Return DP_SW2HW_MACID if per_pdev_lmac is set.
This is needed when we need to get target pdev_id without
doing pdev lookup.
Change-Id: If83f29bbcf23175708ba7eaf58e01e040ccb5a45
This mode is supported through hw_mode_id 7. A special mode for
IPQ8074 platform alone to bring up single pdev alone on 2G mode.
FW would advertise the mode 7 support through the WMI service
ready message and this mode will be the default mode for AP-HK10 alone.
Added preferred_hw_mode and target_pdev_id into dp structures so that
they can be used to configure the dp rings for this particular mode.
Also changed the lmac_id to target_pdev_id mapping for mode 7.
Change-Id: I3aae46fea13132eebaf7d37cff68ef517253d229
Currently, in monitor mode, once the status ring is reaped
we do not check again if there are new entries added in the
ring during the monitor ring descriptor processing. This
can cause backpressure on monitor rings when there is very
high throughput or a bursty inflow of packets.
Add the logic to continue reaping the monitor rings, until
the work budget or a time quota is not exhausted.
Change-Id: Iee95ac8aec92eabb3a8037b1dd9cf0c6e1dbe10b
CRs-Fixed: 2650480
Add following changes:
a. Add CDP API to config full monitor mode
b. HTT configuration changes
c. Init/Deinit changes for full monitor mode resources
CRs-Fixed: 2632442
Change-Id: I06db5194031b3ea0f0c1e5deda20df4bc0faa0b9
pdev_id is being initialized with 0. Since 0 is valid pdev_id, though
pdev is not present for that id, it is being accessed.
Initialized pdev_id to 0xFF by default. Added checks on API to
detect valid pdev_id value corresponding to lmac_id
Change-Id: I2b2a38783615494ccc08e265702815f7e562214b
Packets delivered to FISA via exception err path doesnot have TLVs.
FISA handling requires additional TLVs. dp rx core handling
skips TLVs, save TLV length info in nbuf->cb so that TLVs
are recovered back in FISA.
Change-Id: I53fab2e19abcbf82697ea6f53a4ddf3ea0dd0699
CRs-Fixed: 2620844
Break up the 2MB descriptor bank memory allocations for WBM
idle link ring. Use multiple page allocation and populate the
WBM idle link descriptor ring with physical addresses of each
DMA page allocated in the descriptor bank.
This is to ensure that no requests for contiguous memory
allocations are made that might result in allocation failures.
For MCL set the page size to 4KB and leave it to max_alloc_size
cfg ini param for WIN specific code.
Change-Id: Iec30321044827c0174366cc02df25a42d38309e0
CRs-Fixed: 2565817
Host queries for reo hw stats by sending reo queue status command
on all the rx tids. After sending host waits to receive for all the
rx tids reo hw stats. If the hw stats reo status is not received for
all the rx tids with in the specified timeout value corresponding
peers's reference is released. In parallel if disconnect happens
from userspace, there is always a chance to access the freed rxtid
reference in rx hw stats callback. So in case of rx hw stats event
timeout ignore processing the reo command status rx stats callback.
Change-Id: I0aba346a25564a3c29751f1f5a1d4e9204b93d33
CRs-Fixed: 2619720
Peer key security type is set in cdp_set_pn_check,
this API is called in key install step, but only
update Ucast field even if in Mcast key install.
This may be set wrongly if Ucast and Mcast security
modes are different. Add a new API to set security
modes of differ key types separately.
Change-Id: Icaa63139d117de75633ca1f81eb618c6b9294b53
CRs-Fixed: 2617461
Maintain packet counters for each peer based on protocol. Following 3
protocols are supported
* ICMP (IPv4)
* ARP (IPv4)
* EAP
Change-Id: I56dd9bbedd7b6698b7d155a524b242e8cabd76c3
CRs-Fixed: 2604877
A framework is added where the filters for every
mode are stored on a radio instance. Whenever a mode comes
up, it stores the filters in the radio and calls a
common API which iterates through all the enabled
mode filters and loops through them to create a
superset of filters which is sent to HTT.
