Use chip ID and destination peer to determine the target soc
and partner vdev for Intra-BSS in MLO case.
Change-Id: I709c52e74426c5e81b50c8063cad7669c0e7002d
In BE architecture, HW provides basic vdev stats support for upto
48 vdevs. For each vdev, there is vdev_stats_id which represents the
id of this vdev on HW. This vdev_stats_id is assigned by host and
is conveyed to HW at the time of REO TID Queue setup for the peer.
Add logic for allocation and deallocation of vdev_stats_id and
convey this id to HW.
Change-Id: If5611bf54d057ccf71c6444b5c79a26eb28df87e
CRs-Fixed: 3067843
In ME6 we are currently using a workaround to send the native wifi packet
through the exception path, as the older HKv1 hardware didn’t support
single packet AMSDU. Since, the hardware is supporting this starting
from HKv2, we are sending ME packets as normal packets to FW with
DMS indication in Peer based meta for Beryllium.
Change-Id: Ic154b438df2c811c845e7c2eaadf252985d419ad
Rx patch changes for multichip MLO
1. Create ini for rx ring mask for each chip
2. Configure hash based routing for each chip based
on lmac_peer_id_msb
3. Peer setup changes to configure lmac_peer_id_msb
to enable hash based routing
4. Rx Replenish changes to provide buffers back to owner
SOC of reo ring
Change-Id: Ibbe6e81f9e62d88d9bb289a082dd14b4362252c4
DP peer changes required for multi-chip MLO.
This change includes
1) Adding MLO peer to global peer hash at ML context
2) Add ML peer to all partner chips id to objtable
Change-Id: I230a6c1b14484c587b190a9a318fe9ffb1caea11
Define a new cdp interface to fetch peer delay stats.
Define a new cdp interface to fetch peer jitter stats.
These interface APIs will be used by upper layers to fetch delay and
jitter stats per peer for telemetry stats feature.
Change-Id: I96ee6a861fa2626e7e1fba3df7df9ec64ff7e946
CRs-Fixed: 3071493
Add support to invoke HIF runtime PM APIs in TX packet path based on
throughput level. Essentially at high throughputs, where runtime PM is
not expected to provide power gains, invoking the APIs is deterimental to
performance.
Hence invoke runtime_pm APIs based on throughput level.
CRs-Fixed: 3059712
Change-Id: I49d111bffa8a37c68abbdd54911f9ecc22430562
Add API to get dp peer authorize state.
Also modify dp_tx_get_rbm_id_li to update rbm for IPA offload
scenario
Change-Id: I0f8cca4623a1c3b840f336aa6d67740951cb6700
- Features common to both Li and BE and
their APIs are retained files at dp/wifi3.0/monitor.
- New monitor ops are introduced if there
is a requirement for divergence of API.
- Diverged API definitions for 1.0 are captured
in this change.
All of code in below files are moved to 1.0
- dp_rx_mon_dest.c -> 1.0/dp_rx_mon_dest_1.0.c
- dp_rx_mon_status -> 1.0/dp_rx_mon_status_1.0.c
Only Li and HMT specific are moved for below file
- dp_mon_filter.c -> 1.0/dp_mon_filter_1.0.c
- dp_mon.c -> 1.0/dp_mon_1.0.c
Change-Id: I44d163b27565b86068d80e1d97ec11d0b4a081d4
CRs-Fixed: 2991248
This change is used to provide an API for PMO module to
check whether there are pending TX frames before HOST sends
wake up indication to FW. PMO module uses this to indicate
FW whehter to discard HWDTIM.
Change-Id: Icc3271e87e376e3313fddc5f4f99e39daeaf6af7
CRs-Fixed: 3046947
Add a CDP api to update the packet capture mode in dp_soc
when it get updated by user using vendor command.
Change-Id: Id0856aeeb5e1a77e1ce6fb23562fdbff4a2fb320
CRs-Fixed: 3048344
Add dp functionality to collect stats for sysfs buffer.
Add both host and fw stats.
Change-Id: I64f84804d36cccec9d701925d96cc7ee96943b7a
CRs-Fixed: 3035864
The multicast echo check feature is moved to hardware in
Beryllium. Enable this hardware feature and also disable
the MEC handing code for Beryllium in the host.
Change-Id: I86d319963191f3ed77aba16dcccbc659906edd9f
wds in Beryllium is managed by hardware.
Make use of hardware managedwds and disable
the corresponding wds handling done in host
for Beryllium.
Change-Id: I39f23cb40c6c5f85ada8ce59c92ff2855bb18da3
Conditionally compile scan radio special vap stats.
Also rename spcl_vap to scan_spcl_vap to better reflect
funtionality.
Change-Id: I7d7f636209f6aa12cca0a3e808d7ae1fac9f397d
CRs-Fixed: 3009837
Add CDP interface API support for pkt_log_exit,
to cleanup pkt_log_init on failure.
