Currently when Adaptive 11R feature is disable via ini
then user space parse Vendor Specific IE and trigger
connection in FT-PSK/EAP based on STA configured key
mgmt, but due to feature disabled via ini it failed
to connect AP and trigger Assoc reject to user space.
To overcome this advertise Adaptive 11R supported feature
bit to user space and based on this feature bit user space
parse, trigger connection in FT-PSK/EAP other wise fallback to
PSK/EAP.
Change-Id: I5d67a0cb77c3f39328467a6313a7a795e6a7a4d8
CRs-Fixed: 2785878
Firmware sends peer create confirmation to detect duplicate peer
on other vdev. If the status field in the
wmi_peer_create_conf_event_fixed_param is 0, peer creation is
successful.
Add support to handle the peer create confirmation command for
sta mode. For roaming scenario, the peer will be internally
created by the firmware, so bail out after creating object
manager peer/datapath peer without sending the peer create
command similar as the current implementation.
For SAP/P2P Go mode the legacy peer create path will be used.
Proceed to do post linkstate change if status is success, else
do vdev stop and indicate failure to upper layers
Change-Id: I0abbd70dd509f2b9afa8d4d7db1774e289d1e021
CRs-Fixed: 2747870
Add new ini "monitor_mode_concurrency" to support this feature
and introduce policy manager api's for concurrency checks.
Change-Id: I35ee1fece0a6f9ae8fe340b0598c4a3e20b17e82
CRs-Fixed: 2814523
cds_get_context() function already takes care of logging the
caller function name in case of any error.
Hence there is no need to add the error log again.
Getting rid of these unnecessary logs reduces driver memory footprint.
Change-Id: I5bf676c79e9e12a797dc6792ee8014fb30b0dff3
CRs-Fixed: 2821005
The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the btm response.
This helps to debug the scenario when roam failure happen.
Print the info received related to roam scan type & roam status
info into kmsg.
Change-Id: Idd688eb4d1e699573fa1e243873c30ffdc5bf96f
CRs-Fixed: 2794555
INI he_twt_requestor and he_twt_responder should be able to disable/enable
twt requestor and twt responder.
Make them work.
Change-Id: I5e091a2f04cca1817f1a2db6358f141c2eaf103d
CRs-Fixed: 2798800
Use uint32 variable to populate he_mcs_12_13_supp from ini
he_mcs_12_13_support.
Previously, uint16 variable was used which was populating
he_mcs_12_13_supp_2g correctly but was disabling
he_mcs_12_13_supp_5g.
Change-Id: I28cd2060799a9f46f79860bdf9a3ede1574c9112
CRs-Fixed: 2789303
For STA+P2P GO case, DUT sets operational rates when connecting to AP
as STA, and overwrites it when DUT forming P2P connection as P2P GO.
So, add this change to save operational rates to vdev mlme legacy
object, and avoid to overwrite for other inferfaces.
Change-Id: I2bfbecbc9bc50b8943b1e3de516782e70b125ce2
CRs-Fixed: 2773943
Add ini he_mcs_12_13_support which will be used to enable
or disable 4K QAM MCS rates.
This ini can be used to set. MCS 12 and 13 for 2.4Ghz and
5Ghz. First 16 bits(0-15) is for 2.4ghz and next 16 bits
is for 5Ghz. Of 16 bits the higher, first 8 bits represent
BW less than or equal 80Mhz (<= 80Mhz) and higher 8 bits
represent BW greater than 80Mhz (> 80Mhz). nth bit in octet
represents support for nth NSS [n=1:8].
Def value is 0xFFFFFFFF which enable MCS 12 and 13 for all
NSS and BW.
Also, enable 4K QAM MCS only when this ini is enabled and
firmware also supports it.
Change-Id: I8375203735d8b07ef4ff86be2213da127be4e556
CRs-Fixed: 2762230
While initial connection with SPMK AP1 supplicant generates
PMK1, and DUT updates global mlme single pmk entry and
csr session pmk.
Now DUT roam to non-SPMK AP2 and generates PMK2, Global mlme
single pmk has SPMK AP1 PMK1 and csr_roam_session has non-SPMK
AP2 since FULL SAE happen.