This framework can be extended for new feature addition
which set filters for the monitor status and monitor
destination rings.
Change-Id: I9b739af2086bbe261b65c57af0a5bd867294f30f
CRs-Fixed: 2585872
Currently cdp ops are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
Also remove the ops which are used to store
and retrieve such handles, that no more needed.
- register_peer
- clear_peer
- change_peer_state
- peer_get_ref_by_addr
- peer_release_ref
- peer_state_update
- get_vdev_by_sta_id
- register_ocb_peer
- get_peer_state
- get_vdev_for_peer
- update_ibss_add_peer_num_of_vdev
- remove_peers_for_vdev
- remove_peers_for_vdev_no_lock
- copy_mac_addr_raw
- add_last_real_peer
- is_vdev_restore_last_peer
- update_last_real_peer
- peer_detach_force_delete
Change-Id: I4a41211464a30e018e8b73b8e9b91c7a509327b4
CRs-Fixed: 2541711
Currently cdp ops are given pdev/vdev handle
as its arguments, which is directly accessed
in those APIs. This can cause a race-condition
in access of the respective handles if it has
been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id/vdev_id which will be used to get the
respective handles, and hence avoiding unwanted
access of the handles if it has been deleted.
Also deleting few ops which stores and retrieves
such handles and adding ops to set/get pdev params.
- txrx_get_psoc_param
- wdi_event_sub
- wdi_event_unsub
Change-Id: Id089d9b6b4737d700d2436e2081291a3741affb5
CRs-Fixed: 2541658
Change set 2 of ctrl_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I3f180c9c360d564f0b229b447074ad23b7c0a737
Change set 1 of the ctrl_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: Iedf6dea2215d3d04b2212c71c8ec8c7328c559e8
multipass_rx_pkt_drop is peer level stats counter
used to count multipass rx packet dropped frame.
Accumulate this counter at vdev and pdev level.
It also initializes multipass_en flag to false at
vdev attach.
Change-Id: Idaa85a71c80eefb9359abb026402b71aa28ad6a2
CRs-Fixed: 2595551
1. Move all LMAC rings to SOC from pDEV
2. Dynamically obtain lmac->pdev mapping while handling LMAC interrupts
Change-Id: Ib017d49243405b62fc34099c01a2b898b25341d0
Change cmn_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I5716a87cad56b1dfe8dd56f193bbb6ff923a6af1
Currently in dp_rx_wbm_err_process, we donot handle
HAL_REO_ERR_BAR_FRAME_2K_JUMP and HAL_REO_ERR_BAR_FRAME_OOR REO errors.
Add support for the same.
Change-Id: I22147fcd2d531c1e08214626796994593ffeb3a6
CRs-Fixed: 2580876
Local peer_id is being cleaned up across DP, HDD and PS/WMA.
So, any references to local peer_id/sta_id will be replaced
by peer mac address and all interactions between the layers
will be based on peer mac address.
Cleanup local peer id usage from DP APIs.
Change-Id: I930e1c6a09092a373c093239632d6f310fee18e2
CRs-Fixed: 2529041
Local peer_id is being cleaned up across DP, HDD and PS/WMA.
So, any references to local peer_id/sta_id will be replaced
by peer mac address and all interactions between the layers
will be based on peer mac address.
Cleanup unusued DP APIs which are based on local peer_id.
Change-Id: Idd95bc640ca7e36a427be7202935034d4ed58979
CRs-Fixed: 2529026
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles, if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles, if
it has been deleted.