Change-Id: Ib50efaed5997d341d3e76c2e1dbe42856df40191
CRs-Fixed: 3012201
-Add flag to inidicate special vap configuration
-Add frame type counters while processing tlv
WIFIRX_MPDU_START_E
-Add function to update special vap rx stats
-Add dp pdev param to enable/disable special vap
stats reset
-Add function to reset special vap stats
-Add fucntion to get special vap stats
-Add CDP function to retreive special vap stats
Change-Id: Ia5de6743e472dc86c9e66b9e789c909a57025e35
CRs-Fixed: 3005425
Add support to calculate uplink delay on a per vdev basis.
The delay calculated excludes bus delays, where packet
enqueueing time and complete time are fetched from HW release
ring.
Change-Id: I4bbcbf28b197f7a87cb822a841f1f957ebcf063b
CRs-Fixed: 2958833
Define a new cdp interface structure and API for soc stats for use
by upper layers to fetch dp soc stats.
Change-Id: I314e952546551003da2ca7f69b2e1aa23c126e66
This change will receive SCS procedure based parameters from
the control path and the peer will start building it's database
for traffic classification using SCS procedures.
Change-Id: I4fd7db595e0645285a95d0561eb46343238fa337
CRs-Fixed: 2970408
Add CDP reason code support for sending DELBA request,
so protocol layer can make decisions for special cases.
Change-Id: I4e4b2e7f7232a8ab12d4c7838f97908f481dc787
CRs-Fixed: 2983553
Depreciated IPA APIs are currently getting compiled.
To fix this, adding linux kernel version check
Change-Id: I2288db34c09d60047c67a5df9081de08a6c2f62b
CRs-Fixed: 2927413
Any update to the SRNG TP/HP when the device is in low power
state would result in system errors. It is recommended to disable
EXT grp irqs and drain TXRX before sending power save enter command
to the FW. This will ensure that no interrupts are received while
in power save mode and as a result there wont be any HP/TP updates.
Change-Id: Ibf952bbc2c6d13fb3e4ca6b4845bc9cc887fa694
CRs-Fixed: 2883135
Add and initialize a preallocated pool of buffers which can
be used to replenish RX buffers. During replenish, the buffers
from the pool are used instead of allocating/mapping a new buffer
in the softirq context. This preallocated pool will be refilled
in thread context.
Change-Id: Idf3bd7d25c5d57ddba105ccd8fab672c26a184f1
CRs-Fixed: 2869345
Add CDP API to dump the SW head pointer and tail pointer
of a few important srngs. This can be used to debug or
get a direction when the device doesn't dump ram info.
dp_print_ring_stat_from_hal is not being used, since without
device force wake recipe in place, reading hardware hp/tp
value can lead to NOC errors.
Change-Id: Ib0381acb007f1b4431f6a02cd9762e461d6393e8
CRs-Fixed: 2826084
A htt message arrived after ipa context is freed as part of
deinitialization which was dereferenced by event handler
assigned to pdev->ipa_uc_op_cb, resulting in crash.
To fix this, during deinit pdev->ipa_uc_op_cb is deregistered
and assigned NULL before freeing up ipa context.
Change-Id: I8125cb104a538e88cda93960f7443129fabd850a
CRs-Fixed: 2793295
Add a new cdp datapath ops - mscs_ops for Mirrored
stream classification signalling feature. This function
will be invoked from ECM flow acceleration manager
Change-Id: I749623846395057b6ea8328c881efa8733700b0e
1. Register peer->osif_peer for per-STA netdevice delivery.
2. Wi-Fi 3-address frame packets received would be processed
through AP netdevice.
3. Wi-Fi 4-address frame packets received would be processed
through per-STA netdevice.
Change-Id: I102874ea1de9fba40ab7f0e2c32c9de1c9b4d075
During driver initialization, IPA TX and RX doorbell registers
are provided to wlan as physical addresses. With SMMU S1 enabled,
they're mapped to IOVA of wlan domain.
On driver deinit path, do smmu unmap for the two IOVA addresses.
Change-Id: I85ef1c3e99bef504abf09eebf9ace760b68f35f1
CRs-Fixed: 2768303
- Added data structure for wds ext peer
- Enhanced DP peer structure to maintain
wds ext peer data structure, which inturn
maintain pointer to osif device.
- Enhanced DP vdev structure to maintain feature
configuration, which will be updated during vdev
creation when feature is flag is set at control
psoc.
- Enhanced cdp_vdev_param_type and cdp_config_param_t
to set wds ext configuration into DP vdev
- Enhanced cdp_cmn_ops structure and corresponding
call back definitons to get peer id, which will
be saved in osif private structure and to set
wds ext peer rx.
- Enhanced cdp_ctrl_ops to send event to control
path when 1st 4 address frame is received from
backhaul.
Change-Id: Ide0ea54e7b2d480ad646fb84b6e4e3108930f986
CRs-Fixed: 2773492
The 11g and 11a connections are latency critical and
hence the tx coalescing cannot be applied on traffic
running for these connections.
Add a CDP API to save the number of low latency
connection in the dtapath vdev handle. The Software
latency manager can use this information to decide
and skip the tx register write coalescing for packet
transmission on low latency connections.
Change-Id: Iff51867447e9d4537a3637cb65d94e184e4249ef
CRs-Fixed: 2769025
