parsing
for the pcm nodes.
Change-Id: I4b7f7085645706ba4351efe23ba048d3a177312c
Signed-off-by: Srinivas Marka <smarka@codeaurora.org>
BCS is not enabled sometimes after inserting headset if
plug is already reported and we dont report it again.
Enable BCS if plug type already reported.
Change-Id: I8c9f15ced66a21bda169d3479da96168ebec26a7
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
When adsp SSR happens, VA_MCLK enabled by VA_SWR_PWR widget will
not be disabled as ADSP is down and it cannot enable TX_MCLk before
disabling VA_MCLK. After disabling SVA, VA_MCLk is left open.
Add dev_up flag to indicate SSR and close VA_MCLK during SSR.
Change-Id: Ic544ce32c46054c7362d3eb07a4a47ec115d2651
Signed-off-by: Meng Wang <mengw@codeaurora.org>
add lpass hw core request before request for the
set clk cfg in the case of primary and tertiary
interface along with fractional sample rate related
clock request.
Change-Id: I273e6963ee39e350c44e5bcf35427327b7189cd1
Signed-off-by: Prasad Kumpatla <pkumpatl@codeaurora.org>
When SVA is enabled and headset is inserted and playback is started
on headset, sometimes electrical irq is triggered resulting in
headset removal being reported. This happens because of high mic
voltage being reported. Enable micbias before checking for adc
voltage to resolve issue.
Change-Id: If7445c906b2e62f12b48548a2d435db01f184587
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add null check for swr dmic component and swr_dmic_priv
before use.
Add array bounds check for slave port index before
accessing the array.
Change-Id: I6f1976e98e41e513a9a9db83d4e804a5cb1fe79b
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
Thermal framework is expected an error to be returned if the requested
cur_state exceed the max_state.
Change-Id: I1e0d8124a1aa6c0d755b35225207638aefdcb464
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
Update central broadcast register control to enable bcl path.
Change-Id: Ibc05289d9cdd41e81369c6ef2547eceffa36d73a
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
When reading/writing lpass codec registers, pm_runtime_put_autosuspend
is missed when vote fails and it causes device fails suspending after
ssr. Add pm_runtime_put_autosuspend to pair with pm_runtime_get_sync.
When LPASS_CDC_MACRO_EVT_PRE_SSR_UP comes, core vote is needed before
resetting GFMUX reg and dev_up is not set to true yet. Add pre_dev_up
flag to indicate PRE_SSR_UP and be used in lpass_cdc_check_core_votes
to avoid false alarm.
Change-Id: Ic12ecd9645f291078e32f4921f9f77c2d85e4b8c
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Incorrect check for return value of clk_div_get
causes CLK_DIV2 setting being missed. Fix the
return value check to address this.
Change-Id: Ic1b6761ab836a38c657ac7e43efda0e2f23c5fee
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
pdata return from msm_common_get_pdata may be NULL
and dereferenced.
Change-Id: Ied986d377f0fe8486c4be2c420d8d1b5f3868fd8
Signed-off-by: Prasad Kumpatla <pkumpatl@codeaurora.org>
During ssr, when powering down audio path and core vote fails,
it directly exits without disabling clock. After adsp is up,
it will enable both RX_MCLk and RX_TX_MCLK which causes
glitch on headset output.
Change-Id: I98d3cdbffa0a5ae1ac4064579a52a29b02d4ae3e
Signed-off-by: Deepali Jindal <deepjind@codeaurora.org>
BCS is not enabled for us headset as after 3sec loop
we directly switch to report headset and bcs is still disabled.
Enable bcs only after reporting valid plug to resolve issue.
Change-Id: I69bb71d20583fd2e2be921e9b657d9c44c047708
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
add support for the tdm slots configuration from dt.
Change-Id: I9fc9f81c4793c1b9eefe326af2db5259f35a2a4f
Signed-off-by: Prasad Kumpatla <pkumpatl@codeaurora.org>
SVA switch is not retain at VA_CLK when switch
between handset and headset mic sva. Update the
clock release logic during swr power event.
Change-Id: I52c5f7576426af2ff385a862da872e8d86959ecb
Signed-off-by: Meng Wang <mengw@codeaurora.org>
When requested clk is not default clk, it should not enable
VA_MCLk directly. lpass_cdc_clk_rsc_check_and_update_va_clk
will take care of VA_MCLK switch.
Change-Id: I602be7dcc0228fd2e6ecd7624a96663e89485bd0
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Observed pop noise on TDM SPK AMP in the disable sequence. To resolve
the pop noise, TDM clock should be turned OFF after digital mute ,which is done
in machine driver for the disable sequence.
Change-Id: I9c8b5ef820cd8ec1e9a7d022e1938d53e2f401a1
Signed-off-by: Prasad Kumpatla <pkumpatl@codeaurora.org>
Add ftrace log to debug NOC issues.
When writing/reading lpass codec registers, add vote_lock
to make sure clk is not disabled.
Change-Id: I1df924d6aefee2899f7e5008851c1c324dabf62a
Signed-off-by: Meng Wang <mengw@codeaurora.org>
When multi wsas are connected to wsa-macro and some registers
are written to wsa, swr broadcast mode is used. When closing
one wsa, it will also send the register write to the other wsa
and it should not get updated. The other wsa will be in bad
state.
Remove broadcast for wsa-macro to resolve this issue.
Change-Id: I4c788a213fdcd217861703a13d44c096fd9b632d
Signed-off-by: Meng Wang <mengw@codeaurora.org>
This change is to remove the group write so that both the WSA slaves are
updated with the corresponding values for DRE CTL register.
Change-Id: I1f9583ff1ca3988b78896087b2f8e7409e4796fd
Signed-off-by: Sairam Peri <peri@codeaurora.org>
During adsp SSR, after adsp is down, lpass_cdc_runtime_resume
is called in va-marco and fails. lpass_cdc_runtime_suspend is
not called 100ms later. After adsp is up and va-macro considers
lpass_cdc is resumed and not setting clk which causes wcd not
detected. Call runtime_suspend when vote fails to resolve
the issue.
Change-Id: Ice398d0168c5c67f6c98e3122af507ca74837175
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Resolve warning log when hph pa mutex lock is destroyed before
unlock. Initialize hph pa locks as global lock and do not destroy
during SSR to resolve issue.
Change-Id: Idc5af793294f7fdc8dbcc17770f68fe2c46ab337
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
cooling of WSA/WSA2 is to reduce the digital gain.
the cooling callback should only be called when the WSA pointer
has not been initialized.
Also the adjusted volume of RX0 and RX1 need to be set separately.
Change-Id: I6aac0e7a3a3219e8b5c24d711a6c7773824827e9
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
the dapm_mclk_enable flag has not been set back to false
when the actual mclk is disabled.
Change-Id: Ic04756b3dcd074887dd1e93f23cf31873abc1428
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
When WCD AMIC is used and connected to SWR master port3,
DMIC clk div is updated by mistake. Update logic to update
DMIC clk DIV with new flag.
Change-Id: Iee01acf97f925ec54c8d189c13e63acca7ffc2f4
Signed-off-by: Meng Wang <mengw@codeaurora.org>
The digital gain will be adjusted lower than what userspace set
during playback if the device temperature reach the threshold.
Whenever digital gain is changed from userspace, codec will check the cooling
state and adjust the gain.
Change-Id: I52df0f96cf20b90a9bdad70b9c117eed82145fb2
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
