When ssr is in progress, during some race conditions
mbhc events are getting reported when codec is still
coming up. Ignore such events without reporting.
Change-Id: I3d3f78f97c2b855fc36a480f38c166bda2d979f0
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
WSA macro supports both ec_legacy and ec_hq.
Add support to capture echo for both types
based on mixer control value.
Change-Id: I3c8a6cd13dabbee3f3687d5e63dc6d4c7bbc4eef
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support for DMICs of different sampling rates
with respective clk_div config update in VA macro
register.
Change-Id: I8faa46774cf1fe561af3bd7a284bc7d37f85cb9d
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support for regulator enable and disable to
source micbias for VA digital mics.
Change-Id: Ie25fb65103704b04127b23f4c515d6d270f4abf0
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add codec entry for bolero codec under proc codecs list.
Update the names of wsa-macro gain offset and mode for
wsa8810 variant to avoid conflict with wcd9335.
Change-Id: Icaa2ef7c2f7253060cd7cccd44130b0b12dc0713
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
In vipertooth, both wsa-macro and wcd9335 are present.
wcd9335 doesn't have wsa attached, and wsa-macro supports wsa
attached which defines spkr wsa controls. wcd9335 driver needs to
avoid register same controls if wsa is not attached to it.
Change-Id: Ia3db8982b5214ade95e6d8f27a44a68e20b772a0
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support for audio drivers compilation on kernel-4.14.
Change-Id: Id7689cef4ae7cdb6711fed386d2a6b0d427b3fc3
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Comparison of headset threshold during special headset detection is
not proper. This results in to improper detection of special headset
and recording usecase failure on special headset. Fix the special
headset detection issue by adding proper check condition while selection
of headset threshold from device tree.
Change-Id: I4c338ded1bcb9fa643e1584eb23c6260fe52acee
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
soundwire bus driver changes to support new soundwire
master driver for Talos/vipertooth.
Change-Id: I70e52a72edd80abc72ccb99b29b1a642debec257
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Cancel any pending delayed work in device down call
to ensure no work is scheduled during or after a
SSR/PDR sequence.
Change-Id: I4cc89cb1a9d8be732c978044d4eea3cf6644ec30
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Use hardware default value for boost state in regmap.
Use correct mask for initial value of boost state.
Change-Id: Ia8b707ba0128662d47059d25325693bc8eaff723
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
Add compile support for bolero codec driver and other
interface files along with macro drivers.
Change-Id: Ifa9c5454eebab1dbebb53d60a7a67458d1e6c8f6
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support for VA digital portion to register
as macro to bolero codec. ASoC dapm and dai
functionality of VA macro is associated to
bolero codec itself.
Change-Id: I3c5ae045c0e061bd9aa1281231cf2418093d1169
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support for WSA digital portion to register
as macro to bolero codec. ASoC dapm and dai
functionality of WSA macro is associated
to bolero codec itself.
Change-Id: Ida9647274e6a0aa392e131a9b08f83b2520802e5
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Update file names of bolero to be compliance
to driver file name convention.
Change-Id: I138d0211803f93152ae7fb01eae68050dada082f
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Reset power_active_ref counter to 0 when it is negative to
take digital core out of reset during next session.
Change-Id: I724ffe6e3547655424238ca02a9bf8ac24b101fe
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Add support for bolero clock changes for
all macros.
Change-Id: Ib7b238ffd9595b6fd2236f4a3d2bcfe545b3c5fb
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add bolero driver to provide interface to all
macros and represent as a single codec to ASoC
framework.
Change-Id: Ie4cd3b9422ff9691dd37b40fc243573d7536860c
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
wcd9360 also has to be compiled if kernel build option is
true for the case where modules are in y option.
Change-Id: Ie3cea21d65ccc7e680cac675720bab52411ac492
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
If wcd9360 config is removed, need to stub out the
APIs to load any dependent audio modules and enumerate
sound card.
Change-Id: I821938c68849984ee04565167488abe5fe15af40
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Runtime suspend in slimbus driver makes QMI call which takes
wakelock and result in first system suspend to fail. As a result
of first suspend fail, POST_PM_SUSPEND event is dispatched to
thermal core which registered to pm notifier. WSA being one
of registered thermal zone gets query for temperature, and makes
slimbus reads/writes which will result in runtime resume of
slimbus driver to happen. System suspend fails again continuously
in this endless loop as slimbus runtime suspend will make QMI call
again.
Update wsa temp sensor to handle suspend event by registering to
pm notifier and ignore the temperature request from thermal core
at resume. This will avoid slimbus reads/writes during suspend in
progress and allow XO shutdown to happen.
Change-Id: Id13a9701cffb1231ef7d563cbc30756fd71d5868
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
If wcd934x config is removed, need to stub out the
APIs to load any dependent audio modules and enumerate
sound card.
Change-Id: If885d4d1f0ee83448ac41ed66b51f078978cb7d1
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
Add DP codec DAIs to support multiple streams that
audio can be routed to dp controllers with
multiple streams in them.
Change-Id: Id28e6b8cc2989797dd07252cdc8913bc3b403f19
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Use CONFIG_ARCH_SM6150 for Talos to enable
proper compilation.
Change-Id: I14e06122116c431bf4b99da3a061d165f68e0d4f
Signed-off-by: Tanya Dixit <tdixit@codeaurora.org>
Change info logs to debug logs for all trivial
audio codec core logs that appear in boot up.
Change-Id: I797b876f2a9d72a72c3378acac0d8d7f11b5c4a5
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add MSMSTEPPE in the makefile rules to enable
compilation for SDM640.
Change-Id: I36437404d98229c8b292fd63304498122d8c8687
Signed-off-by: Tanya Dixit <tdixit@codeaurora.org>
Currently, for some small (1/4/8 bytes) transfers, the driver uses
on-stack memory to perform the transfer. This is not safe as the
underlying master/dma driver could try to map/dma this memory.
Change makes sure to never use on-stack memory for any transfers.
Change-Id: I6b157e26ea7ca9f865004a87153c658756f6c368
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Update all audio drivers to use updated chipset name in
files, functions, architecture specific configurations
and the device tree compatible strings.
Change-Id: I507948866213ddb8806edea71a57c1f29ce7e71b
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
