When ssr is in progress, during some race conditions
mbhc events are getting reported when codec is still
coming up. Ignore such events without reporting.
Change-Id: I3d3f78f97c2b855fc36a480f38c166bda2d979f0
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Set topology info to q6core service in ADSP so that the
modules in a topology can be loaded before the usecase starts,
thus reducing usecase setup latency. The same topology is
unloaded before vocproc or copp is destroyed or replaced.
Change-Id: I5f8872130fb09f049e080c61edb8bb0b05e5e2de
Signed-off-by: Vikram Panduranga <vpandura@codeaurora.org>
Fix for getting the parameters for codec dma interface
from mixer controls and apply to port config.
CRs-Fixed: 2248380
Change-Id: I351c32e868b8fd3fde3eabbeef89b625a7bf8598
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Enhance APIs to get instance id and stage info from userspace,
required for multi-stage Voice Activation in ADSP.
Change-Id: Ie39a3d002a56fb8df0c241089a50d55ef700a538
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
WSA macro supports both ec_legacy and ec_hq.
Add support to capture echo for both types
based on mixer control value.
Change-Id: I3c8a6cd13dabbee3f3687d5e63dc6d4c7bbc4eef
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support for DMICs of different sampling rates
with respective clk_div config update in VA macro
register.
Change-Id: I8faa46774cf1fe561af3bd7a284bc7d37f85cb9d
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support for regulator enable and disable to
source micbias for VA digital mics.
Change-Id: Ie25fb65103704b04127b23f4c515d6d270f4abf0
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Fix codec dma dai ids in machine driver same
as ids present in DT files.
CRs-Fixed: 2248380
Change-Id: I48d121e7343a695d67fc82da0a5c335970ccb819
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Add codec entry for bolero codec under proc codecs list.
Update the names of wsa-macro gain offset and mode for
wsa8810 variant to avoid conflict with wcd9335.
Change-Id: Icaa2ef7c2f7253060cd7cccd44130b0b12dc0713
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
In vipertooth, both wsa-macro and wcd9335 are present.
wcd9335 doesn't have wsa attached, and wsa-macro supports wsa
attached which defines spkr wsa controls. wcd9335 driver needs to
avoid register same controls if wsa is not attached to it.
Change-Id: Ia3db8982b5214ade95e6d8f27a44a68e20b772a0
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
With pre-processing applied, it is possible that the processed
number of channels could be different than the number of channels
that voice wakeup can run with. In such cases, the channel mixer
should be setup to downmix the channel. For voice wakeup to detect
keywords properly, preprocessed channels cannot be mixed hence
the channel mixer is always setup with unity co-efficients or 0
to either select or drop the channel. In this case the channel mixer
acts more like an channel selector.
Change-Id: I79b578b56ad5484e27f433404a5371540618a2ae
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Based on the type of pre/post processing, it is possible that
the processed channel count could be different from the input
channel count. As an example, the FFECNS processing block
could accept 3 channel input and has the ability to output
upto 9 channels of processed data. In cases like these, the
stream side needs to know the processed channel count to set
up its own configuration. Change adds functionality in
routing driver to read the processed channel count.
Change-Id: I06c365f8c53270712709631bc23649d37434f405
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Add support to dynamically configure channel mixing weightage
coefficients for both ASM and LSM sessions.
Currently the code is executed only for LSM session and can be
extended to ASM as well.
Change-Id: I727ea6fa2d3a99bbf6811005c5733535f680891b
Signed-off-by: Chaithanya Krishna Bacharaju <chaithan@codeaurora.org>
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
It is required to know the number of output channels for any
particular app_type so that channel mixing can be performed
if the channels do not match as that of the listen stream.
Add new Listen app type config V2 mixer control that reads the
num_out_channels field along with the others.
Change-Id: I49a74004e12dfa5a4c1ebaac4ac065acc6ff5bc3
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
With multichannel voice activation support in LSM, it could be possible
that the input media format/hw_params to LSM would be different than
the output media format/hw_params. This change decouples the input
and output hw_params for LSM. The output hw_params are obtained through
ALSA pcm_hw_params operation, whereas the input hw_params are obtained
though the LSM_SET_INPUT_HW_PARAMS ioctl to LSM.
At the same time, the below parameter IDs are added to send the channel
information to LSM service:
- LSM_PARAM_ID_MEDIA_FMT_V2
- LSM_PARAM_ID_LAB_OUTPUT_CHANNEL_CONFIG
Change-Id: Ie53a087b0ec54e83c4eba93a0828f9bdd6cc147d
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Fix proper name for rx1 dp port widget for
proper registration of the dp route.
Change-Id: I31894c0b1f66ed8848f533728f3ca07ec9fefd34
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add support for audio drivers compilation on kernel-4.14.
Change-Id: Id7689cef4ae7cdb6711fed386d2a6b0d427b3fc3
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Comparison of headset threshold during special headset detection is
not proper. This results in to improper detection of special headset
and recording usecase failure on special headset. Fix the special
headset detection issue by adding proper check condition while selection
of headset threshold from device tree.
Change-Id: I4c338ded1bcb9fa643e1584eb23c6260fe52acee
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
soundwire bus driver changes to support new soundwire
master driver for Talos/vipertooth.
Change-Id: I70e52a72edd80abc72ccb99b29b1a642debec257
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
This change is to add support routing for codec dma
interface backends and LSM front ends.
Change-Id: Ia0d6a5a5969ca1a18ceed2b55b634146ecc3f956
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Send additional port types information from machine driver
to wsa required for new soundwire driver.
Change-Id: Ia3188cfe6e33dd5b219a12900cb0d04ca03fd02c
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Add __user attribute for msm_lsm_ioctl's input parameter
"*arg" to explicitly identify it as user space pointer.
Change-Id: I33e8a23cdef9eee9a55b77bb017716ccf2ba5f81
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
