Break up the 2MB descriptor bank memory allocations for WBM
idle link ring. Use multiple page allocation and populate the
WBM idle link descriptor ring with physical addresses of each
DMA page allocated in the descriptor bank.
This is to ensure that no requests for contiguous memory
allocations are made that might result in allocation failures.
For MCL set the page size to 4KB and leave it to max_alloc_size
cfg ini param for WIN specific code.
Change-Id: Iec30321044827c0174366cc02df25a42d38309e0
CRs-Fixed: 2565817
In case of nbuf map failure as part of htc_send_pkt for
tx credit flow disabled endpoints, htc pkt is not put
back in the freelist as return status is not checked
resulting in memory leak.
Fix is to put the htc pkt back in the freelist based on
status returned by htc_send_pkt.
Change-Id: I9173fa3684bc887a360b92d48b689c53a5ad5dbe
CRs-Fixed: 2596297
Command ring is now renamed to credit ring on QCN9000
and used for credit based flow.
Renaming the ring to give meaningful name.
Change-Id: I726aed19477fcfb256e4e0cca8ddb9389035b58c
CRs-Fixed: 2562640
Peer key security type is set in cdp_set_pn_check,
this API is called in key install step, but only
update Ucast field even if in Mcast key install.
This may be set wrongly if Ucast and Mcast security
modes are different. Add a new API to set security
modes of differ key types separately.
Change-Id: Icaa63139d117de75633ca1f81eb618c6b9294b53
CRs-Fixed: 2617461
Increase the peer ref count before requesting for reo
queue stats and release the ref count after receiving
the queue stats on the reo status srng.
Change-Id: Ife3b87951e767414efa1bfb45486cd364578d2a7
CRs-Fixed: 2604862
For qcn9000, As part HW enhancements, PPDU_ID is sent
in reo_entrance_ring descriptor instead of RX_MPDU_START
tlv. Add support to read ppdu id from descriptor.
Modify existing hal API hal_rx_hw_desc_get_ppduid_get ()
arguments to pass RxDMA ring HW descriptor.
Usage:
a. Use hal_rx_hw_desc_get_ppduid_get () -
to get ppdu id from rx_tlv_hdr or hw descriptor based on target.
for qcn9000, this API gets ppdu_id from HW descriptor,
for other platforms, gets ppdu_id from rx_tv_hdr
b. Use hal_rx_get_ppdu_id () - to get ppdu_id from rx_tlv_hdr
Change-Id: I5838227c12cde50cbb2a9da7a0d8056b8b9b7ef5
FSE setup, FSE cache flush and FISA config commands do not have
response, tag them as HTC_TX_PACKET_TAG_RUNTIME_PUT so that get on
runtime_pm is released. Without this target fails to go to runtime_pm
suspend.
Change-Id: Ibb14484dd50c62bb4680b41acf93ce3da1bec796
CRs-Fixed: 2606884
Memory optimization of unused TX rings by not configuring rings that are
not being used. Configure 2 rings for host in the case of IPA, instead
of configuring 3. If IPA is disabled then configure only 1 set of TX
rings for host.
Change-Id: I251606c728f3020a13e45e8c8386970c8a641f0a
CRs-Fixed: 2530572
Currently computation of Rx rate depends on Multi-user MCS
and NSS even for SU PPDU. For Single User PPDU, this becomes
invalid since computation of Rx rate should be based on SU MCS
and NSS.
To fix this, use respective PPDU information(MCS and NSS) and
calculate Rx rate based on ppdu_type.
Change-Id: Ic18cbabe192e2cafce5cdceb5644368ff6b7c9fb
CRs-fixed: 2617063
Do not process or drop rxdma error decrpt frames. In case of
decrypt error the decryption is not proper and Rx OLE gets
corrupted bytes. So accessing these can lead to invalid buffers.
Change-Id: Idb3f942facf08fc26bde0fd9826db28955ca01d5
CRs-Fixed: 2613068
Currently if any layer tries to delete a peer which
has already been deleted, there is no check to stop
the delete operation. Deleting an already deleted peer
is incorrect.
Check if the peer is valid before we try to delete
the peer.
Change-Id: Icc280554a652e0ee3f1ea38c98fb130ea3c1ae80
CRs-Fixed: 2613595
Rather than extracting msdu end pkt tlv information per field basis
during fast data path, extract msdu end pkt tlv information at once
and store in local structure.
Change-Id: I0877ba4f824d480cc0851c72090f010852d0d203
Drop the packet if msdu_done bit is not set while processing
rxdma err frames. This is not expected while reaping WBM RX
release ring.
Change-Id: I8776d15ea88319d7d955fdae90958648484dbda0
CRs-Fixed: 2603791
Maintain packet counters for each peer based on protocol. Following 3
protocols are supported
* ICMP (IPv4)
* ARP (IPv4)
* EAP
Change-Id: I56dd9bbedd7b6698b7d155a524b242e8cabd76c3
CRs-Fixed: 2604877
A framework is added where the filters for every
mode are stored on a radio instance. Whenever a mode comes
up, it stores the filters in the radio and calls a
common API which iterates through all the enabled
mode filters and loops through them to create a
superset of filters which is sent to HTT.
This framework can be extended for new feature addition
which set filters for the monitor status and monitor
destination rings.
Change-Id: I9b739af2086bbe261b65c57af0a5bd867294f30f
CRs-Fixed: 2585872
pdev_id and mac_id were incorrectly passed
as arguments to dp_get_lmac_id_for_pdev_id
Fix passing the arguments in right order to
the API to access appropriate lmac_id
Change-Id: I42773a6ccae2f87f128d3c462e6a332fe658f45e
CRs-Fixed: 2611926
Replace QCA_WIFI_QCA8074_VP with CONFIG_WIFI_EMULATION_WIFI_3_0
since VP platform is not being used anymore.