Now Roam back to SPMK AP1, since the Full SAE does not happen
and due to check roam_synch_data->authStatus ==
CSR_ROAM_AUTH_STATUS_AUTHENTICATED in
csr_process_roam_synch_callback(). The lookup and update
csr_roam_session code is not hit and driver don’t update
csr session pmk after roaming to SPMK AP. So after roam sync complete,
csr_check_and_set_sae_single_pmk_cap() updates the global mlme
single pmk with session->psk_pmk. This results DUT uses PMK generated
from a Non-Single PMK supported AP in the ReAssoc Request frame
while Roaming to Single PMK supported AP.
Fix is to allow driver to update session->psk_pmk even in case
Full SAE does not happen.
Change-Id: Ie4f06cfcb066ae245de024b62da586aade783aec
CRs-Fixed: 2761771
Add checks in caller APIs to handle negative return value from
crypto get param and crypto get peer param APIs.
Change-Id: Ibb138971f347c7ccdacbc93aa38521d5d9536759
CRs-Fixed: 2775328
Currently, the APIs related to setting the preferred channel list is
in the SME module. Move these APIs to the policy manager so they can
be accessed from non-legacy modules.
Change-Id: Icc487dd2a0014e59db9c2df729b875f58e3e975e
CRs-fixed: 2766863
Currently INI: gFirstScanBucketThreshold is not used
while LFR2/LFR3 roaming.
Remove unused INI gFirstScanBucketThreshold
Change-Id: Ifa909fc57d3ac3da696369fcffc390826f393b44
CRs-Fixed: 2767372
Increase max sae auth frame retry count to 3 since total SAE auth
timeout is 5s.
Change-Id: I5902cc3411f713eaeed5ef7754fe7fe8e590b459
CRs-Fixed: 2765211
Currently the driver enables the SRD channels
support for both P2P_GO and SAP if the SRD master
mode is enabled.
Have individual ini values to enable/disable
the SRD channel for each op-mode as required.
Change-Id: If6e66996ed19dacbde7f71a6702f378a7e9a273c
CRs-Fixed: 2748446
When sta_sap_scc_on_dfs_chan = 0, SAP is not allowed to SCC
with STA on DFS channel. Check the SAP target channel DFS flag
considering the target channel bandwidth.
Change-Id: I321c1055574477fe39ca8569f24a4040c8dc1904
CRs-Fixed: 2756518
Host sends the WLAN_MSG_WLAN_STATUS_IND to WiFi Location Service(WLS) via
cnss daemon which includes supported channels. WLS service is yet not 6GHz
capable. Hence to limit the 2.4GHz/5GHz channels only in
WLAN_MSG_WLAN_STATUS_IND introduce new INI "wls_6ghz_capable".
Change-Id: I77b284d2025601fec72aa35d430f18865f15f247
CRs-Fixed: 2748489
Currently driver sets the NOL state of the channels to false
on every regulatory updated, which indicates the channel is
not in NOL. Which may lead to some issues where the channel
is actually in NOL but host treats it as non-NOL channel.
Ideally NOL list should be maintained throughout the driver
lifetime and across the regulatory changes.
To address this issue add a logic to not update the NOL state
of the channels whenever the regulatory update is received.
CRs-Fixed: 2744916
Change-Id: If96b22ab29a60a2aa752bbf01aaae46fc37362eb
Add changes to include new roam scan sub-reasons in host driver
roam logging and refactor few existing string.
Below are the new reasons:
WMI_ROAM_TRIGGER_SUB_REASON_LOW_RSSI_PERIODIC
WMI_ROAM_TRIGGER_SUB_REASON_INACTIVITY_TIMER_LOW_RSSI
WMI_ROAM_TRIGGER_SUB_REASON_PERIODIC_TIMER_AFTER_INACTIVITY_CU
WMI_ROAM_TRIGGER_SUB_REASON_PERIODIC_TIMER_AFTER_INACTIVITY_LOW_RSSI
WMI_ROAM_TRIGGER_SUB_REASON_INACTIVITY_TIMER_CU
Change-Id: I1aeb48d29561b48ac7b8762626fa0050f4fb9030
CRs-Fixed: 2742558
Add new channel 177 to wiphy struct ieee80211_channel
hdd_etsi13_srd_ch and rename the struct to
hdd_5dot9_ghz_ch.