Converged misc_ops
- tx_non_std
- get_opmode
- get_tx_ack_stats
- set_ibss_vdev_heart_beat_timer
- hl_tdls_flag_reset
- set_wisa_mode
- txrx_post_data_stall_event
- update_mac_id
- pkt_log_init
- pkt_log_con_service
- get_num_rx_contexts
- set_wmm_param
- flush_rx_frames
- bad_peer_txctl_set_setting
- bad_peer_txctl_update_threshold
- txrx_data_stall_cb_register
- txrx_data_stall_cb_deregister
- vdev_set_driver_del_ack_enable
- get_intra_bss_fwd_pkts_count
- mark_first_wakeup_packet
- register_pktdump_cb
- unregister_pktdump_cb
- pdev_reset_driver_del_ack
- runtime_suspend
- runtime_resume
CRs-Fixed: 2539811
Change-Id: I3080df033d6411d7078a322224b914bda2fddc0e
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged flowctl_ops
- flow_pool_map_handler
- flow_pool_unmap_handler
- dump_flow_pool_info
- tx_desc_thresh_reached
CRs-Fixed: 2539812
Change-Id: I084d3878df84778622340e87bddf90acd3e669d6
Add support to account for TSO jumbo packets on the
Tx path and print the statistics using dumpStats 3.
Change-Id: I6cc446df5c84e3ac436d922935fcd559e0704ec5
CRs-Fixed: 2356244
Add the soc context for ol_txrx,
The soc layer is used to hold the ol_pdev context.
CRs-Fixed: 2539807
Change-Id: I751ad61de55db9d86624b8b5e18b0981ffb0338d
Pass pdev to dp_peer_stats_notify API instead of de-referencing
this from peer structure.
Change-Id: I5dc679283f5822f44b4140aefb3aee44a826c720
CRs-Fixed: 2500647
Cleanup dp_get_vdev_by_sta_id to be peer mac address based
from local peer id based.
Also, modify the API cdp_peer_get_vdev_by_sta_id with additional
argument for peer mac address.
Rename cdp_peer_get_vdev_by_sta_id to cdp_peer_get_vdev_by_peer_addr.
Change-Id: I889538b5ea7ebac8973dcaaa5ebdad1ac495e791
CRs-Fixed: 2504569
Cleanup dp_clear_peer to be peer mac address based
from local peer id based.
Also, modify the API cdp_clear_peer with addition argument
for peer mac address.
Change-Id: I1bd3fab1b9510b5f1d4476e11b617fcb6417f2c4
CRs-Fixed: 2503774
In case of peer reuse case rx_tid locks are destroyed as
part of peer cleanup and are not initialized again. So while
deleting this peer as part of unref delete peer cleanup is done
which again tries to destroy the rx_tid locks which were already
destroyed. This leads to assert complaining destroying lock with
out initialization. So dont destroy the rx tid locks in case of
peer reference reuse.
Change-Id: I860de558950009cae6f62385dd665badfe9964e0
CRs-Fixed: 2504973
Tags are programmed using wlanconfig commands. Rx IPv4/v6
TCP/UDP packets matching a 5-tuple are tagged using HawkeyeV2 hardware.
Tags are populated in the skb->cb in the REO/exception/monitor data
path and sent to upper stack
CRs-Fixed: 2502311
Change-Id: I7c999e75fab43b6ecb6f9d9fd4b0351f0b9cfda8
Do not send the WMI command WMI_PEER_REORDER_QUEUE_SETUP_CMDID
to target if roaming is in progress, as there is a discrepancy
in peer information between the host and firmware when roaming
is in progress
Change-Id: I8e91635b56257bb29972898a29c454123f7cdb8e
CRs-Fixed: 2490238
Add code to remove void pointer usage for hif_handle
and use opaque pointer hif_opaque_softc and also use
cdp_soc for opaque DP soc handle
Change-Id: I2896f7704ffb809214c5b08756c4b8673307fd9e
CRs-Fixed: 2487247
Make change to remove void pointer usage in DP cal client
instead use cdp opaque pointers.
Change-Id: Ie966ebb7b6bb937d4ee1d6dce3b040804e61ac37
Crs-Fixed: 2484412
Add code to remove void pointer usage for dp_soc
and use original dp_soc structure inside htt_soc
Change-Id: Icdc26ecdb33d565c43dbc101584069808b31c1a0
CRs-Fixed: 2484403
Add code to remove void pointer usage for hal_srng
and use opaque pointer dp_hal_ring_t instead.
Change-Id: I6907f7376d7fe3c9180b8795bd96f49fead2ec64
CRs-Fixed: 2484404