Most of the parameters present inside QCA_WIFI_QCA8074_VP are related
to emulation timeouts. Hence replacing it with a more meaningful flag.
Change-Id: I22a0e5803e765333947f1613b376dcc6bd25b5af
In the function that processes rxdma err frames add null check
before calling vdev callback function. If its valid then deliver
the skb to stack or free the skb.
Change-Id: I7c481eb8f702d9109c4a9f79db7e050ece6c3689
CRs-Fixed: 2607658
AST entry delete logic has some conditional checks making code with respect
to HTT V1 and V2 messages making it tough to follow.
Change-Id: I229324446134b32021a956fb689e4726256fcc28
Add a framework to configure varying buffer size for both data and monitor
buffers.
For example, with this framework, the user can configure 2K SKB for Data
buffers, monitor status rings, monitor descriptor rings, monitor
destination rings and 4K SKB for monitor buffers through compile time.
Change-Id: I212d04ff6907e71e9c80b69834aa07ecc6db4d2e
CRs-Fixed: 2604646
In case of wlan suspend if packet log is enabled stop the
monitor reap timer and reap the pending frames in the ring.
Also in case of FW target suspend ACK status reap monitor
status ring. During target suspend FW will disable the monitor
status ring. This change will make sure no pending frames in
the ring during start of system suspend and the target suspend.
Change-Id: I350fa508f3ddd125d5e00a7fc60e89507ce8fb4e
CRs-Fixed: 2604389
Lithium HW can parse each MSDU when packets are enqueued to transmit
classifier and each MSDU can get enqueued to different MSDU-Queue.
By default, there are 2 queues per TID – UDP and NON-UDP. Based on
the flow parsing, packets will be queued to either of them.
Enterprise customers uses RAW mode frames which transmit classifier
would not be able to identify L4 protocol for UDP or NON-UDP queue
for encrypted frames.
Customer can also have different application based packets which needs
to be enqueued to differently prioritized queues. They can choose to
tag each MSDU based on application DPI and derive the flow priority
as below –
• UDP
• NON-UDP
• HI-PRIO
• LOW-PRIO
Customer needs API support from host which will provide an ast-index
based on a particular flow id given peer mac address. Based on the mac
address, host will find the associated peer and return the ast_index &
cache set number corresponding to the flow id from peer flow based ast
entry table. Customer will then program this ast-index and ast override
in transmit classifier CMD ring to enqueue MSDU to a specific
flow-queuein TQM.
Host API:
Input parameter – uint8_t *peer mac address, uint8_t flow id
Output – uint16_t ast_index
Change-Id: I79557c31532514ad5ec0c1848827a3e5cd91cdf2
Add API to set/get monitor vdev count in pdev object.
Also update the max peer count in pdev and psoc when FW allocated peer
count is different than host requested.
Number of vdevs and beacon tx offload max vdevs in wlan_res_cfg are updated
in target_if_update_pdev_tgt_info().
Also, add radio related parameters to get number of vdevs and peers per
psoc and pdev.
Change-Id: I0165f3bd4638280b45ad54391319806fba62e2fe
CRs-Fixed: 2600984
long length msdu is received and looks this msdu is spread across
multiple nbufs, there is no corresbonding logic for this case.
qdf_set_pkt_len will invoke pskb_expand_head to renew skb->head
buffer, but the rx_tlv_hdr is still pointed to original skb->data
buffer, invalid accessing will happen.
As a WAR, drop this msdu related nbufs after dp_rx_sg_create is done.
Change-Id: Iceb09fd04e4d768325018a8ddd4261ab4f75991a
CRs-Fixed: 2597927
Crash scenario:
(1) frag data A is dropped and related RX desc A is replenished
and reused, but pdev->free_list_tail is still pointed to RX desc A.
(2) frag data B/C is coming, defrag fails then pdev->free_list_head
will point to B-->C RX desc, but pdev->free_list_tail still point to A.
(3) for defrag failing case, host only will replenish 1 RX buffer for
current case, RX desc B is replenished, while C will be free back to
RX desc pool.
(4) dp_rx_add_desc_list_to_free_list will set RX desc A-->next =
free_list, free_list point to C insted.
(5) when step (1) RX desc A replenished buffer indicated to host by
REO2Dst ring, RX desc A -->nbuf actually is pointed to another RX
desc, invalid skb accessing will happen.
Solution:
a. reset tail pointer in dp_rx_add_desc_list_to_free_list at last.
b. reset tail pointer same as head in dp_rx_add_to_free_desc_list
if head->next is NULL.
c. set correct rx_bufs number for replenish when dp_rx_defrag fails.
Change-Id: Ib297baea3605a09dd7d85d1f5ceb95db48a2e1f1
CRs-Fixed: 2603676
Use lmac_id to get the rx_desc_pool while freeing
the rx_desc_pool for rx_desc_buf.
Change-Id: I549e7f54b267d2c82dceb391a766297dfe18ceb7
CRs-Fixed: 2608209
Ensure monitor mode interrupt masks are set as they are DP_INTR_POLL
type. Move wlan_cfg_fill_interrupt() call to inside dp_soc_attach as it
is called before dp_soc_init.
Change-Id: Id9c49e3ed5c01e7c1bf641fa4c2f419d31381608
CRs-Fixed: 2608683
Incorrect size is given while copying pdev stats.
Fix this by properly passing pdev stats struct
while calculating size of pdev stats.
Change-Id: I4b4be2542d092c5c984252a62e2406cb1e83bcd8
CRs-Fixed: 2603674
Add ast-type as argument in wds peer create command.
This helps to identify the ast entry from the time when ast add is done.
Change-Id: Ia0c073cf8f2573608e6a84410dffee6edf9b064b