Add a new ini fcc_5dot9_ghz_chan_in_master_mode to
enable/disable new 5.9 GHz channels 169, 173 and 177
in master mode.
Change-Id: I68dc3be18277ca0e416a579327f406279458899e
CRs-Fixed: 2693707
Add macro ROAM_OFFLOAD_V1 for new code and implement below functions
for connection manager roam part:
csr_handle_roam_state_change() roam offload state related handler.
Filling WMI_ROAM_SCAN_RSSI_THRESHOLD cmd parameters related process.
Change-Id: I0351155ca5a3d68ade6568c7527c5708582ccf1a
CRs-Fixed: 2730826
The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the btm response.
This helps in debugging/understanding the scenario when roam
failure happens.
Print the info received related to btm rsp and roam initial
info into kmsg.
Change-Id: Icb2058eed5df3265018b3c53548d123f3a4faf4f
CRs-Fixed: 2728267
The band_capability field is used in other places to be
a bitmap over reg_wifi_band. Update the field in wma_tgt_cfg and
wlan_mlme_generic to take the same bitmap for consistency.
Update all references to these fields to expect a bitmap as well.
Change-Id: I8abd697e2fbe02b4eadd32f3027bef7408bac2a0
CRs-fixed: 2726710
Introduce new INI sae_connect_retries to decide auth (initial connect
and roam auth) and connect retry for sae. MAX reties is capped to 2
and max for roam auth is 1.
Default is 0x49 i.e. 1 retry each.
Bits Retry Type
BIT[0:2] AUTH retries
BIT[3:5] Connection reties
BIT[6:8] ROAM AUTH retries
Change-Id: Idae86a7bdb32244c7f3a140b8591418b8238758a
CRs-Fixed: 2728458
Add new ini enable_dual_sta_roam_offload to enable/disable dual
sta romaing feature. Enabling this ini will allow firmware to
roam on both the vdev if firmware supports dual sta roaming and
the hw is dbs capable.
This ini will be checked in the dual sta roaming offload state
machine to enable roaming on both the STA or to fallback to the
current implementation where first connected sta will have rso
enabled.
Change-Id: I04f141ac31e0f168b6f19fe878bca219a36cfae7
CRs-Fixed: 2709036
Currently the driver supports the dynamic
configuration of nss and chain to FW for
VDEV if the FW advertises the capability
of supporting the same. However there is
no support to overide this.
Fix is to have an ini to enable/disable
this feature of configuring the dynamic
nss and chains to FW.
Change-Id: I0b84bb5aec53966a43a00c11d4aba3863414005c
CRs-Fixed: 2708303
In the beacon, ESS report element gives the information of a BSS
that station learns and uses for roaming. Hence enable BIT(16)
ROAM_TRIGGER_REASON_ESS_RSSI of "roam_triggers" INI.
Change-Id: I47f35c3fad640054a54ccb3874475a1c59b51489
CRs-Fixed: 2688522
Change the prior conditions required for configuring Rx Chainmask &
Tx Chainmask.
Below conditions should be met for setting chainmask:
1. Antenna sharing should be disabled.
2. If gEnable2x2 is 1 then enableBTChainSeparation must be 1
else gEnable2x2 should be 0.
3. DBS should be disabled (gDualMacFeatureDisable = 1)
or HW should be DBS 2x2 capable
4. set TX/RX chainmask 3 in ini (gSetTxChainmask1x1/gSetRxChainmask1x1)
5. HW should support TX/RX chainmask as 3
Change-Id: If83c55af47abb591cdf1b5d2e3981d80bc305bf2
CRs-Fixed: 2705520
Implemented driver interface for NL command for setting
and getting TX and RX chains. The chains can be set to
either chain 0(1) or chain 1(2) or both(3). This is only valid if
antenna mode is set to 2X2.
