Peer state of mlo sta info is not changed to OL_TXRX_PEER_STATE_AUTH
while Peer state of link sta info is changed to OL_TXRX_PEER_STATE_AUTH
Peer state of mlo sta info should be changed together with link sta info.
When change the state of a SoftAP station, do it for mlo sta info.
Change-Id: I6c157d1381543637d9ce82c9a45864eed6de4396
CRs-Fixed: 3032861
Currently, mode of p2p virtual interface with type managed
is added as sta mode. This may cause issue during p2p find
as in function p2p_vdev_check_valid probe response frames
are dropped for sta mode.
Fix is to convert mode to P2P DEVICE mode from STA mode in
case added interface string contains p2p substring.
Change-Id: I9bf9d8c44af940b42c38cd7819bcdb9c00a90a26
CRs-Fixed: 3036500
For CPU, the enter & exit latency of the deepest LPM mode(CXPC) is
about ~10ms. So long as required QoS latency is longer than 10ms,
CPU can enter CXPC mode. Add 10 ms threshold for allowing and
preventing dynamic RTPM from PM QOS callback.
Change-Id: I8e3026e0e1bab548ab727a52569de9cb17fb5918
CRs-Fixed: 3032657
Driver should set mlo parameters with mlo enable of mlo parameters in
WMI_PEER_CREATE_CMDID
Change-Id: I023578dd87ffec3388ada3bf66c6d58c093047dc
CRs-Fixed: 3033220
Populate mlo IE in assoc response only for mlo connection.
Mlo IE in assoc response should be the last IE to pupulate.
Change-Id: Ibcf63159bde942d6e08eb544c1a799203f0360f3
CRs-Fixed: 3033878
Send additional roam trigger TLV for BTC in
WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID
command, to support a new roaming trigger
"WMI_ROAM_TRIGGER_REASON_BTC".
Change-Id: Ib767bd6bcf005c187b0fb58986ad287fe8753c1b
CRs-Fixed: 3009788
The current logic to wait for the regulatory update is set in
hdd_wlan_start_modules. However, this function is called in both normal
startup and in idle restart. The regulatory event only comes to the
driver on idle restart. Set the flag in the idle restart path only.
Change-Id: I52ac1f2d84650fd3757133c9bc28e87ee2b903cb
CRs-fixed: 3030575
When concurrent STA is present and DBS is capable:
If the concurrent channel is DFS channel, make sure
the maximum SAP BW is equal or less than BW of STA;
If it's NOT, and the maximum SAP BW to be set is 160MHz,
reduce it to 80MHz.
Change-Id: Id2460b9d316bf7b91175611687bada0da11d5a93
CRs-Fixed: 3032225
Network package timestamping is optional for TSF feature,
to make it configurable, add a new build flag
WLAN_FEATURE_TSF_PLUS_SOCK_TS.
This flag will be set only when CONFIG_WLAN_SYNC_TSF_PLUS
is enabled and CONFIG_WLAN_SYNC_TSF_PLUS_DISABLE_SOCK_TS
is not.
Change-Id: I413e85fadf93264cd41c2739b6d870aa08d60efb
CRs-Fixed: 3027378
TWT params are optional attributes for TWT suspend operation.
Do not mandate the check for TWT params for TWT suspend command.
Parse the TWT params if attribute is present in the suspend
command else use the default value.
Change-Id: I62fa5e0e8a9c0346957184b9578bdd273017df21
CRs-Fixed: 3027776
In the SAP + p2g go SSR case, wpa_supplicant
will receive INTERFACE_UNAVAILABLE while driver
is doing SSR, then it will triger wpa_supplicant
to remove the p2p go from the interface and
change the mode from NL80211_IFTYPE_P2P_GO to
NL80211_IFTYPE_STATION. But it has the possibility
that switch mode failure due to qdf_is_recovering
is true from __dsc_vdev_can_trans, then
wpa_supplicant will get error code -EINVAL from
wlan_hdd_cfg80211_change_iface.
But current wpa_supplicant just only support
mode switch retry in the EBUSY case, so change the
return value from EINVAL to EBUSY if driver is
in recovery state to let wpa_supplicant has the
chance to do mode switch retry in the SSR case.
Change-Id: Id0f959a1e8386061d0258f520dba17e9efae1d08
CRs-Fixed: 2929212
Currently wlan_hdd_mgmt_tx path is still using legacy API to convert
channel frequency to number, it is not applicable for 6Ghz channel if
convert it back from number to frequency.
Fix it by replace all places where using legacy API to convert channel
and use channel frequency from supplicant directly. It can fix mgmt tx
from supplicant on 6Ghz channel.
Change-Id: I60fe37d7d716eeaceaa00f3fb59c77b629ebacac
CRs-Fixed: 3024898
Output of log in hdd_enable_igmp_offload() should be igmp, not gtk.
Hence, change the log to print igmp instead.
Change-Id: I3a84b1d9e38abce1e57dd5823b833ee5bc173b57
CRs-Fixed: 3032679
When we request bus bandwidth by tx/rx pkt on armv7(32bit).
The timer statistical value of bw_vote_time is overflow,and
become small.So, next time, the diff_us calculate result is huge,
the total pkt is always zero.so the request always fail.
Change-Id: Ifaff8abd2b901f5f32f7a95b347365678cf2f3c4
CRs-Fixed: 2983899
ARP response dropped at OSIF due to non-availability
of sta entry with MLD address.
Added sta entry in OSIF/HDD context with MLD address.
Change-Id: Iff70197ca5707b88ea80b42a60a2b1fb383f00a9
CRs-Fixed: 3017249
The operation class field in RNR is using global operation class.
When getting frequency from RNR IE, we should search operation
class in global operation class table.
Change-Id: Ie9ff62e1d98cb10debfcff734e28ffaecf14e321
CRs-Fixed: 3031211
During unload driver, if hdd_reg_notifier to be called
from kernel, it has the possibility that cause
regulatory_update_event to be reset after it has been
destroyed, which causes "Failed assertion 'event->cookie
== LINUX_EVENT_COOKIE'". So adds this fix to ignore the
regulatory notify request if it is in unloading state.
Meanwhile destroy the event after unregister wiphy
also can help on such kind of issue.
Change-Id: I527517c7f1443a4e211782f74b03e2fca40ab552
CRs-Fixed: 3028357
CSA IE TX isn't offload to FW, the count of Beacon with CSA IE
actually DUT sent exceeds the required. So, this change clear CSA IE
and update Beacon frame.
Change-Id: Ib433b9d2877b332365a4cfdf1a6bca56d6194672
CRs-Fixed: 3008327
In order to support four STA default interfaces
to be created and up after driver loaded, it
requires setting bmiss_offload_max_vdev=4 to
Hastings fw. So export this variable to be
configurable and can be modified if in need.
Change-Id: I25db5dd72de7d45c6be682891abba711edaf20dd
CRs-Fixed: 3030148
For STA connection in HE 160, HE160 MCS is validated
during the session creation. If the HE160 is invalid,
the connection falls back to 80MHz. But, this check needs
to be bypassed for SAP, because during session creation SAP
will not have the peer capability, so the HE160 MCS validation
needs to be bypassed.
Change-Id: I3bbb2f35c40a123b5d05a94038970a0e7e43ac60
CRs-Fixed: 3025102