Below command can be used to set the chainmask:
iw phy <phyname> set antenna <bitmap> | all | <tx bitmap> <rx bitmap>
Example:
iw phy0 set antenna 1 -- to set both Tx and Rx chain 0.
iw phy0 set antenna all -- to set all/both chains for rx/tx
iw phy0 set antenna 1 2 -- to set chain 0 for tx and chain 1 for rx
Below command can be used to get the chainmask after set:
iw phy <phyname> info
check for "Configured Antennas: TX 0x1 RX 0x1"
Below conditions should be met for setting chainmask:
1. Antenna sharing should be disabled.
2. gEnable2x2 in ini file should be 0
3. enableBTChainSeparation in ini file should be 1
4. DBS should be disabled (gDualMacFeatureDisable = 1)
or HW should be DBS 2x2 capable
5. set TX/RX chainmask 3 in ini (gSetTxChainmask1x1/gSetRxChainmask1x1)
6. HW should support TX/RX chainmask as 3
Change-Id: I04f6667398eac405a6be61bc039e048090578abf
CRs-Fixed: 2693370
RMC is IBSS specific and CFG_RMC_ACTION_PERIOD_FREQUENCY is not used
now so remove the same
Change-Id: Icafff4bd7eb508d92c383861300146e3a0f2def7
CRs-Fixed: 2689882
The roam sequence in LFR-3.0 is roam scan start notification
from firmware followed by roam start indication and then
roam synch,roam synch frame events. Roam start is sent
after candidate selection and host driver will disable
queues when roam start is received.
But for emergency roam trigger, firmware sends roam start
indication directly without notifying roam scan start to disable
data path queues immediately after deauth received from the AP.
So roam start is received before roam scan is started at firmware
and before candidate selection is done.
After roam start notification, host sends scan abort for all scan
on vdev by setting scan command request type to
WMI_SCN_STOP_VAP_ALL. This results in roam scan getting aborted at
firmare in emergency deauth roaming case and roaming fails.
Define new vdev id value based on which the scan module will
abort only host triggered scans setting the request type to
WMI_SCN_STOP_HOST_VAP_ALL in the scan request.
Change-Id: Ie8b005285973461f654329e1b2dc1a45205331f5
CRs-Fixed: 2644323
Add sanity check for mlme_obj in wlan_mlme_update_oce_flags to avoid
illegal memory access when mlme_obj is not valid.
Change-Id: I7dfd72cc704d3f9c11241fb2217f0b2ab7eda3d3
CRs-Fixed: 2669262
Currently, the driver trims the channel list with
the PCL if external acs policy ini is set, and
if the channels are unsafe then that can lead
to 0 channels and the SAP can fail.
Fix is to check whether the force SAP start ini
is set and override the channel.
Change-Id: If245bf27deda0f6022343d7a175520fdd92d106b
CRs-Fixed: 2667742
Made the default value to advertise trigger frame padding
duration as 16 us so as to honor HE MAC capabilities sent by FW
Change-Id: I1bf75965f1b9b46d61c94997273621a6e9de46c1
CRs-Fixed: 2667623
When set_pmksa command is received from userspace, the internal
pmk table is updated with the new bssid entry and the pmk is saved
to the session. Additionally this update triggers an RSO update
command to the firmware which causes the use of stale pmk for
single pmkid case, in which the BSS capability of SAE single pmk
will be known only after parsing the beacon/probe received in the
roam synch indication.
So donot send RSO update on receiving set pmksa command.
Change-Id: I25419fbc3061ab963ccf3228b3681c83773a7963
CRs-Fixed: 2659055
Increase the roam failure reason string buffer size to
60 from 50.
Also add reason string for roam failure reason.
Change-Id: I42f4332463e4063aa0dee39631ca31965db12b62
CRs-Fixed: 2647260
Add host driver support for MCS 12/13, a Q-Q PHY feature.
The following changes are being introduced as a part of this
- Advertisement of the MCS 12/13 using the QCN IE
- Interaction between the Host and the FW regarding the target and
peer capabilities for the new features introduced.
- The new data structures and variables to populate and use the feature
capability
- Routines to add and parse the IE.
Change-Id: I2b91a271d30b1230ef7bb14ee08d0b9da2706db4
CRs-Fixed: 2610277
